Results 1 to 13 of 13

Thread: Winter Upgrades?

  1. #1
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,289

    Winter Upgrades?

    What's everyone doing to upgrade, get faster this winter? I've already done one major upgrade, dumped my old injectors and went to Bosch 210s. I'm going to rip out the upper control arm mounts, and install the UPR adjustable upper mounts and a new anti roll bar that won't smash into the upper control arms on launch. Then, go to the track, get the best I can out of the current setup(thinking mid 8s), and then pull it apart next year and get the sleeved block, build my 6R80 and Circle D converter, not necessarily in that order. Of course, I have to rob a bank in there somewhere to fund all this. lol. So may be 6 to 10 years before I get it completed. lol.

  2. #2
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    I did a Chevy trans and new converter, a2w intercooler and rear suspension. Should run ok.

  3. #3
    Join Date
    Jan 2008
    Posts
    8,841
    Going to be waiting until spring to make hits and try to dial in the rear suspension or make change ups. Can't see doing more a this point until I can at least get it to hook on idle to 2000 foot braking it. Right now I can't get it to 60 better than a 1.90. Have got some new numbers to put into the rear shocks to try but ran out of weather. Hoping to pick up Walter's stall and trans-brake box if he still has it once I get the leave ironed out.

  4. #4
    Join Date
    Apr 2006
    Posts
    1,985
    I’m getting a new converter and changing the rear gear. Should help some.
    2008 2019 2020 2021 2022 #1 Of The Dirty Dozen
    2018 #2 Of The Dirty Dozen


    2024…. Changes coming! How much HP? ALL OF IT!

  5. #5
    Join Date
    Feb 2004
    Posts
    10,785
    Turbo, Clutch, Upgrade to a 10pt CM Cage, front & rear bumper supports, chute, Glenns Sleeper tank, MP4303 pump, ID 1050 injectors, etc etc etc etc
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  6. #6
    Join Date
    Apr 2006
    Posts
    1,985
    Quote Originally Posted by Maximus View Post
    Turbo, Clutch, Upgrade to a 10pt CM Cage, front & rear bumper supports, chute, Glenns Sleeper tank, MP4303 pump, ID 1050 injectors, etc etc etc etc
    Should be a good year!!! When are you planning on having it completed?
    2008 2019 2020 2021 2022 #1 Of The Dirty Dozen
    2018 #2 Of The Dirty Dozen


    2024…. Changes coming! How much HP? ALL OF IT!

  7. #7
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    Quote Originally Posted by Maximus View Post
    Turbo, Clutch, Upgrade to a 10pt CM Cage, front & rear bumper supports, chute, Glenns Sleeper tank, MP4303 pump, ID 1050 injectors, etc etc etc etc
    Just go ID1300, 1050 probably won't cover it.

  8. #8
    Join Date
    Feb 2004
    Posts
    10,785
    Quote Originally Posted by Silver Bullet View Post
    Should be a good year!!! When are you planning on having it completed?
    I dunno...maybe Summer.

    Quote Originally Posted by Walter View Post
    Just go ID1300, 1050 probably won't cover it.
    Then I might have to go ahead and build a bottom end as well.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  9. #9
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    8,348
    I think my round of winter upgrades is just about complete with a battery relocation, swapping the TKO600 for a 4R70W, a new fuel system, and D1X install. I was hoping to get a cage in the car but that’s probably going to have to wait.
    They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. - Ben Franklin



    1998 Mustang GT
    Coyote Swapped


  10. #10
    Join Date
    Apr 2006
    Posts
    1,985
    Quote Originally Posted by Maximus View Post
    I dunno...maybe Summer.



    Then I might have to go ahead and build a bottom end as well.


    Its a spiral.... if you want 900 plus and reliable, yes its time for a bottom end.....
    2008 2019 2020 2021 2022 #1 Of The Dirty Dozen
    2018 #2 Of The Dirty Dozen


    2024…. Changes coming! How much HP? ALL OF IT!

  11. #11
    Join Date
    Mar 2004
    Location
    Goshen
    Posts
    5,941
    Get the fuel lines made, catch can lines made and get it tuned. Also need to drop off to Andy Law and have him do the 4.10's. Sounds like lot's of cool stuff going on this winter for everybody
    98 Cobra - Bolt Ons
    2017 F-150 3.5 EB

  12. #12
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    Quote Originally Posted by 5.0calypso93lx View Post
    Get the fuel lines made, catch can lines made and get it tuned. Also need to drop off to Andy Law and have him do the 4.10's. Sounds like lot's of cool stuff going on this winter for everybody
    You mean 4.56 bro

  13. #13
    Join Date
    Mar 2004
    Location
    Goshen
    Posts
    5,941
    Quote Originally Posted by Walter View Post
    You mean 4.56 bro
    I'm a lil bitch what can I say
    98 Cobra - Bolt Ons
    2017 F-150 3.5 EB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •