Does anybody on here do high temp powder coating or ceramic header coating? Or do you have a good recommendation? Thanks. My mild steel hookers need some love.
Sent from my iPhone using Tapatalk
Does anybody on here do high temp powder coating or ceramic header coating? Or do you have a good recommendation? Thanks. My mild steel hookers need some love.
Sent from my iPhone using Tapatalk
Last edited by S281SC; 06-29-2020 at 02:19 PM.
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
Toms customs coatings in Blanchester has been doing a lot of headers in cerakote. Lots of different colors.
2014 CTS V-sport
2006-teen Black CCSB Powerstroke
Thanks I will ask. Looks like they do mostly gun parts. But they offer high temp options. I may use them on a gun project in the near future if they wont do my headers. Thank you!
Sent from my iPhone using Tapatalk
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
I was in touch with them. It sounds like they would be more than happy to coat brand new ones. They dont mess with dirty ones as it affects their blast media. I may have to wire wheel or blast them first to take them to Tom’s. But looks like they do some cool stuff on their FB page. Thanks for the referral.
Sent from my iPhone using Tapatalk
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
He did a set of stepped LS fender exit headers and mufflers I had made for a chevyII and a set of bbc headers for my buddy and they turned out nice
2014 CTS V-sport
2006-teen Black CCSB Powerstroke
What about Aesthetic Finishers in Piqua? They do real nice work.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
About Aesthetic Finishers, I live maybe 5 mins or so away from them, when I needed some things powder coated a couple of weeks ago I went to Kenny in northern Kentucky, which is like an hour and 20 minute drive one way for me. I went to AF several years ago and was less than impressed with how they ran things and how I was treated overall, I ended up not even getting the work done there. So, I had a not very good experience but maybe you'll have better luck.
Greg
Midnight Mafia
I left a message with them and am waiting on a call back.
Sent from my iPhone using Tapatalk
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
Sand blasting place on 202 / 40 in Huber is who i used to sand blast my headers clean. I dont know if they are open still or not.
LS Swapped - Locally hated now
I assume by kenny you guys are talking about killer koatings? I called him first. He cant do high temp or ceramics yet but will soon hopefully. I did get a call back from aesthetic finishes. They are booked out 6-8 weeks. I have a small blast cabinet and I think I will get them cleaned up and do a vht coating and then bake them using an oven cure. And if that doesn’t hold up maybe next year when kenny has his ceramic equipment up and running, I will use him. thanks for the input guys!
Sent from my iPhone using Tapatalk
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
I used a wire wheel on an angle grinder and followed that with blast media. Then i coated the headers with VHT black ceramic paint. I am working on “building” an oven to cure them. They look pretty good, to me at least. And considering on a 4v you cannot see them unless you are under the car, this should work. I mostly wanted to stop the surface rust.
Sent from my iPhone using Tapatalk
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
Turned out nice!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Looks like they cleaned up nicely.
Greg
Midnight Mafia
There are currently 1 users browsing this thread. (0 members and 1 guests)