Results 1 to 12 of 12

Thread: SBE 302 Turbo selection?

  1. #1
    Join Date
    Apr 2007
    Location
    Independence
    Posts
    482

    SBE 302 Turbo selection?

    I am putting together a budget turbo kit for my SBE 302 and planned to run a cheap GT45, but I have the opportunity to buy a Borg Warner S366 at a pretty good price. I already have the GT45, but am worried it won't start building boost quick enough. 1) Do you think the GT45 would pair well with the 302? 2) Would I benefit more from the S366? 3) Also open to other opinions.

    Setup is SBE 302, TFS 170s, 4150 EFI intake and elbow, E85, non-intercooled, TKO600, 3200 lbs.

    GT45: Trim: 69
    A/R: .66
    Inducer: 68.7
    Exducer: 97.8*
    Turbine:
    Trim: 92
    A/R: 1.05
    Inducer: 87.4
    Exducer: 77*

    S366: Compressor Wheel Inducer Diameter (mm): 66mm
    Compressor Wheel Inducer Diameter (in): 2.6
    Compressor Wheel Outer Diameter (in): 3.6
    Turbine Wheel Outer Diameter (mm): 80mm
    Turbine Wheel Outer Diameter (in): 3.14
    Turbine Wheel Exducer (mm): 73mm
    Turbine Wheel Exducer (in): 2.89
    Turbine A/R: 0.91
    Turbine Inlet Style: T4
    Scroll Type: Twin

  2. #2
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,289
    The gt45 will be a little laggy but the s366 should make boost quicker and be plenty for your set up. All depends on hp and et goals. But with a stick if it were me, I'd run the s366.

  3. #3
    Join Date
    Mar 2004
    Location
    West Chester
    Posts
    1,486
    I gotta ask- whats the SBE in "SBE 302" mean? Never heard that one before. Small block engine?
    2003 SVT Mustang Cobra
    11.40@124
    Pics, mods, track videos, other stuff..

    The rest of the fleet:
    2019 Edge ST
    2015 Taurus SHO
    2013 SVT F150 Raptor

  4. #4
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Id run the S366 also. The 1.05 A/R on a stock bottom end will be very slow to spool.

    - - - Updated - - -

    Quote Originally Posted by IWRBB View Post
    I gotta ask- whats the SBE in "SBE 302" mean? Never heard that one before. Small block engine?
    Stock Bottom End
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  5. #5
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,289
    https://www.theturboforums.com/threa...321736/page-27

    Great thread to read about gt45 turbos.

  6. #6
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,289
    Quote Originally Posted by draggin50 View Post
    Id run the S366 also. The 1.05 A/R on a stock bottom end will be very slow to spool.

    - - - Updated - - -



    Stock Bottom End
    Thanks, I was wondering as well.

  7. #7
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    New Facebook lingo used in the LS world!!! Don't ask me why I know this!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  8. #8
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,289
    I hate facebook, now I have another reason. Lol.

  9. #9
    Join Date
    Jan 2008
    Posts
    8,841
    Facebook

  10. #10
    Join Date
    Aug 2004
    Location
    Loveland
    Posts
    326
    Out of those two I would go with the Bog Weiner 366.

  11. #11
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by 2-Tone View Post
    Out of those two I would go with the Bog Weiner 366.
    Hahahaha!!!!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  12. #12
    Join Date
    Apr 2007
    Location
    Independence
    Posts
    482
    Thanks guys. I'll go with the S366. SBE,,,,, I have been hanging around too many LS guys

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •