Is this thing at finish line ? Who's doing the tuning ?
Is this thing at finish line ? Who's doing the tuning ?
I just can't catch a break. Doesn't even have 50-100 miles on it.
Is the blade hitting?
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Seal is going bad
That sucks! I know how much trouble you went through just getting it on. I feel for ya!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Is it oil fed? Maybe needs a restrictor in the feed line? I know a lot of companies will say not to use them, but they work when the seals are getting blown out by 100 PSI of oil pressure.
2003 SVT Mustang Cobra
11.40@124
Pics, mods, track videos, other stuff..
The rest of the fleet:
2019 Edge ST
2015 Taurus SHO
2013 SVT F150 Raptor
Mfing cars! Sorry to see this.
Man! Nothing is ever easy! I'm sorry bud.
Joe
The return line is like 4 times bigger than the feed line. You'd think that would be enough but who knows with this thing.
I think my Ysi had a -4 feed and -10 return.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
http://www.svtperformance.com/forums...-seals.679245/
See post four, I'm not sure why it's building too much pressure. I wonder if you can regulate the incoming oil pressure. 50-100 miles??? Was it a faulty blower? I had a balance issue on my new turbo that ruined my bearings and turbo seals in about 1000 miles.
Last edited by PKFIRE; 12-22-2016 at 01:53 PM.
Joe
That's a awesome idea. I don't think that would work on mine because the ysi isnt self lubricanted like Procharger blowers. Mine gets oil from the engine. Which the my motor has a pcv catch can that relieves crank pressure. So idk. Im just a garage mechanic with limited knowledge. Ive never built anything like this before.
Is the oil drain to engine higher than the oil level?
Joe
The oil return is at the very top front of the oil pan.
If it has wheels, tits or a roof it will give you problems....
Wow ! Good quote
Sent the intake and valve covers out to get the map sensor, iat sensor and 10an fittings welded in
Looks good, whatever became of the supercharger seal?
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
There are currently 1 users browsing this thread. (0 members and 1 guests)