5.0 tech article

Alright gang, I've decided to add some material to the site and I'm looking for some input.

What I'm thinking of is a general technical reference that we can use to get info for when it's time to tinker on the toys. I want to make a page that has basic material covering our beloved little pushrod mill, the 5.0L H.O. motor. What I'll include is stuff like firing order, setting timing, torque specs, how to set the TPS and other info that people can use.

I thought I'd toss it out there and see what you all had to add.

I think Brian had a good image for short belts too.

Didn't noslo have a link to alot of that type of info a while back. I remember you made him take it down because of fear of viruses or something like that.

I'm all for it...would be happy to contribute!

Mustang boy is correct I gottz a ton os stuff .. and I had teh image of teh short belts med belt and standrad belt routing as well.

Plus. specs n most of the years what heads were common with what motor and what they were found in

Automatic Trans data with exploded rebuild veiws

Plus about 50 or so different sounds clips of exhaust combo's

a lot of different engine files for cams heads etc for SBF and BBF for use with some of the desktop dyno programs.. More than you'll find anywhere else in one location


Get with me and we can work out what you need..



laterz

I have an article on puttin turbo coupe disc's rears in the stang!:D

I have the article from anderson ford motorsport, that tested like 20 mufflers, and 13 intake manifolds on a 302.

Vinny that sounds like a very good idea,cuts down on alot of repeat Q&A in the windsor forum,althow i do enjoy reading the post,this would be more like a reference library! hope to see it soon and to contribute!

Any updates on the tech info Vinny?


I can't contribute a whole lot, but I'd love to read what everyone else has to say!

I did the igniton switch a month or two ago.

I have some things I can contribute as well.

How's this project coming along BTW ?? :confused:

Quote:

---

Originally posted by Katmandu
I have some things I can contribute as well.

---

If you have information that you would like to email, please send it to vinny5oh@stangbangerz.com

Quote:

---

How's this project coming along BTW ?? :confused:

---

I was planning on finishing it the week after Xmas when I get some off work. I have it started, you can peek at it here.

This will give me something to do during work ! ! !

http://www.jason.fletcher.net/tech/tech.htm

Various Web Tech Articles !

http://www.angelfire.com/fl/procrastination/motor.html - Compression calculater

http://www.advanceadapters.com/acrobat/ftrans.pdf - auto trans guide

http://www.mustangcentral.net/tech/cage.html - Roll cage installation

http://www.mustangcentral.net/tech/5lug.html = 5 lug conversion

http://www.mustangcentral.net/tech/e7.html = e7 head porting

http://www.mustangcentral.net/tech/351.html - 351 engine swap

http://www.mustangcentral.net/tech/stroker.html - stroker info

From http://www.mustangcentral.net/articleindex.html - got most of the good ones

http://www.miata.net/sport/Physics/ - car physics

http://www.kevinstang.com/Ninecase.htm - 9 in ford article

http://www.mustangcentral.net/tech/part.html - ford parts number

http://www.mustang123.com/ - vintasge mustang how to's

http://mustangmonthly.com/howto/173_...body_problems/ - body probs how to fix

http://www.carbdford.com/viewforum.php?f=11 - various stuff

http://www.5lmustang.com/4cyl.html - 4 cyl to 5.0 guide

http://www.jason.fletcher.net/tech/tech.htm - alot of tech for carbd mustangs

http://www.sb.net/wkeller/mustangs-faq/ - mustang FAQ !

http://www.blazinlow.com/tech/body.htm - shaved door handles

http://hotrodders.com/kb/body-exteri...r_handles.html - more on shaving door handles

http://hotrodders.com/kb/body-exterior/articles.html - FAQ Auto body stuff

BUNCH of good Tech info here as well.........

http://www.50tech.com/articles/

Cool ,........Doug ( CapriStang) could contribute a " How to run 13.70's on a 200 shot" column. "Recipe for frustration":D

Blow thru carb - turbos
http://www.hangar18fabrication.com/blowthru.html

I stil have a bunch of tech articls, desktop dyno files, sound clips for exhaust alongwith that article on which one really produce the most HP, blow thru artilcles and parts lists, tranny specs, exploded view digrams etc.. Oh and I may have a connection too some of teh service manuals on cd/dvd

I got too much stuff to email you so let me know what you want to do

FTP? burn the stuff to dvd's?

If I remeber correctly isn't this site setup based on disk space used? if so your gonna need a bunch more! :)

yeah man I think it would be cool to have some quick basic info to pull up like firing order, setting TPS sensor, etc. i also think that the other mods would be cool, I don't know if they should maybe in another location?

this would help a lot of us out, especially when you're already frustrated with a problem and don't need to waste time trying to find info all over tha Net.

this one is a no brainer to most of you probably, but how about a timing setting proceedure along with the suggested settings that are there :cool1:

Lots of tech stuff here.

http://sbftech.com/index.php/board,8.0.html

found ALOT of tech here, on fox ans SN95's, tells you easy ways to do a single turbo/twin turbo, the basic supporting mods to do a turbo set up, alot of things

http://www.allfordmustangs.com/AFM_tech/

Quote:

---

Originally Posted by quik lx

I have an article on puttin turbo coupe disc's rears in the stang!:D

---

Another guy I miss....Although he isnt dead,just moved away.:(