Happy New Year all!!

[S281SC]

New year new goals…

Car goal #1: get deep into the 9s.

I know guys here are going for 7s and 8s. Last year was my first time in the 10s in a car. Got down to 10.3. Best was 10.4s on a 100 shot, pushed a 150 shot to 10.3 but the clutch was not having it. I got a nice ram adjustable piece that i expect to solve my woes, but also open up a learning pathway.

What do you all have as goals or plans?


Sent from my iPhone using Tapatalk

[Walter]

Couple small projects on my 2016 car. Nothing major, just wanna have fun with the car and drive it more.

[MrRogers88GT]

Built 4R70W, Converter, Smaller Blower Pulley.. maybe more.

Sent from my Pixel 5 using Tapatalk

[Walter]

Built 4R70W, Converter, Smaller Blower Pulley.. maybe more.

Sent from my Pixel 5 using Tapatalk

Oh yea!

[gzbs197]

New converter. 8 second time slip.
Compete in some no prep events
Win an event.

[k062693w]

Get a Car !!! LOL

[draggin50]

I just want to get one finished!

The red one is a tune away from being done for now. Still have to make the decision on what to do with it. Mini tubs, 427, turbo...

The Gould car runs, just need to get it finished up. Lacking motivation! Would love to see some low 10's on motor and maybe throw a little kit on it down the road.

[PKFIRE]

Happy New Year! I would like to get a new clutch for the 03 Cobra to try to get the car into the 10s. I’m hoping to get the boost issue fixed on the Volvo. Need to get a stronger rear end, high stall torque converter for it and get the tune sorted. Not in hurry but eventually go E85 with it. I got a 525LPH for it for Christmas and larger intercooler.

[Silver Bullet]

Happy New Year!!!!

Looking to work on suspension mostly. Ready for a few upgrades right now. Want to maybe go 7.6-7.7 @ 180 plus....

[SnailPony]

Happy New Year!

Goal is to get my car buttoned back up and ready for spring. I have been working on it as time allows, and getting close.

Did wheels, tires, D1sc procharger setup, new radio and other interior upgrades.

Want the car running again and would like to see that infamous 11 sec. time slip (lol for guys knowing I was chasing this NA on street tires).


Sent from my iPhone using Tapatalk

[Walter]

Happy New Year!

Goal is to get my car buttoned back up and ready for spring. I have been working on it as time allows, and getting close.

Did wheels, tires, D1sc procharger setup, new radio and other interior upgrades.

Want the car running again and would like to see that infamous 11 sec. time slip (lol for guys knowing I was chasing this NA on street tires).


Sent from my iPhone using Tapatalk

Coyote?

[cstreu1026]

I’ve got a Pro Charger D1-X , fuel system, and Freddy Brown 4R70W that’s needs to be installed. I’d love to have it all done by April but we’ll see.

[5.0calypso93lx]

Happy new year y'all!

Goal is to get the pile of parts installed on the Cobra and get it tuned so it runs better.

[Maximus]

Happy New Year!

I dunno, Im burnt out on Cars right now and couldnt give 2 shits if anything gets done on the Mustang. Hell, Id let it go for the right amount of money...:(

[k062693w]

Happy New Year!

I dunno, Im burnt out on Cars right now and couldnt give 2 shits if anything gets done on the Mustang. Hell, Id let it go for the right amount of money...:(


Well what's a "Right Amount" ???
:D :D :D

[SnailPony]

Coyote?

Yes sir. This was before the blower install.

Ps. This also has your old fuel pump in it too!

https://uploads.tapatalk-cdn.com/20220107/7b7bda8e2ba35a82ed80be91b4832720.jpg


Sent from my iPhone using Tapatalk

[draggin50]

Yes sir. This was before the blower install.

Ps. This also has your old fuel pump in it too!

https://uploads.tapatalk-cdn.com/20220107/7b7bda8e2ba35a82ed80be91b4832720.jpg


Sent from my iPhone using Tapatalk

Man that looks killer!

[SnailPony]

Thank you.

Trying to keep it tidy with all the added blower stuff lol.


Sent from my iPhone using Tapatalk

[k062693w]

Yes sir. This was before the blower install.

Ps. This also has your old fuel pump in it too!

https://uploads.tapatalk-cdn.com/20220107/7b7bda8e2ba35a82ed80be91b4832720.jpg


Sent from my iPhone using Tapatalk



Damn !!! That looks Factory !!!
KickAss Job !!!

[Walter]

Post up the blower pics!!! Coyote + Procharger = FAST!

[SnailPony]

Damn !!! That looks Factory !!!
KickAss Job !!!

Thank you sir


Sent from my iPhone using Tapatalk

[SnailPony]

Post up the blower pics!!! Coyote + Procharger = FAST!

https://uploads.tapatalk-cdn.com/20220108/1f8a10603adbfbb8f2d1d3293112a6cf.jpg

Still a work in progress. Can post pics when all back together.


Sent from my iPhone using Tapatalk

[draggin50]

Very nice!!!

Bet that will be a real fun car!

[Maximus]

Nice!

[SnailPony]

Very nice!!!

Bet that will be a real fun car!

Honestly I had fun with it when it was NA. This car used to have a turbo 306 so the na coyote just never seemed as quick as the last setup. This blower should take care of that. I think it will make more power on low boost than the turbo motor ever seen lol.


Sent from my iPhone using Tapatalk

[draggin50]

Honestly I had fun with it when it was NA. This car used to have a turbo 306 so the na coyote just never seemed as quick as the last setup. This blower should take care of that. I think it will make more power on low boost than the turbo motor ever seen lol.


Sent from my iPhone using Tapatalk

Yeah very true. 6 psi on the coyote will probably make well over what a stock block 306 would make on 12.

[coleary1992]

I’m hoping to finish my sn95. Waiting on the 351 to come back from the builder and I need to finish the tube front, finish wiring the Holley and get it tuned and the front end painted.


Sent from my iPhone using Tapatalk

[k062693w]

I’m hoping to finish my sn95. Waiting on the 351 to come back from the builder and I need to finish the tube front, finish wiring the Holley and get it tuned and the front end painted.


Sent from my iPhone using Tapatalk



You know the Rules !!!

Pics or it didn't happen !!!

[coleary1992]

[emoji1787] let me try and remember how to do pictures on here


Sent from my iPhone using Tapatalk

[coleary1992]

https://uploads.tapatalk-cdn.com/20220109/2355e53542f17e804198d8878706e0b2.jpg


Sent from my iPhone using Tapatalk

[draggin50]

https://uploads.tapatalk-cdn.com/20220109/2355e53542f17e804198d8878706e0b2.jpg


Sent from my iPhone using Tapatalk

Nice! Which kit is that front end?

[coleary1992]

Codion out of bowling green ky area. Fit great, pre notched. Just hold and weld. Start to finish was about 5 hours.


Sent from my iPhone using Tapatalk

[Silver Bullet]

https://uploads.tapatalk-cdn.com/20220108/1f8a10603adbfbb8f2d1d3293112a6cf.jpg

Still a work in progress. Can post pics when all back together.


Sent from my iPhone using Tapatalk

Very Nice... Clean also.... need more pics of this ride!

[2Fast4You]

Happy New Year everyone, I think that I'm finally able to pull myself out of hibernation and get motivated again, I'm trying. Family has me covered and smothered.
I'm currently working on cleaning up the wiring and wiring in the N20 system, I've been facing an issue with the front brakes dragging, it appears that I have gotten the front driver side working well and now working on the passenger side, not sure what's going on but I'll figure it out eventually. Also going to look at changing the suspension up with some better coil overs front and rear, looking at Afco I think for the time being.

[2Fast4You]

Happy New Year everyone, I think that I'm finally able to pull myself out of hibernation and get motivated again, I'm trying. Family has me covered and smothered.
I'm currently working on cleaning up the wiring and wiring in the N20 system, I've been facing an issue with the front brakes dragging, it appears that I have gotten the front driver side working well and now working on the passenger side, not sure what's going on but I'll figure it out eventually. Also going to look at changing the suspension up with some better coil overs front and rear, looking at Afco I think for the time being.Going to use these instead of the little square ice cube style relays, it should make things easier.https://uploads.tapatalk-cdn.com/20220110/80b64e4e5d7547a29fce2f3a4c61efa7.jpg

Sent from my SM-G975U1 using Tapatalk

[draggin50]

Codion out of bowling green ky area. Fit great, pre notched. Just hold and weld. Start to finish was about 5 hours.


Sent from my iPhone using Tapatalk

Ok, that seems like the most popular kit right now. Ive seen them on facebook. They look like real nice pieces.

- - - Updated - - -


Going to use these instead of the little square ice cube style relays, it should make things easier.https://uploads.tapatalk-cdn.com/20220110/80b64e4e5d7547a29fce2f3a4c61efa7.jpg

Sent from my SM-G975U1 using Tapatalk

Let me know how you like those.

[SnailPony]

Very Nice... Clean also.... need more pics of this ride!

Lol thanks man


Sent from my iPhone using Tapatalk