1969 Mustang with LMR Series 3 Rims in Bronze

[Ackbar00]

I ended up not getting the Kenne Bell, so I went this route.


Decided I wanted to change up my rims from the 2004 Mach 1 wheels to something a little different. As far as I know, I am the first to put this combo on a classic Mustang.



This is the kit that I purchased:
https://lmr.com/item/WTK-464816Z/mustang-sve-series-3-wheel-tire-kit-bronze-htr-z2-94-04

For my suspension setup:
I am running 1" spacers on the front and rear.
The fronts have have 1" lowering springs with an extra 1/4 coil cut out:
https://www.cjponyparts.com/contour-coil-springs-1-lowering-1967-1973/p/CSC6773/
The rears currently have the stock leaf springs and a 1" lowering kit:
https://www.cjponyparts.com/rear-end-lowering-kit-1-1967-1970/p/CLK1042/


And that is it. No fender rolling. And everything is fine in the front with nothing rubbing from steering wheel lock to lock.

I think it turned out awesome! I just wheeled it out of the garage, so really didnt take the time to clean up the tires yet.


Old Mach 1 rims:
https://i.imgur.com/2OhaEqQ.jpg



And finally:



https://i.imgur.com/mVKWQ2e.jpg

https://i.imgur.com/Ew5tIhQ.jpg

https://i.imgur.com/Eb7pCvB.jpg

https://i.imgur.com/CSHV2Dc.jpg

https://i.imgur.com/KGvtc6g.jpg

https://i.imgur.com/53oHq4x.jpg

https://i.imgur.com/JLjnxB5.jpg

https://i.imgur.com/SlTPpl1.jpg

https://i.imgur.com/0GbIkUE.jpg

https://i.imgur.com/q9fHQKg.jpg

https://i.imgur.com/rN9n4to.jpg

https://i.imgur.com/2KzYGP6.jpg

[draggin50]

Man that's a huge difference! Looks real good!

I always loved the front of the 69. One day, I will have a 69 Mach 1...

[Walter]

Looking good! You can go plenty fast with just a carburetor.

[Kwik92GT]

Looks killer with the new rims! Digging the headlights too! :cool1:

[k062693w]

Looks Killer Paul !!!

[RACEME]

Looks great. Very nice car

[mustangboy]

I dig it

[NXcoupe]

Paul, it looks killer. Love the stance and the wheels look great.

[Maximus]

Wow! Amazing what a set of rims can do for a car. Looks great!

[Rick93coupe]

It looks great man!!

[2Fast4You]

Looks Good...

[cyah92]

Your car is pretty badass.

[Ackbar00]

Its getting there, I ordered some 4.5 1" drop leaf springs for it. Also got a Willwood front disc conversion. I am debating getting a 9" for it, I dont think my power level warrents it, but I hear upgrading the 8" is just a waste of money. Like a 10 bolt in a 4th gen. After that, a coilover conversion in the front (really wish I would have done that from the start, just didnt know.)

[50dan]

Its getting there, I ordered some 4.5 1" drop leaf springs for it. Also got a Willwood front disc conversion. I am debating getting a 9" for it, I dont think my power level warrents it, but I hear upgrading the 8" is just a waste of money. Like a 10 bolt in a 4th gen. After that, a coilover conversion in the front (really wish I would have done that from the start, just didnt know.)

Nice ride. What coilover kit are you looking at I’m considering some for my 69 too.

[Ackbar00]

The QA1 is the cheapest:
https://www.cjponyparts.com/qa1-pro-coil-front-coilover-system-single-adjustable-with-450lb-spring-rate-1967-1973/p/MS40210450/

Prolly go with that one. Everything else goes up to $1000 or more.


EDIT: These seem promising as well

https://www.ebay.com/itm/Viking-Warrior-Front-Coil-Over-Shocks-1969-70-Mustang-67-70-Cougar-SB/131889740688?fits=Year%3A1969%7CModel%3AMustang&hash=item1eb53dbb90:g:gyEAAOSwEg9enfzC

[draggin50]

The Viking stuff is pretty nice and probably well worth the money.

[Ackbar00]

The Viking stuff is pretty nice and probably well worth the money.

The more I look at it, the more I like it. Has double adjustable shocks and uses the stock shock "hangers" as opposed the QA1 for the same price.

[beefcake]

looks great, wish i had time to mess / drive a classic

[redfirepearlgt]

I know this sounds insignificant but have you thought about color matching the red decimal on the 5.0 emblems to match the wheels? Just curious. Looks nice.

[IWRBB]

I like it. A lot of older cars look weird when the owners go for the modern low profile tires, big wheels, huge offsets etc, becasue they take it too far- but that looks good. Wheel color works well with the paint too.

[IWRBB]

I know this sounds insignificant but have you thought about color matching the red decimal on the 5.0 emblems to match the wheels? Just curious. Looks nice.

That'd look good.

[Ackbar00]

Done a bit of work to it. Ended up ordering a QP 9" for it. Got the rear sitting just about perfect now. Has a little bit of rubbing with the fender lip, so I am going to be cutting them out today.
https://i.imgur.com/rPPUfMk.jpg

https://i.imgur.com/Dzst5nd.jpg

https://i.imgur.com/GbL6K2X.jpg

Front needs to come down a bit to match. I sold my old rims, so I did order that Viking Coilover setup, supposed to be here in a few weeks.

[Rick93coupe]

Looking good Paul. That's a nice looking rear end housing too.

[draggin50]

That should hold a little more power!!

[Kwik92GT]

Looks really good, that 9" is sweet.