mustangboy
12-17-2018, 10:34 PM
I just installed a new radiator and electric fans and have a few left over parts I won't be using. First I have a brand new UPR stainless hold down. We welded a box on the front of my new radiator for the fans so this won't fit. Still has protective film on it. Next I have the canton over flow bottle for use with the stock coolant level sensor. My fans are too big so the bottle won't work. Will work fine with stock shroud or smaller single fan setup. I have the stock shroud and radiator as well. The radiator may be able to be used after a good flush but couldn't keep up with my upgrades, does not leak at all. Shroud and bottle are in great condition. Have a new stock fan that we used with the original fan clutch. I believe the hold down was $50ish and the bottle was $150. Make a reasonable offer on any or all of it. Also have an old taurus single electric fans I was gonna use but went with a contour dual fan. https://uploads.tapatalk-cdn.com/20181218/9d720e34241e5dbf42d63f97f40f9149.jpghttps://uploads.tapatalk-cdn.com/20181218/3fb65787f8cdad93f1c70eed5471cfe2.jpghttps://uploads.tapatalk-cdn.com/20181218/5da28a3d0fa2b958160ed04e9bfd384d.jpghttps://uploads.tapatalk-cdn.com/20181218/515d6cc3e41bf04e0607409e449bb142.jpg
Sent from my Pixel 3 XL using Tapatalk
Sent from my Pixel 3 XL using Tapatalk