What are the elves bringing your car for Christmas???

[redfirepearlgt]

Just got a steal of a deal on a brand spanking new Circle D 258mm 2c converter for 10% off and free shipping direct from Circle D. That should wake the car up very nicely. 3200-3400 flash stall. That along with a pair of adjustable rear shocks to replace the Lakewood 50/50's next spring should wake the car up off the line much better.

SOOOOOOOOOOOOOOOOOOOO... what is the old fat elf and his helpers bringing you for your ride this year????

[adragon72]

So far I scored a flying magnet crank trigger kit. But I am hoping to get switched over to 31 spline and 5 lug and this 3.55 gear I got.

But most of all to not take the car down so far that I cant run till fall again.

That circle D should really help Chad is Finish line doing your install?

Adam

[redfirepearlgt]

So far I scored a flying magnet crank trigger kit. But I am hoping to get switched over to 31 spline and 5 lug and this 3.55 gear I got.

But most of all to not take the car down so far that I cant run till fall again.

That circle D should really help Chad is Finish line doing your install?

Adam

Definitely. Brian and Brandon and the gang are my go to. They are good at what they do and great at letting me be involved in upgrades as well, so I don't feel like a complete 4F. LOL! For their pricing there isn't much reason to bother doing it myself as reasonable and professional as they are. I'd spend way more in the building of a garage and specialty tools in order to do most things myself than what I will spend hiring them to do the work over a lifetime of cars at this point in my life.

Looking forward to seeing that turbo foxbody get BIZZY next season Adam.

[adragon72]

Chad I don't blame you one bit for having it done.

we need to all get together for dinner here soon.

[2Fast4You]

My car is getting some attention on the carb and fuel system supply for sure , it needs to be spot on for the power adder this coming spring. As Shannon would say, it's just a small 50HP shot. Lol

[redfirepearlgt]

My car is getting some attention on the carb and fuel system supply for sure , it needs to be spot on for the power adder this coming spring. As Shannon would say, it's just a small 50HP shot. Lol

It shouldn't need any more fuel for a simple little 50 shot......................;)

[98stangv6]

I snagged a Borg S366 and Treadstone had their intercoolers 40% off today!

[S281SC]

I snagged a Borg S366 and Treadstone had their intercoolers 40% off today!

What is that turbo going to be on?


Sent from my iPhone using Tapatalk

[draggin50]

Hopefully Santa brings me a new 26 spline, RXT clutch! Mine is trashed. Going to start tearing it apart this weekend.

[98stangv6]

What is that turbo going to be on?


Sent from my iPhone using Tapatalk

Just a stock bottom end 302 in my SN95.

[PKFIRE]

Gift cards= car parts cash.... directing money back towards the Cobra again.

[2Fast4You]

Maybe something aluminum, maybe... Lol

http://i1096.photobucket.com/albums/g338/way2fast4you2/Intercooler%20and%20piping%20package_zpsfbihrjpk.j pg (http://s1096.photobucket.com/user/way2fast4you2/media/Intercooler%20and%20piping%20package_zpsfbihrjpk.j pg.html)

Just a street car, just a street car I tell you...

[Maximus]

Maybe something aluminum, maybe... Lol

http://i1096.photobucket.com/albums/g338/way2fast4you2/Intercooler%20and%20piping%20package_zpsfbihrjpk.j pg (http://s1096.photobucket.com/user/way2fast4you2/media/Intercooler%20and%20piping%20package_zpsfbihrjpk.j pg.html)

Just a street car, just a street car I tell you...

I told you to do that years ago!:coo1:

[draggin50]

Best move you could make!!!!

[2Fast4You]

Thanks guys, work in progress for sure.

[redfirepearlgt]

Maybe something aluminum, maybe... Lol

http://i1096.photobucket.com/albums/g338/way2fast4you2/Intercooler%20and%20piping%20package_zpsfbihrjpk.j pg (http://s1096.photobucket.com/user/way2fast4you2/media/Intercooler%20and%20piping%20package_zpsfbihrjpk.j pg.html)

Just a street car, just a street car I tell you...

I'm proud of ya. Good choice.

[cstreu1026]

I’m hoping that my car will be driveable by Christmas. Weight on the aerospace brakes for the front along with the rotor hats and brackets for the rears that they didn’t get right when I ordered them.

[2-Tone]

Hopefully Santa brings me a new 26 spline, RXT clutch! Mine is trashed. Going to start tearing it apart this weekend.

Brian you may already know this but McLeod has a pretty great service dept with good deals on clutch rebuilds. You could upgrade that clutch to rxt1200 specs for about half what a new one runs.

[exrider416]

Since I decided to disappear from cars to buy a house and land, I'm hoping the elves in the spring bring me a fast car, definitely miss the track! If everything goes as it should, ill be out next year!

[redfirepearlgt]

trying to decide if the present my wife is to get me should be a henry 22 magnum, 67" race ramps for getting the car up in the air, or an Onkyo Home theater receiver......she doesn't know about the converter......................................... ..........until it arrives. Easier to ask forgiveness than permission. LOL!

[draggin50]

Brian you may already know this but McLeod has a pretty great service dept with good deals on clutch rebuilds. You could upgrade that clutch to rxt1200 specs for about half what a new one runs.

Thanks!!! Ill definitely look into that!

[98stangv6]

http://i108.photobucket.com/albums/n6/filluptheday/turbskeee_zpsp1naa7it.jpg (http://s108.photobucket.com/user/filluptheday/media/turbskeee_zpsp1naa7it.jpg.html)

[draggin50]

Nice!!!!

[Gearhead]

Bought a VMP TVS blower for my 04 Cobra I acquired a couple years ago. They had a 25% off deal that was only good on Black Friday for the first person that ordered a blower after 12 noon with a special discount code.....I got real lucky !!!

[2Fast4You]

Bought a VMP TVS blower for my 04 Cobra I acquired a couple years ago. They had a 25% off deal that was only good on Black Friday for the first person that ordered a blower after 12 noon with a special discount code.....I got real lucky !!!

Sweet, Congratulations!

[2Fast4You]

Who knows where to get the best deals on a new set of slicks, I'm wanting to look at Hoosier's 28 x 10.5 x 15 stiff sidewalls?

[S281SC]

Who knows where to get the best deals on a new set of slicks, I'm wanting to look at Hoosier's 28 x 10.5 x 15 stiff sidewalls?

I get mine from summit. They seem to be the same or better price than i have found other places. Plus free shipping and they get to me in one day.


Sent from my iPhone using Tapatalk

[redfirepearlgt]

Who knows where to get the best deals on a new set of slicks, I'm wanting to look at Hoosier's 28 x 10.5 x 15 stiff sidewalls?

Brian over at Finishline Performance has a very good connection. I bought my last MT rubber from McCormick Racing up in Michigan. A small mom/pop place I found on MT's website. 1800-999-DRAG is their number, however BRian stated he could save you a few bucks off that price as well though you would have to pay sales tax otherwise.

[draggin50]

Bought a VMP TVS blower for my 04 Cobra I acquired a couple years ago. They had a 25% off deal that was only good on Black Friday for the first person that ordered a blower after 12 noon with a special discount code.....I got real lucky !!!

Nice!!! Did you go with the GT500 TB also?

[89notch]

Freshen the motor
Bead locked weld rts
Custom cam
Valvetrain upgrades.
Loosen the converter some
Holley dominator ecu
Some new UPR suspension parts

[PKFIRE]

Bought a VMP TVS blower for my 04 Cobra I acquired a couple years ago. They had a 25% off deal that was only good on Black Friday for the first person that ordered a blower after 12 noon with a special discount code.....I got real lucky !!!

I missed out, I went for it also and the discount disappeared when I pressed purchase. I'll wait for the next one.

[gzbs197]

I have a basically new GT500 TB if your interested. It is complete with electronics. If you would be interested shoot me a PM and we can work something out.

[Walter]

Freshen the motor
Bead locked weld rts
Custom cam
Valvetrain upgrades.
Loosen the converter some
Holley dominator ecu
Some new UPR suspension parts

No coyote?

- - - Updated - - -

Less weight
Better suspension
driver mod
couple other top secret stuff....

[Gearhead]

Bought a VMP TVS blower for my 04 Cobra I acquired a couple years ago. They had a 25% off deal that was only good on Black Friday for the first person that ordered a blower after 12 noon with a special discount code.....I got real lucky !!!



Nice!!! Did you go with the GT500 TB also?

Went with an Accufab....

[draggin50]

Hopefully you get a good one! Mine stuck so bad, I put the stock one back on. The one on the orange Cobra works fine though.

They say the GT500 is the way to go. I know Ricky has that on his and it made right at 600 to the tire on 93. Hard to beat that!

[89notch]

No coyote?

- - - Updated - - -

Less weight
Better suspension
driver mod
couple other top secret stuff....

I decided to just keep it as is for next year

[PKFIRE]

Hopefully you get a good one! Mine stuck so bad, I put the stock one back on. The one on the orange Cobra works fine though.

They say the GT500 is the way to go. I know Ricky has that on his and it made right at 600 to the tire on 93. Hard to beat that!

He made that on a mustang dyno. I'm scared going to single blade again with all the high idle and sticking issues I had with the Dragon.

[draggin50]

Yeah the sticking is what made me frustrated. Very aggravating.

He made that on Adam's dyno. I think its a Mustang dyno.