90 Kenny Brown Outlaw LX

[devous1]

I haven't been on here for quite some time but I'm finally getting my LX together. Since a lot of the parts for the motor came from members of the site and the guys at Dayton Performance I thought I would let some people see what their parts are up to. Dayton Performance also assembled the 349, installed 4:10s and some other items.

Last fall I put her up on the lift, removed everything from the tranny back, blasted the under carriage with aluminum oxide then painted it with POR15 and Eastwood Ceramic Chassis Black. All parts were either replaced with new or stripped and recoated.

We put on some big ass Wilwoods 13" 4piston in back, 14" 6 pistons up front, I had shit fits getting the brakelines connected and clearing the wheels.

Wheels
TSW Nurburging in Bronze

Front
18 x 8.5

Rear
18 x 9.5

Tires I just picked up today
Pirelli P-Zero

Front
265/35-18

Rear
285/35-18

I finally have the car back on the ground today and the tires/wheels seem to be clearing so far. I also swapped out my old MAC exhaust for SLP Loudmouths for a little more clearance. These fuckers are loud.

I haven't uploaded any videos to my laptop to show but feel free to check it out on Facebook under https://www.facebook.com/search/top/?q=90%20kenny%20brown%20lx%20mustang

[redfirepearlgt]

Sure it looks great but I don't Facebook.

[devous1]

You should still be able to view it if you hit the link.

[Rick93coupe]

I love the big brakes and wheel/tire combo. Looks pretty kickass!

[draggin50]

Sounds nasty!

[2Fast4You]

Is that an aftermarket tank with the A1000 fuel pump set up?

[devous1]

It is, I bought it about a two years ago off a member. It's a Glenn's sleeper tank with their premium cover and stainless straps. The fuel pump setup was left over from my Mach1 build so I just reused it.

[NXcoupe]

Wow nice! You've been busy! I couldn't see the videos either but stop by some weekend.

[devous1]

Right now I'm having issues getting the brakes to bleed. I normally just use a vacuum system to bleed them out but it doesn't seem to be getting it done so I gotta get some one out here to pump them for me. Hopefully there are no more issues, I took it off the lift today and it wants to move.

I have a few jobs coming up in Dayton and Kettering but usually we try to get in and out as fast as we can but I'll try.