Looking for npt fitting

[SN95N/A]

4AN MALE X 1/16 NPT MALE (FORD FUEL RAIL FITTING)

Looking for this locally I'm around eastgate area didn't know what place would have this ..thanks for the help

[draggin50]

Best bet is have Jegs send ya one. They are pretty cheap. And have it quick.

And you sure its 1/16"? I thought they was 1/8".

http://www.jegs.com/i/Earls/361/981604/10002/-1

[SN95N/A]

Your prolly right Brian I'm not sure

[86gt40]

I had to use radius bushing to an... I have a ton of wrong ones in the garage. Wish I'd known yesterday, I would of sent every last one with that box.

[86gt40]

Nope, I lied, your talking about where the Schroeder valve is, I'm awake now, I got mine from Mike bell.

[SN95N/A]

Lol I'm awake now, I think Brian's rite I think it is 1/8 fitting wonder if Cincy speed would have that..anyone know of place out toward Williamsburg that fills bottles.I know a few but about 45min. Drives

Sent from my VS990 using Tapatalk

[draggin50]

I know I have one here somewhere but Id have to find it. And Im probably 40-45 minutes away or so now.

[SN95N/A]

Where u at now

Sent from my VS990 using Tapatalk

[draggin50]

Outside of Hillsboro.

[SN95N/A]

I found one at l&m atleastbhe said he had one..your 17 miles away lol

Sent from my VS990 using Tapatalk

[draggin50]

I thought I was farther than that.

Ill see if I can find mine in case he doesn't have one.

[Rick93coupe]

https://lmr.com/item/LRS-3280/Mechanical-Fuel-Pressure-Gauge-Adaptor

Would this work?

[SN95N/A]

It is 1/16th in. I bought 1/8 it was too big then looked it up online.

[SN95N/A]

Rick I need that fitting in 1/16 to 1/8th lol

[Rick93coupe]

If you have a parker store nearby, they probably have something to adapt it and carry Earls AN fittings.

[S281SC]

I just ordered that 1/16 npt to 4AN fitting from summit on monday and they had it to me today. It was like $19

https://m.summitracing.com/parts/nex-16179


Sent from my iPhone using Tapatalk

[draggin50]

It is 1/16th in. I bought 1/8 it was too big then looked it up online.

Damn... Now I feel like an ass. You know not to listen to me from now on!

[NXcoupe]

Mike I'm pretty sure I have one. Steve, you should call me before you order stuff, I have all kinds of stuff I'd like to clear out.

[SN95N/A]

Brian it's all good I'm new to the nitrous scene so I'm learning,l got the 1/16 to 3an fit perfect line went on there and I thought I was in business last night,then I get too the solenoid and the one side had 4an fitting where the line went on.are they all set up like this or did someone change that? I went to l&m and got the fitting for the solenoid and got the kit finished up last night.

[NXcoupe]

That's good. B8t a plate should have -4 supplying it unless you are keeping it a small shot

[SN95N/A]

Okay

Sent from my VS990 using Tapatalk

[SN95N/A]

150 shot

[NXcoupe]

Its gonna be marginal but it should work.

[SN95N/A]

I can hold off if you think it's issue and get 4

Sent from my VS990 using Tapatalk

[NXcoupe]

Nah. When u come to the shop I will look for a 1/16 to -4 for you.

[2-Tone]

Ohio hydraulic would have just about any fitting you want in steel. They are in Sharonville and they are open a half day tomorrow if I recall.