Best carburetor intake?

[Eighty85Oh]

Looking for an opinion on what would be the best intake for a 302 street car, mild build, possible nitrous plate kit later. Rpm air gap looks like the winner from my research, what are your thoughts or experience?


Sent from my iPhone using Tapatalk

[k062693w]

Victor Jr. ...

[1baddlx]

Rpm air gap for mild build,Victor jr for and big hp build..

[NXcoupe]

I've got one of each for sale and I'm in Dayton. Come check them out and I'll make you a deal. ^ what he said is correct.

[draggin50]

Im running the RPM Air Gap on my 302 with the 1087 cam and GT40X aluminum heads. I wouldn't be afraid of either one though. I ran a Victor Jr. on a stock bottom end with F cam and milled 70 Windsor heads and it went 12.45@106 with a 5 speed, 4.10 gear and exhaust in a full weight 90 LX.

[Rich]

I had an 88 coupe that went 11.90 @ 99 (on the brakes trying not to break out). It was a very simple combo: Stock 93 shortblock, Twisted Wedge heads, F-cam, longtubes, Holley 650 DP, T-5, 4.10, edelbrock rpm (non-air gap).

If it is going to be regularly street driven, go with a dual plane. The air-gap, rpm, or weiand stealth. For a track car, go with the vic jr.

[Eighty85Oh]

Trying to put together something streetable with some passes at track once in a while. Goal is mid-low 11 car on a 125 shot.
That is a pretty basic setup rich, that's really what I want, add nitrous.

Nxcoupe, are those new or used intakes?

Sent from my iPhone using Tapatalk

[NXcoupe]

Trying to put together something streetable with some passes at track once in a while. Goal is mid-low 11 car on a 125 shot.
That is a pretty basic setup rich, that's really what I want, add nitrous.

Nxcoupe, are those new or used intakes?

Sent from my iPhone using Tapatalk

Used, and I have a couple carb nitrous plate kits as well.

[Eighty85Oh]

Used, and I have a couple carb nitrous plate kits as well.

How much for the used intake?


Sent from my iPhone using Tapatalk

[NXcoupe]

I have two of them, stop over and take a look at the stuff. I will have to check and see what we want for them, and I'll let you know. It's worth your drive to check out all the parts we have for sale.

[2Fast4You]

Victor Jr. w/ the N02.

[Kenny]

I am running a rpm intake on my 347 with afr 165 heads and stage 2 camshaft. Would victor Jr help?
The falcon runs on the strip most of the time.