Dirty Dozen Challenge for 2016, who's coming out to play?

[NXcoupe]

I know I am. I also know a few other's who have come to the shop looking to get a little faster. I am going to have my car on the list come hell or high water. I want that #1 spot Tony! Don't get too comfortable! We need a crown or some symbol to pass from one person to the next who sits at #1, jmho. Let's start the smack!

[exrider416]

I'll be out in something! Eclipse is still here and just rolled a coupe into the garage!

[draggin50]

I'll be back out come spring in the Cobra. Hopefully with more power and less weight. Gonna up the boost some and add some spray and see where it goes from there.

On another thought, is there any stickers or anything going to be done for this year's?

[Yellow98Cobra]

Hope to be on the bottom of the list... doubt it though, There are a lot of fast cars on this board.

[USMCPONY]

Id like to be there. Hopefully with twice the power I had this year.

[2Fast4You]

I'm looking to step it up a bit, not sure about #1 but surely the top 5. The tare down and rebuild has already begun.
Once again, I propose a Pro Tree light with a N/T format?

[redfirepearlgt]

I'm pretty certain the white paint on the 2014 will pick up a 10th or two over the green paint. So looking forward to getting the most from the 2013 setup after its bolted on the 2014 A6 setup and retuned by VMP tuning. Got some other mods as well to help get power to the ground.

[cstreu1026]

I plan on not being in the bottom of the list.

[cyah92]

Well I need some good luck rubbed on me from somebody so I can get mine finally down the track to get on the list.

[exrider416]

I might have something v8 powered so you guys don't pick om the 4 cylinder.

[Rick93coupe]

I hamstrung myself last year trying to lean on pump gas. I picked up a crank trigger, LS coils and 2 knock sensors. I'm putting it on E85 and starting at 20#s of boost.

[Yellow98Cobra]

I plan on not being in the bottom of the list.

I won't be in the list then. Lol

[draggin50]

I might have something v8 powered so you guys don't pick om the 4 cylinder.

Haha That little 4 banger has been quicker than most of us on the list this year!!! That's a bad bitch!

[Blowpastyou]

........

[2-Tone]

Hope to have my junk back together by late spring or early summer. Whipple is going away. Just ordered the new turbo yesterday.

[draggin50]

Sounds like a good year of racing coming up!!!

[Yellow98Cobra]

Hope to have my junk back together by late spring or early summer. Whipple is going away. Just ordered the new turbo yesterday.

This should be very interesting. Beautiful car!

[kennebellcobra]

I'm taking the #1 spot NA:flipoff:

[2Fast4You]

I'm taking the #1 spot NA:flipoff:

Lol, go get it!

[kennebellcobra]

New engine just arrived!

http://i35.photobucket.com/albums/d183/kennebellcobra/Mobile%20Uploads/image_zpsbgnxjowb.jpeg

- - - Updated - - -

[Rick93coupe]

New engine just arrived!

http://i35.photobucket.com/albums/d183/kennebellcobra/Mobile%20Uploads/image_zpsbgnxjowb.jpeg

- - - Updated - - -

LMAO, your going to need a much bigger hood!

[cyah92]

Lol.

[NXcoupe]

Lol @ Shannon. That's a giant engine. lol.

[Yellow98Cobra]

You even hid the Nitrous on this motor. LOL

[Dtony]

My new short-block should be here in December.. Going to add some suspension parts, lighten it up some and look for around 1100 hp to the wheels. I see no reason why I can't run close to 8.50 next year. So it should be fun trying to hold onto the new spot. And like always, I will be driving it too and from the track..... with AC. I am definitely looking forward to trying to hold off the pack.

[2Fast4You]

This is getting intense already and it hasn't been but a few weeks, I like it!

[cstreu1026]

I have no idea what to expect out of mine. It will be an 11.5:1 short block with TFS-R heads, custom cams, ported Vic Jr. Novi 2000, giant headers, 3" exhaust, yada yada yada on E85. It should make every bit of 650 without breaking a sweat and the blower should support 800-825 to the wheels.

[Yellow98Cobra]

I have. I use what to expect out of mine. It will be an 11.5:1 short block with TFS-R heads, custom cams, ported Vic Jr. Novi 2000, giant headers, 3" exhaust, yada yada yada on E85. It should make every bit of 650 without breaking a sweat and the blower should support 800-825 to the wheels.

:drunk::chug:LOL

[draggin50]

I have no idea what to expect out of mine. It will be an 11.5:1 short block with TFS-R heads, custom cams, ported Vic Jr. Novi 2000, giant headers, 3" exhaust, yada yada yada on E85. It should make every bit of 650 without breaking a sweat and the blower should support 800-825 to the wheels.

Sounds like it should run real good!

[Yellow98Cobra]

Sounds like it should run real good!

It sounds like a wicked build. I was just messing with you Cam.

[cstreu1026]

It will be a 9 second car with an 11 second driver.

[draggin50]

That about what mine is now! Makes the power to run 9's but it just hasn't done it yet!

[cstreu1026]

The Kit I bought is fitted with a waste gate and manual boost controller, so the plan is to spin the blower to max impeller speed at 7,000 RPM and we will adjust the boost to me the my needs without windowing the block. If it lives I'll be be putting together a big bore stroker and possible a bigger blower ( YSI or Novi 2500).

[cstreu1026]

I guess if it doesn't live I'll still be doing the same.

[Gearhead]

My new short-block should be here in December.. Going to add some suspension parts, lighten it up some and look for around 1100 hp to the wheels.

:blink::blink::eek::eek:

[2Fast4You]

Ring and pinion has been changed, should pick up a couple tenths with just coming from a 3.27 to a 3.73 or even a 4.10 after that.
New addition as well to the ignition side to give me data logging and programming capabilities.
New rockers on order to replace the old bad ones for starters, then to install some Happy Juice (N20).

[exrider416]

Eclipse went 9.5s, so whatever I bring out next year will be faster!!

[2Fast4You]

My new short-block should be here in December.. Going to add some suspension parts, lighten it up some and look for around 1100 hp to the wheels. I see no reason why I can't run close to 8.50 next year. So it should be fun trying to hold onto the new spot. And like always, I will be driving it too and from the track..... with AC. I am definitely looking forward to trying to hold off the pack.

Someone or something sure has lit a fire under your butt, huh!

[2Fast4You]

Eclipse went 9.5s, so whatever I bring out next year will be faster!!

I can't wait to see!

[draggin50]

Sounds like a 10 second car may be the gate keeper! Gonna be a good year of racing!

[2Fast4You]

If not a 9-second car, time will tell.

[draggin50]

It would be nice to see the bottom be a 9 second car but I don't think we can get 12 cars that fast. Maybe half or a little more.

[NXcoupe]

I'm eager to get my car back to the garage and get started on it.

Dtony, what fuel system are you running?

[USMCPONY]

Make sure you guys bring out a box of tissues.

[cstreu1026]

Make sure you guys bring out a box of tissues.
If you don't get a cage in that thing its more than likely you'll be the one that needs the tissues. :cool1:

[USMCPONY]

If you don't get a cage in that thing its more than likely you'll be the one that needs the tissues. :cool1:

Probly. Especially if I don't run fast enough to need a cage lol.

[draggin50]

Probly. Especially if I don't run fast enough to need a cage lol.

You needed that this year!

[2Fast4You]

I guess if you can't get it down the track it doesn't matter how much power you make.

[Dtony]

I'm eager to get my car back to the garage and get started on it.

Dtony, what fuel system are you running?

Fore engineering with triple Walbro 465's.... stock fuel rails for now.

[USMCPONY]

I guess if you can't get it down the track it doesn't matter how much power you make.

That's what the built motor is for :bigthumb

[2Fast4You]

^^^Everyone is surely looking to step it up come the new spring.^^^

[draggin50]

Im gonna see what my junk will do but not much in the stepping up direction. Getting a 3.73 gear put in it now. Then Ill work on the suspension, get some bigger injectors and up the boost a little. Just looking for a 9 second street car with A/C!

[redfirepearlgt]

^^^ Like Brian I seek to optimize my current setup. Power management and transition to the ground are the goals for 2016. Hopefully the transition to an auto is part of the solve for this equation along with suspension mods.

[2Fast4You]

I still have work to do with my suspension, it will react differently with the steeper gear.

[Blowpastyou]

9's won't cut it:flipoff:

[2Fast4You]

9's won't cut it:flipoff:

Do tell.

[NXcoupe]

Fore engineering with triple Walbro 465's.... stock fuel rails for now.

Return style right? Stock fuel rails will support some serious power, like over 700 - 800. But aftermarket ones make returnless so much easier.

[NXcoupe]

Make sure you guys bring out a box of tissues.

lol. And so it begins......

[Blowpastyou]

Actions speak louder than words!

[draggin50]

Actions speak louder than words!

You gonna be bringing out a Pro Mod?

[Blowpastyou]

No trailer required. Heat, touch screen, opulent luxury.

[redfirepearlgt]

OPULENT??? HOITY TOITY!! LOL! Had to look that one up on google to know what it meant.

[Blowpastyou]

And it WILL fist the DD... Man... I can tell it's winter... hahaha

[Dtony]

Return style right? Stock fuel rails will support some serious power, like over 700 - 800. But aftermarket ones make returnless so much easier.

Yes, return style. My car made close to 860 to the wheels ( and climbing.... had to let off) on a Mustang dyno. They system is supposed to support 1100 with stock fuels rails, 1400 with aftermarket. With this winters changes I am changing to aftermarket.

[S281SC]

I am looking at some more subtle changes than some of you all are. Larger tires, better clutch, e85. But hoping to see some decent improvements in et. Definitely excited for some more list racing.

[2Fast4You]

I'm looking at converting my existing 950HP carb to E85, any input on who's kit to go with, best bang for the buck?
I was looking at E85carbs.com?

[NXcoupe]

I read a lot on yellowbullet about this subject. Two or three guys that everyone fights over who is the best. that's one of the places they were talking about. Go over there and search for E85 carb, you'll get a ton of info, then share it here.

[2-Tone]

I'm looking at converting my existing 950HP carb to E85, any input on who's kit to go with, best bang for the buck?
I was looking at E85carbs.com?

Mark Sullen is the name I have heard several times. No personal experience, but the guy seems pretty sharp.

[2Fast4You]

Yeah, I checked his info online as well.

[Rick93coupe]

Sullens really is the E85 carb guy. Actually not just in carbs, general E85 fuel info.

[beefcake]

maybe we will
https://www.instagram.com/p/BAYcofwDPjD/?taken-by=teambeefcakeracing

[Maximus]

maybe we will
https://www.instagram.com/p/BAYcofwDPjD/?taken-by=teambeefcakeracing

7.10's? Daaang! Thats going to be crazy watching that drive all around the I-275 loop and then make back to back to back runs at TS! Good luck Brother!!:cool1:

[redfirepearlgt]

7.10's? Daaang! Thats going to be crazy watching that drive all around the I-275 loop and then make back to back to back runs at TS! Good luck Brother!!:cool1:

In route refueling? LOL! (like inflight refueling for those not of the military mindset).

[beefcake]

lol, with a 2 gallon fuel cell, that won't be happening.

but, hopefully we could bring out an 8 second 4000lb irs car on 17s........

[Maximus]

Oh shit! I thought we were talking Street cars. NM.:o

[redfirepearlgt]

OH OH speghettios...

[beefcake]

I'm taking the #1 spot NA:flipoff:

get in line.........


It will be a 9 second car with an 11 second driver.

:)


My new short-block should be here in December.. Going to add some suspension parts, lighten it up some and look for around 1100 hp to the wheels. I see no reason why I can't run close to 8.50 next year. So it should be fun trying to hold onto the new spot. And like always, I will be driving it too and from the track..... with AC. I am definitely looking forward to trying to hold off the pack.

where are you trying to come in on the scales?

with just under that we hit 8.7s at sea level air, but that was 3900lbs, weight reduction will help alot at that power level. in modified trim we were down to 3400 with me and hit 8.1's, at -1000 da.

a custom / larger air to air intercooler will be your friend at that power level. heat will generate pretty quick on the oem. we were hitting over 200 once we jumped to that kind of power level

6r80 i believe can go 7's, in a light enough combo.

i think the yellow 15 is around 3900 right now, and just shy of 1000. but the ported gt350 heads and cams should spark it up close to 1100.

the blue 11 though should make juuuuussstttt a little more. trick is getting it down e20 and stopping with the big blower on it. i am hoping for 7.50-7.6 in renedage trime, and would love to see some sub 7.2s with the xi on it

[1baddlx]

get in line.........



:)



where are you trying to come in on the scales?

with just under that we hit 8.7s at sea level air, but that was 3900lbs, weight reduction will help alot at that power level. in modified trim we were down to 3400 with me and hit 8.1's, at -1000 da.

a custom / larger air to air intercooler will be your friend at that power level. heat will generate pretty quick on the oem. we were hitting over 200 once we jumped to that kind of power level

6r80 i believe can go 7's, in a light enough combo.

i think the yellow 15 is around 3900 right now, and just shy of 1000. but the ported gt350 heads and cams should spark it up close to 1100.

the blue 11 though should make juuuuussstttt a little more. trick is getting it down e20 and stopping with the big blower on it. i am hoping for 7.50-7.6 in renedage trime, and would love to see some sub 7.2s with the xi on it

If anyone is capable of doing it,you'll be the one to achieve the highest level possible!

[Dtony]

get in line.........



:)



where are you trying to come in on the scales?

with just under that we hit 8.7s at sea level air, but that was 3900lbs, weight reduction will help alot at that power level. in modified trim we were down to 3400 with me and hit 8.1's, at -1000 da.

a custom / larger air to air intercooler will be your friend at that power level. heat will generate pretty quick on the oem. we were hitting over 200 once we jumped to that kind of power level

6r80 i believe can go 7's, in a light enough combo.

i think the yellow 15 is around 3900 right now, and just shy of 1000. but the ported gt350 heads and cams should spark it up close to 1100.

the blue 11 though should make juuuuussstttt a little more. trick is getting it down e20 and stopping with the big blower on it. i am hoping for 7.50-7.6 in renedage trime, and would love to see some sub 7.2s with the xi on it

Thanks for some info.... I was wondering about the intercooler. My car is right at 3814 with me now. I would like to get it to 3500 with me, but don't want to take anything away from it's driver status. I think I can get close to 8.50's, after that there's no point anyhow due to the cage cert.

I can't wait to watch the blue car run. It should be insane once you get it all sorted out.

[2Fast4You]

I'm eager to see everyone kick butt this year!
This is the 513 & 614 & 937 & 859 & 812 and so on and so on! Lol

[draggin50]

I need to get my head out of my ass and get mine done. Gear is in, but I still need to get the lower pulley on, injectors ordered and installed, and back on the dyno.

Then Im sure I will need a better cage... Where does it end?

[2Fast4You]

The 9.90's are waiting for you Brian, they won't go anywhere!

[draggin50]

Yeah I guess that's one way of looking at it! The sooner the better though!!

[USMCPONY]

I don't think they'll bitch about going .2 faster than your cage is certified. At least you have one lol.

[draggin50]

I just hate to deal with it. Id rather be safe up front. Most of the time, its another racer that bitches about it that gets you looked at.

[Dtony]

Good luck on the roll bar if you get into the 9s. Every time I ran my Mustang there I was kicked out until I got the 8.50 cert cage. It's the only reason I did it. Had the same problem at KK as well.

[draggin50]

Good luck on the roll bar if you get into the 9s. Every time I ran my Mustang there I was kicked out until I got the 8.50 cert cage. It's the only reason I did it. Had the same problem at KK as well.

Thanks Tony! That's what I was wondering. I hate to do it but I might have to.

[USMCPONY]

It's weird that they pick and choose who their going bitch at. I've seen guys run 8's with no cage or roll bar.

[Rick93coupe]

Edgewater bitched at me for no roll bar padding, keep that in mind too.

[draggin50]

I got the same thing for that Rick. No roll bar padding and I had to stay under 11.50's.

First pass was a 10.80 I think and they didn't say to slow down so I didn't.

[exrider416]

I got bitched at for no cage as well after I went back to back 9.7s in the eclipse early in the year. Went back with the new motor and they got on me for no roll padding in tech. Went 9.7 then a 9.57 and never heard anything that day, but I loaded it up and didn't push my luck any more. The next weekend they asked for NHRA license and got on me for my cage, limited me to 6.5s in the 1/8 and 10.0s in the 1/4 that day.

[draggin50]

License... Now there is another thing I need to get if it picks up much. Where does it end?

[USMCPONY]

I'm just going to build mine as fast as I can. If I go to the track I'll probably go to clay city or Thornhill. They don't have cage restrictions. I hear Tristate is pretty laid back. Plus my buddy just bought Vengeance racing's 1500rwhp twin turbo z06. With recent mods it made 1780rwhp. We've been talking about doing the 1/2 mile events. They don't have cage restrictions like the drag strips.

http://www.corvetteforum.com/forums/c6-forced-induction-nitrous/3550654-vr-just-another-1100rwhp-tt-c6z-on-pump-gas.html

[cstreu1026]

They all have cage requirements but whether or not they choose to enforcement is something entirely different.

[draggin50]

With all the crashes lately, Id rather be safe. I can think of a few right off that wouldn't be here without a cage.

[Maximus]

All this HP & $$$$$ you guys are adding/spending and you are NOT putting in a cage?? Thats just stupid. Let me know how that works out for ya when you lose traction and go head first into the wall and barrel roll down the strip. :rolleyes:

Case in point....
https://www.youtube.com/watch?v=r7STt_6I5Dw

[Maximus]

With all the crashes lately, Id rather be safe. I can think of a few right off that wouldn't be here without a cage.

I sure was glad I had a cage and other safety equipment when I hit the wall at E20 years ago. Rang my bell, but I walked away.

[cstreu1026]

All this HP & $$$$$ you guys are adding/spending and you are NOT putting in a cage?? Thats just stupid. Let me know how that works out for ya when you lose traction and go head first into the wall and barrel roll down the strip. :rolleyes:

Case in point....
https://www.youtube.com/watch?v=r7STt_6I5Dw

Amen. I never can figure out why people are so resistant purchasing the required safety equipment but will spending huge sums to make more and more power.

[beefcake]

Thanks for some info.... I was wondering about the intercooler. My car is right at 3814 with me now. I would like to get it to 3500 with me, but don't want to take anything away from it's driver status. I think I can get close to 8.50's, after that there's no point anyhow due to the cage cert.

I can't wait to watch the blue car run. It should be insane once you get it all sorted out.

yes, you'll def start getting some heat at that power level.

me too, we got the holley sorted out this weekend, 23 hours to get all 8 cylinders going,

turns out holley had the cylinders marked wrong on the plug and play harness.. so much for plug and play lol


I'm eager to see everyone kick butt this year!
This is the 513 & 614 & 937 & 859 & 812 and so on and so on! Lol

we need to call up them okc boys and get something going

[2Fast4You]

we need to call up them okc boys and get something going[/QUOTE]

I'm good with that! Lol

[USMCPONY]

I sure was glad I had a cage and other safety equipment when I hit the wall at E20 years ago. Rang my bell, but I walked away.

I have no problem putting a 6 point in. I just dont want to rip apart my dash. That's why I've been rethinking the drag racing thing.

[NXcoupe]

we need to call up them okc boys and get something going

I'm good with that! Lol[/QUOTE]

From the impression I got from them when I was out there talking to the guys, I'd say if a few of us rolled out there, we'd get some races. I think that would be on my top ten bucket list. Even tho I don't like street racing, I'd have to put that aside for an evening. lol.

Update: My black coupe is out of storage and at the shop!

[Rick93coupe]

I'm calling out the crowmod, go big or go home right?

[draggin50]

I'm good with that! Lol

From the impression I got from them when I was out there talking to the guys, I'd say if a few of us rolled out there, we'd get some races. I think that would be on my top ten bucket list. Even tho I don't like street racing, I'd have to put that aside for an evening. lol.

Update: My black coupe is out of storage and at the shop![/QUOTE]

Im in! I already told the wife we are heading out when the weather clears! Ill take on the dung beetle!

[Dtony]

I would love to race the loudmouth Chuck. He never beats anyone, so I may have a chance. LOL.

[redfirepearlgt]

I would love to race the loudmouth Chuck. He never beats anyone, so I may have a chance. LOL.

I couldn't get mine past dung beetle. But I'd come watch the show!

[draggin50]

I couldn't get mine past dung beetle. But I'd come watch the show!

You get Dung Beetle and Ill try out the farm truck!

Better yet, Ill take on the mobility scooter! I might have a chance there!

[USMCPONY]

Chuck is supposedly going to a big tire. I can't stand his ass either.

[NXcoupe]

not supposedly, he is. He showed me pics of it all cut up with the giant meats on the back. He's actually a really cool guy in person. Just don't disrespect him or fuck with him and you're fine. lol.

[draggin50]

Yeah I like Chuck. He don't take shit from anyone and says what he thinks.

[2Fast4You]

How is everyone doing for this coming race season? Let's see and hear some updates on what we can look forward too this year!

[NXcoupe]

Well, heads are ported, valve job done. Now I need to assemble them and put them on the shortblock and start putting the turbo kit together on it. Then build the one for the other blue and orange car with the blower.

[Maximus]

How is everyone doing for this coming race season? Let's see and hear some updates on what we can look forward too this year!

Actually I started working on mine last night...
http://i775.photobucket.com/albums/yy39/CincySpeed/12687800_472049063004028_968827764064275411_n_zps7 pkdw0uv.jpg (http://s775.photobucket.com/user/CincySpeed/media/12687800_472049063004028_968827764064275411_n_zps7 pkdw0uv.jpg.html)

Although my daughter put my exhaust manifold on backwards.;)

[redfirepearlgt]

^ Coyote Swap!!!

[redfirepearlgt]

How is everyone doing for this coming race season? Let's see and hear some updates on what we can look forward too this year!

Things are moving forward.........oh and lots of white.

[2Fast4You]

I've done a gear swap and added an ignition controller, should give me some tune ability.

[2-Tone]

The vert is on a diet. Stripped it down to a shell in December. Starting to put it back together. Rear end is in, front suspension is together and I finished brakes and steering last weekend. Started roll bar to 8.50 cage conversion this afternoon. Hope to be working out the bugs out this summer. New combo is turbo 5.4 with a th400.

[draggin50]

And Im over here happy that I got the 3.73 gear done!

Although I have got a lot done on the Model A.

[Dtony]

My new sleeved short block finally and get ally arrived. My Cobrajet Exhaust cams are here, just got to assembled and on the rollers. I am going to see where it's at, but I may do a little something extra once I see the final numbers. I am looking for just enough to stay in the 8s on the worst DA day, then let it eat in cool weather.

[Kwik92GT]

Actually I started working on mine last night...
http://i775.photobucket.com/albums/yy39/CincySpeed/12687800_472049063004028_968827764064275411_n_zps7 pkdw0uv.jpg (http://s775.photobucket.com/user/CincySpeed/media/12687800_472049063004028_968827764064275411_n_zps7 pkdw0uv.jpg.html)

Although my daughter put my exhaust manifold on backwards.;)

Hate when that happens but I'm sure you'll work it out. :D

What size "muffler" you going to run?

[draggin50]

Actually I started working on mine last night...
http://i775.photobucket.com/albums/yy39/CincySpeed/12687800_472049063004028_968827764064275411_n_zps7 pkdw0uv.jpg (http://s775.photobucket.com/user/CincySpeed/media/12687800_472049063004028_968827764064275411_n_zps7 pkdw0uv.jpg.html)

Although my daughter put my exhaust manifold on backwards.;)

Cant wait to see more of this one!

[redfirepearlgt]

^^^ SO RACE CAR OR STREET CAR??? BROO HA-HA-HA-HA-HA!!!!!

[2Fast4You]

That's his Street Race Car!

[Rick93coupe]

Actually I started working on mine last night...

Although my daughter put my exhaust manifold on backwards.;)

I'm really looking forward to seeing this one!

[Maximus]

Hate when that happens but I'm sure you'll work it out. :D
What size "muffler" you going to run?

Two "lil 300 series, BW, mufflers. :)


Cant wait to see more of this one!

Thanks! Hopefully Ill have it out this Spring.


^^^ SO RACE CAR OR STREET CAR??? BROO HA-HA-HA-HA-HA!!!!!

I will never own another Race Car! This current combination will be on E85 and 93 for the street.


I'm really looking forward to seeing this one!

Thanks! Im looking forward to actually having something worth bringing out and just hanging out again. Its fun when you have a few bad ass streetcars running around together. ie, Running of the Pony's. :D

Sneak peak....not really sneaky as my PB account is not private. LoL!!
http://i775.photobucket.com/albums/yy39/CincySpeed/Chevy%20II/a_zpsvyio2cs6.jpg (http://s775.photobucket.com/user/CincySpeed/media/Chevy%20II/a_zpsvyio2cs6.jpg.html)

[2Fast4You]

Looking good Craig, looking real good!

[redfirepearlgt]

Looks real nice in there Craig. Glad to hear it will be truly streetable. Still think a coyote swap would have been an interesting twist, HA!

[draggin50]

Damn that looks good Craig!

[Kwik92GT]

Badass! :bigthumb

[Blowpastyou]

I can't wait for summer. I think I'm going to like my street car alot more than my racecar. Especially if it runs 4's...:evilflip:

[USMCPONY]

I can't wait for summer. I think I'm going to like my street car alot more than my racecar. Especially if it runs 4's...:evilflip:

Let's hear some detail on this thing

[draggin50]

Street cars are where its at. With all the local heads up racing slowly going away, you can still get out and enjoy it more often than 1 weekend a month.

Any word on the FNL racing?

[Blowpastyou]

Haven't heard much about fnl. No details are being leaked about the new car. It is a beater and it's name is tetanus. That's about it.

[Maximus]

Looking good Craig, looking real good!


Looks real nice in there Craig. Glad to hear it will be truly streetable. Still think a coyote swap would have been an interesting twist, HA!


Damn that looks good Craig!


Badass! :bigthumb

Thanks!!:)

No Coyote Swap in the Nova Chad.


Street cars are where its at. With all the local heads up racing slowly going away, you can still get out and enjoy it more often than 1 weekend a month.

Exactly! I dont plan on ever owning another racecar.

[Blowpastyou]

That car is nasty craig! One of my favorite body styles.

[Maximus]

That car is nasty craig! One of my favorite body styles.

Thanks! Id ask you about yours, but its a secret?? Wassup with that??? :(

[Blowpastyou]

Just being quiet, bringing out thrown together junk, seeing where it goes.

[chad393na]

After splitting my block in half at the end of last season, I decided to go back to my windsor roots. Haven't got the combo totally figured out, but it should run a little faster than last years setup;)

[NXcoupe]

After splitting my block in half at the end of last season, I decided to go back to my windsor roots. Haven't got the combo totally figured out, but it should run a little faster than last years setup;)

If it doesn't, full coverage and match comes to mind......

[chad393na]

Yes it does!

[exrider416]

Looking like I might be out in a Ford that is Ford powered. Anyone in need of a fresh LS 5.3? lol

[2Fast4You]

Good deal on the Ford!

[redfirepearlgt]

Looking like I might be out in a Ford that is Ford powered. Anyone in need of a fresh LS 5.3? lol

I was confident you'd finally come to your senses...

[cyah92]

Lol

[Dtony]

I was confident you'd finally come to your senses...

I talk to him all the time about that. LOL.

Seems like he's back on the right track.

[Walter]

Street cars FTW!

[redfirepearlgt]

I talk to him all the time about that. LOL.

Seems like he's back on the right track.

Hallalujah Brother and pass the peas!

[exrider416]

Hahaha. Well we will see what surfaces this year! Nothing set in stone yet lol

[redfirepearlgt]

Now don't go backslidin' after Deacon Dtony did all that preachin' and got your mind right again in accordance to the 10 commandments of Rev. Vinny5.0 :angel:

[Blowpastyou]

Who will be the fastest this year? Predicted times? Any pre season call outs? Let's get some excitement up in herrr.

[2Fast4You]

I won't be the fastest but I surely won't be the slowest.

[Kwik92GT]

Who will be the fastest this year? Predicted times? Any pre season call outs? Let's get some excitement up in herrr.

Says the guy with all the secret squirrel stuff going on. ;)

[2Fast4You]

Who will be the fastest this year? Predicted times? Any pre season call outs? Let's get some excitement up in herrr.

Well, then start it off without all the secret stuff up in herrr!

[Maximus]

Who will be the fastest this year? Predicted times? Any pre season call outs? Let's get some excitement up in herrr.

My current certification on my cage, limits me to 8.50s. :(

[2Fast4You]

As I stated last season, this should be a .500 ProTree and N/T heads up race.

[draggin50]

Pro tree is .400

[Kwik92GT]

Pro tree is .400

You can do a .500 as well. I think some of the comp classes in the NMRA did this.

[Blowpastyou]

Not much to hide. Bunch of thrown together junk, all old stuff no one else wanted. It's very ugly.

[Kwik92GT]

Not much to hide. Bunch of thrown together junk, all old stuff no one else wanted. It's very ugly.

Ugh huh, riiiiight. :gotpics:

[2Fast4You]

We can do a.400 Protree, doesn't hurt my feelings just as long as we do a Protree, N/T set up.

[beefcake]

.4

[NXcoupe]

Well, I just know I want on the list again. Not sure how fast I'll be or which car I will be in, but it's going to be something soon. I prefer a heads up .400 pro tree when racing for as spot, but it all depends on what is negotiated for the race terms.

[blown96cobra]

I made a few changes, different boost controller with co2 , new ptc converter that dusty Bradford specd for my combination and I'm gna hit the rollers again and try for some more power....hoping I can run a 9.20 or better. The car has already trapped 142mph @ e20 with a boost leak so I'm hoping for high 140s low 150s with everything squared away.

[NXcoupe]

Who is gonna be the first two to play?

[Maximus]

Hopefully, Ill be out in a couple months. At least its back on the ground.:)

http://i775.photobucket.com/albums/yy39/CincySpeed/Chevy%20II/aaa_zpsgwhpvpnp.jpg (http://s775.photobucket.com/user/CincySpeed/media/Chevy%20II/aaa_zpsgwhpvpnp.jpg.html)

[cyah92]

Nice car.

[Eighty85Oh]

That thing is sweet!!!


Sent from my iPhone using Tapatalk

[Kwik92GT]

:drool:

[draggin50]

Going to be some quick cars out this year it looks like!

[2Fast4You]

I'm hoping to be in the Top 10 Brian, that should put you in the Top 9 then. Lol

[draggin50]

They don't make a list long enough for me to be on it! Maybe a top 20! I just have a slow heavy street car with AC!

[SN95N/A]

Lol you all funny

[cyah92]

I agree you all funny.

[draggin50]

No, You all funny!

[NXcoupe]

I know i want to get something together and out asap.

[redfirepearlgt]

Maybe I can run well enough just be in the bakerz dozen spot... LOL! Looks like there's gonna be some fast cars interested in this list for 2016.

[Blowpastyou]

http://i211.photobucket.com/albums/bb78/blowpastyou/Mobile%20Uploads/20151122_103306_zpsu2rz17cb.jpg (http://s211.photobucket.com/user/blowpastyou/media/Mobile%20Uploads/20151122_103306_zpsu2rz17cb.jpg.html)
Uh oh... still waiting on a few things, then I'll be ready

[Kwik92GT]

http://i211.photobucket.com/albums/bb78/blowpastyou/Mobile%20Uploads/20151122_103306_zpsu2rz17cb.jpg (http://s211.photobucket.com/user/blowpastyou/media/Mobile%20Uploads/20151122_103306_zpsu2rz17cb.jpg.html)
Uh oh... still waiting on a few things, then I'll be ready

Waiting on what? Looks ready to me! :yup:

[Blowpastyou]

Prochamber, dumps, fms driveshaft. Also need a pedestal sh8m kit for the rockers

[86gt40]

Prochamber, dumps, fms driveshaft. Also need a pedestal sh8m kit for the rockers

I've got pedistal shim kit if u like

[Blowpastyou]

Thanks, but I already have a set coming from Jesel ;)

[draggin50]

Jesel on a stock motor??? I smell something fishy!!!

Was that Brad Emery's car from Florida? The glazed donut is what he called it.

[Blowpastyou]

Yes. With a few small changes

[redfirepearlgt]

Grudge car maybe? Not like the structure...

[Blowpastyou]

Huh...

[2Fast4You]

More there than meets the eye!

[Maximus]

Nice car.

That thing is sweet!!!

:drool:

THANKS! :)