89 Coupe project

[draggin50]

Im tossing around the idea of selling the coupe. Thinking about finishing the Model A before I start on another Mustang.

It is an 89 from Canada. I still have the original cluster in KPH that will go with it. The body is complete except for the hood. I have the front and rear glass but the front is cracked. I still haven't finished under the hood but I have a quart of paint that will go with it. Body is clean with no rust and not wrecked up front. Frame rails are perfect. I do have some gray interior for it but not all of it. Still need quarter plastics, door panels, headliner, and dash. The blue door panels are in it still. It has a steering column from a 91 in it. Very nice mini tub job and cage. has 1 Kirkey seat but no cover.

Front suspension is PA Racing K member and A arms, Strange struts with coil overs, caster/camber plates, Flaming river rack and shaft. Also has Wilwood brakes. New alumastars with DS-2 tires.

Rear consists of a Gary Rohe built 8.8. Axle tubes was removed and it has CM tubes installed with 9 inch ends. All TRZ control arm mounts with TRZ upper and lowers. Also the biggest TRZ anti roll bar goes with it along with the PST driveshaft. It has a 4.10 lightened gear lightened spool with 35 spline gun drilled axles and 1350 pinion yoke. Has been 1.04 60ft in the Bomber. No brakes or wheels for the rear.

$5500 firm. Clean and clear title.

http://i661.photobucket.com/albums/uu339/draggin50/89%20Coupe/IMG_20150913_243846770_zpsfqu8c3kw.jpg (http://s661.photobucket.com/user/draggin50/media/89%20Coupe/IMG_20150913_243846770_zpsfqu8c3kw.jpg.html)
http://i661.photobucket.com/albums/uu339/draggin50/89%20Coupe/IMG_20150913_242202832_zpsai1ifswx.jpg (http://s661.photobucket.com/user/draggin50/media/89%20Coupe/IMG_20150913_242202832_zpsai1ifswx.jpg.html)
http://i661.photobucket.com/albums/uu339/draggin50/89%20Coupe/IMG_20150726_235917869_zpss5bkaef7.jpg (http://s661.photobucket.com/user/draggin50/media/89%20Coupe/IMG_20150726_235917869_zpss5bkaef7.jpg.html)
http://i661.photobucket.com/albums/uu339/draggin50/89%20Coupe/IMG_20150726_194552454_zpsl1avktcx.jpg (http://s661.photobucket.com/user/draggin50/media/89%20Coupe/IMG_20150726_194552454_zpsl1avktcx.jpg.html)
http://i661.photobucket.com/albums/uu339/draggin50/89%20Coupe/IMG_20150726_194542723_zpsztmyty02.jpg (http://s661.photobucket.com/user/draggin50/media/89%20Coupe/IMG_20150726_194542723_zpsztmyty02.jpg.html)
http://i661.photobucket.com/albums/uu339/draggin50/89%20Coupe/IMG_20150705_193249190_zpsyyhrhsr4.jpg (http://s661.photobucket.com/user/draggin50/media/89%20Coupe/IMG_20150705_193249190_zpsyyhrhsr4.jpg.html)
http://i661.photobucket.com/albums/uu339/draggin50/89%20Coupe/IMG_20150704_235254953_zpsffqbwryz.jpg (http://s661.photobucket.com/user/draggin50/media/89%20Coupe/IMG_20150704_235254953_zpsffqbwryz.jpg.html)
http://i661.photobucket.com/albums/uu339/draggin50/89%20Coupe/IMG_20150704_175732565_zps8mqgnrsu.jpg (http://s661.photobucket.com/user/draggin50/media/89%20Coupe/IMG_20150704_175732565_zps8mqgnrsu.jpg.html)

[TooFast98Cobra]

Love blue notches!

[2Fast4You]

That didn't take long! Lol

[draggin50]

Im out of room with the Model A sitting here and Id like to see it done. Ill have a shit ton in powder coating coming up. And a bunch of other stuff needed for it.

[86gt40]

It might be time to sell my 92

[Goober]

If it only wasn't caged and tubbed. Wife shot it down without even seeing a pic

[Yellow98Cobra]

I would be interested but I am sure my big ass wouldn't fit in it with the cage.

[chrisb1961]

Where were you when I sold the gt??? Got a perfect engine for it and all

[draggin50]

I hate to even get rid of it but I'm out of room and I want to get the old truck done soon. It would make someone a bad ass car.

[Goober]

No doubt! I'd hate to buy it and cut the cage out but that's not what I'm looking for. Still a killer price for what all is done.

[Goober]

And WAY more rear end than I'll ever think about using [emoji23]

[draggin50]

Ill part it if there are any needs. I could probably make more money like that anyways really.

[Goober]

If it gets down to a stock suspension roller I could probably convince her to let me has it. Right now it's a coupe or go buy something with a loan.


Sent from my iPhone using Tap tap tapa-roo

[2-Tone]

Shoot me a price on the rear end, driveshaft, and ARB if you decide to part it.

[draggin50]

PM sent Tommy.

[TooFast98Cobra]

I'll give you $700 for.the front wheels and tires if they are in good shape .

[draggin50]

The tires and wheels are brand new. Id have to get $800 though. They was over $1300 new.

[TooFast98Cobra]

I understand . Let.me think about it . Will u throw in lugs ?

[k062693w]

How Much for the Jackstands ???

[draggin50]

Those jack stands are the new high tech units! I don't think you have anything that could use these! They only work on cars that will never run!

[k062693w]

Those jack stands are the new high tech units! I don't think you have anything that could use these! They only work on cars that will never run!

Well then they're Perfect for Me ... I'm the Master of that !!! :lol:


Good Luck with the Sale ... It's a Beautiful, Well Done Car !!!

[Jrcmutang]

pm'ed you

[TurboNG]

What point cage?

[TurboNG]

What's the cage details

[draggin50]

It's a mild steel cage that isn't certified yet. It would go to 8.50 the way it is. Still needs a few floor bars I think to be 25.x. It's a 10 point with funny car.

[draggin50]

Sold!