full force
04-15-2015, 07:03 AM
I have some transmission parts here....
T56 has 26 spline input shaft upgrade, nice shifter not sure brand, no bell, just gone over by a buddy that does transmissions to make sure its good to go...1600.00 pick up 44138 Ohio or 1675.00 plus ship
Another T-56 no bell with new 5th gear set, all else checks out good, includes MGW shifter 1800.00 pick up 44138 Ohio or 1875.00 plus ship
T-56 bell housing 250.00 plus ship
Tremec 3550/TKO 5.0/5.8 blowproof bell housing 275.00 plus ship
10.5" 10 spline Centerforce dual friction clutch less then 100 miles 275.00 plus ship
Dynotech Aluminum driveshaft for T-56 300.00 plus shipp
8 bolt 4.6 billet flywheel 200.00 plus ship....
more parts here also... text for pics and more parts 440-476-4114
I have some transmission parts here....
T56 has 26 spline input shaft upgrade, nice shifter not sure brand, no bell, just gone over by a buddy that does transmissions to make sure its good to go...1600.00 pick up 44138 Ohio or 1675.00 plus ship
Another T-56 no bell with new 5th gear set, all else checks out good, includes MGW shifter 1800.00 pick up 44138 Ohio or 1875.00 plus ship
T-56 bell housing 250.00 plus ship
Tremec 3550/TKO 5.0/5.8 blowproof bell housing 275.00 plus ship
10.5" 10 spline Centerforce dual friction clutch less then 100 miles 275.00 plus ship
Dynotech Aluminum driveshaft for T-56 300.00 plus shipp
8 bolt 4.6 billet flywheel 200.00 plus ship....
more parts here also... text for pics and more parts 440-476-4114
Also bought a 96 Cobra with lots of parts.....
has a 393 Windsor with Scat crank, and H beam rods, Ross XL400 pistons, Moroso sump oil pan, Trick Flow heads not sure what model head yet, Comp Cams cam, roller, 236/242 duration @.050 and .555/.576 ground on a 110, retrofit roller lifters according to paperwork, not sure rockers but roller (plan to yank a valve cover and see) Trick flow upper and lower intake with Holley Throttle body and spacer, 44lb injectors, has a 36MM mass air on it needs tuned but car runs good the way it is...
Has a 03-04 Cobra T56 in it, 10 spline Centerforce clutch and shifter, aluminum driveshaft, built 8.8 with gear axles and diff cover ( I need to verify what still) Complete Aeromotive A1000 fuel system, sump gas tank, upper and lower control arms, lowering springs, Tokico white adj., bigger sway bars, battery in trunk, MSD ignition, all A/c parts there, gauges in car some not hooked up..Chrome Cobra wheels.... Fluidyne radiator, Cowl hood, MANY parts here....
6 speed with bell for 5.0 and shifter 1800.00
driveshaft 300.00
many other parts.... ASK.... or text me
engine can be ran and heard for now, if local.... also can be bought many different ways, with or without intake, and so on....
I will add prices or text me for fast response 440-476-4114 big stuff pick up only, will ship most of it.....
T56 has 26 spline input shaft upgrade, nice shifter not sure brand, no bell, just gone over by a buddy that does transmissions to make sure its good to go...1600.00 pick up 44138 Ohio or 1675.00 plus ship
Another T-56 no bell with new 5th gear set, all else checks out good, includes MGW shifter 1800.00 pick up 44138 Ohio or 1875.00 plus ship
T-56 bell housing 250.00 plus ship
Tremec 3550/TKO 5.0/5.8 blowproof bell housing 275.00 plus ship
10.5" 10 spline Centerforce dual friction clutch less then 100 miles 275.00 plus ship
Dynotech Aluminum driveshaft for T-56 300.00 plus shipp
8 bolt 4.6 billet flywheel 200.00 plus ship....
more parts here also... text for pics and more parts 440-476-4114
I have some transmission parts here....
T56 has 26 spline input shaft upgrade, nice shifter not sure brand, no bell, just gone over by a buddy that does transmissions to make sure its good to go...1600.00 pick up 44138 Ohio or 1675.00 plus ship
Another T-56 no bell with new 5th gear set, all else checks out good, includes MGW shifter 1800.00 pick up 44138 Ohio or 1875.00 plus ship
T-56 bell housing 250.00 plus ship
Tremec 3550/TKO 5.0/5.8 blowproof bell housing 275.00 plus ship
10.5" 10 spline Centerforce dual friction clutch less then 100 miles 275.00 plus ship
Dynotech Aluminum driveshaft for T-56 300.00 plus shipp
8 bolt 4.6 billet flywheel 200.00 plus ship....
more parts here also... text for pics and more parts 440-476-4114
Also bought a 96 Cobra with lots of parts.....
has a 393 Windsor with Scat crank, and H beam rods, Ross XL400 pistons, Moroso sump oil pan, Trick Flow heads not sure what model head yet, Comp Cams cam, roller, 236/242 duration @.050 and .555/.576 ground on a 110, retrofit roller lifters according to paperwork, not sure rockers but roller (plan to yank a valve cover and see) Trick flow upper and lower intake with Holley Throttle body and spacer, 44lb injectors, has a 36MM mass air on it needs tuned but car runs good the way it is...
Has a 03-04 Cobra T56 in it, 10 spline Centerforce clutch and shifter, aluminum driveshaft, built 8.8 with gear axles and diff cover ( I need to verify what still) Complete Aeromotive A1000 fuel system, sump gas tank, upper and lower control arms, lowering springs, Tokico white adj., bigger sway bars, battery in trunk, MSD ignition, all A/c parts there, gauges in car some not hooked up..Chrome Cobra wheels.... Fluidyne radiator, Cowl hood, MANY parts here....
6 speed with bell for 5.0 and shifter 1800.00
driveshaft 300.00
many other parts.... ASK.... or text me
engine can be ran and heard for now, if local.... also can be bought many different ways, with or without intake, and so on....
I will add prices or text me for fast response 440-476-4114 big stuff pick up only, will ship most of it.....