ol'red
08-21-2014, 08:41 PM
I have a fresh from the machine shop 87block 302 assembly required.
Nagana fluxed and check for cracks. All the machine shop goodies as I was preparing to turbo this motor but lost funds.
Forged stock pistons
New cam bearings installed
New freeze plugs installed
Standard bore
Decked slightly to removed gasket residue
Brand new Full gasket rebuild
Brand new oil pump
Reconditioned rods
Great crank
Has fresh from shop reworked e7 heads 3 angle valve job
New seals and springs
Nice and clean ready to be put on.
Upper and lower intakes both cleaned.
Needs bearings and piston rings to be put back together. And oil pan bolts and head bolts.
Nagana fluxed and check for cracks. All the machine shop goodies as I was preparing to turbo this motor but lost funds.
Forged stock pistons
New cam bearings installed
New freeze plugs installed
Standard bore
Decked slightly to removed gasket residue
Brand new Full gasket rebuild
Brand new oil pump
Reconditioned rods
Great crank
Has fresh from shop reworked e7 heads 3 angle valve job
New seals and springs
Nice and clean ready to be put on.
Upper and lower intakes both cleaned.
Needs bearings and piston rings to be put back together. And oil pan bolts and head bolts.