94 Mustang GT parts.. many goodies..

[full force]

got this car, white 94 GT black interior with many mods...cracked block..will get pics up asap..

sn94 turbo car
on3 turbo kit with 70mm turbo with cut out and y pipe
13 cobra front brakes and rotors
cobra r wheels
cobra r hood
3.73 gears
f303 cam
arp head studs
double roller timing chain
pro form roller rockers
aluminum drive shaft
bbk 70mm throttle body
bbk valve covers
canton oil pan
edelbrock rpm2 upper and lower intake
msd digital 6al box
msd dizzy
msd coil
aeromotive fuel rails, lines and hoses and regulator
bbk strut tower brace
bbk full lentgh sub frame connectors
fadenzia flywheel
center force dual friction clutch
hardened push rods
high volume oil pump
flow master cat back
aftermarket shock and struts
energy suspension motor mounts
on3 oil filter relocation kit
bbk pulleys
moates quarter horse tuning device
car had bosch 42s in it, but it seems there are orange top venom injectors which are listed as 42s as well
new starter
new radiator
battery relocated to trunk
steeda adj clutch cable and quad
built 3550 trans(it was a dog box, but former owner had it redone with all heavy duty stuff and this trans is rated for 650hp. 26 spline input shaft .


feel free to call/text 440-476-4114

front brakes spoken for already.....

http://i1276.photobucket.com/albums/y478/35mistress/P3268167_zps73a4d5ad.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3268168_zpsc3881290.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3268172_zps14090d0e.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3268175_zpsda976eca.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3268170_zpsde8064e9.jpg

[rpppaprp]

How much for the head studs, rocker arms, push rods, and the F cam? Where are you located?

[1987coupe]

price on intake without tb and adapter and the clutch if its 26 spline please

[toms90lx50]

Price on the rear end

[Rich]

How much for the moates qh?

[slow86fiveoh]

How much for the turbo kit with injectors and mass air

[blue5.8]

how much for drop out motor with turbo kit

[full force]

I am going to start taking it apart now, when I come in I will price some stuff and get back you you guys... bear with me I have TONS of interest in parts...

[pegasus]

price on intake without tb and adapter and the clutch if its 26 spline please

2nd dibbs on the intake but will adapter

[full force]

How much for the head studs, rocker arms, push rods, and the F cam? Where are you located?

west cleveland, I can ship...

studs 40.00
rockers 120.00
push rods 30.00
f cam 120.00
20.00 to ship all

[full force]

price on intake without tb and adapter and the clutch if its 26 spline please

350 for intake
250 for clutch has maybe 1500 miles yes 26 spline

+ ship

[full force]

Price on the rear end

325.00 picked up full brakes and 3:73 gears..

[full force]

How much for the moates qh?

pricing them... gimme a few to see... looks like 349.99 new... so i gotta see going rates..

[full force]

How much for the turbo kit with injectors and mass air

SOLD turbo setup

[full force]

how much for drop out motor with turbo kit

Turbo sold

[full force]

Guys I price things about half of new cost and then determine from there how fast I sell, I try to be fair, if you dont think I am tell me, but I know the market well and sell often so I am very close to going rates...

as of now SOLD.....

Turbo setup
wheels/tires
front brake conversion

[full force]

http://i1276.photobucket.com/albums/y478/35mistress/P3278176_zpsbbb0ecc7.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3278177_zpsb2e7559d.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3278178_zpsed0d5f18.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3278179_zpsa2b3c93e.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3278180_zpsd33810e5.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3278181_zps729f4efc.jpg
http://i1276.photobucket.com/albums/y478/35mistress/P3278183_zpsec29d3a1.jpg

[coleary1992]

How much for your hood and front bumper?

[coleary1992]

Nevermind just the hood. How much for the trans and driveshaft? And any chance you would be willing to meet me at the ford swap meet in cbus for an extra 100?

[slow86fiveoh]

I can't beleive the turbo kit sold 1600 with the injectors isn't half the price a brand new on3 kit is 1595 u do the math

[Rich]

pricing them... gimme a few to see... looks like 349.99 new... so i gotta see going rates..

They are $239.99 new through Power Adder Solutions.
http://www.poweraddersolutions.com/tuning-software-options/chips/moates-quarterhorse-for-fords-eec-iv-eec-v.html

[full force]

They are $239.99 new through Power Adder Solutions.
http://www.poweraddersolutions.com/tuning-software-options/chips/moates-quarterhorse-for-fords-eec-iv-eec-v.html

ok, like I said, I am still pricing parts to get average prices, let me see whats up, I have a buyer for wiring and ECM, let me see if he wants it

[full force]

Nevermind just the hood. How much for the trans and driveshaft? And any chance you would be willing to meet me at the ford swap meet in cbus for an extra 100?

Hood is a cervini 300.00
trans built to TKO 600 specs 1500.00 (trying to get documentation)
driveshaft 200.00 like new

I can bring parts to swap for no additional since I am vending there, but they must be paid for me to hold them..I have paypal if that helps..

[full force]

I can't beleive the turbo kit sold 1600 with the injectors isn't half the price a brand new on3 kit is 1595 u do the math

tsomeone asked me for a price no injectrors before I did research, it sold, nothing wrong with that!

[91lxnos]

price on tranny?? and dash??

[pegasus]

price on fuel system

[iceman1234t]

How much for the dizzy???

[full force]

price on fuel system

the fuel system is the rails, regulator, and lines from fenderwell to intake 400.00 cost 680 new..

[full force]

How much for the dizzy???

200.00 Plus ship

[full force]

price on tranny?? and dash??

trans 1500.00
upgraded for approx 650 hp.... 26 spline input and 31 spline output with HD gears

dash 100.00 no airbags

[80 hate]

how much for the valve covers and hood?

[full force]

hood sold, valve covers 100.00+ ship

[slow86fiveoh]

How many miles are on the tranny and is there any actual paperwork that shows what has been done, it looks like it has been around a while

[Rich]

ok, like I said, I am still pricing parts to get average prices, let me see whats up, I have a buyer for wiring and ECM, let me see if he wants it

Is it available?

[full force]

How many miles are on the tranny and is there any actual paperwork that shows what has been done, it looks like it has been around a while

I am working on getting it, he was looking for paoperwork.. the tras was a 3550 at one point, been all redone to handle the big HP thats why case is older looking plus car sat outside

[full force]

Is it available?

he is taking it, I may have more... you need a 5,0 5 speed ecm? 94-95?

[Rich]

he is taking it, I may have more... you need a 5,0 5 speed ecm? 94-95?

No, the Moates QH

[full force]

MOATES SOLD

[slow86fiveoh]

From what I have learned the only thing different between a tko and 3550 is the input and output shafts all internal gears are the same and there have been a couple 3550 setups on here sell for around 1100-1200 for the tranny, clutch, bell, driveshaft, flywheel and the others were in much better looking condition so what is the bottom dollar on this stuff I'm interested if the deal is right

[full force]

From what I have learned the only thing different between a tko and 3550 is the input and output shafts all internal gears are the same and there have been a couple 3550 setups on here sell for around 1100-1200 for the tranny, clutch, bell, driveshaft, flywheel and the others were in much better looking condition so what is the bottom dollar on this stuff I'm interested if the deal is right

there is difference in gears also, not just shafts... I wont sell the whole conversion for that , I will use it first

[slow86fiveoh]

Indeed a tko and 3550 are the same except the input and output shafts the only difference between a tko500-tko600 is the first gear ratio take it for what it's worth, search around on corral and mustang forums to see what a complete 3550 setup runs used, I'm not being a dick just informing u

[full force]

I would take offers on trans but trans that cost 2400 new, a centerforce clutch thats almost new 440.00 and a new aluminum driveshaft 289.99, and a bell 190.00

all that for 1200, no I will use it first in my own car...

[full force]

I'm not being a dick just informing u

Not taking it that way, I know what I get for my parts thats all, I been doing this a long time... plus swap meet this weekend this will be all gone most likely

[coleary1992]

How much for tb and intake elbow?

[full force]

How much for tb and intake elbow?

180 for both