ALL ford swap meet c-bus roll call

[pegasus]

whos going up its april 5-6 thats friday and saturday

Ill be there saturday atlest
http://springswap.com/swap_pdf/0312-582_ford_flyer_2_lr.pdf

[m347]

Is this one any where as big as the one a few months ago?
I will most likely be there.

[devous1]

I go to nearly everyone, and never buy a damn thing. I am looking for some big block parts.

[mustang_gt88]

I will be there

[maverick]

I have never been to this. Is it worth checking out? Or just something to do?

[2Fast4You]

I always look forward to going, sometimes you end up better than others but always a good time for me.

[draggin50]

I have never been to this. Is it worth checking out? Or just something to do?

Its well worth going even if you dont need anything! Sometimes you can find killer deals and other times nothing but its still a huge swap meet and a good time!

[blown86lx]

I'll be there. I havent met many of you but I would like too. I met chad393na this weekend. He hooked me up on a cam and he was very nice to deal with. Is anyone going to be wearing any bangerz gear?

[mad max]

I will be there on saturday walking around.

[full force]

I will be there selling, feel free to text me if you wanna buy or just meet... 440-476-4114 I was always in Buckeye building, but I think I am now in other building due to a short weekend..

I will have better deals then anyone on fox and lots of SN-95 stuff... parted 2 cobras recently...

[devous1]

I will be there selling, feel free to text me if you wanna buy or just meet... 440-476-4114 I was always in Buckeye building, but I think I am now in other building due to a short weekend..

I will have better deals then anyone on fox and lots of SN-95 stuff... parted 2 cobras recently...

Wanna sell my TR Mach motor for me 23K and and the motor is complete intake to exhaust.

[BuckeyeAlex]

I'll probably be there looking for something to replace my Cobra. Maybe there will be a nice coupe roller and I can scoop up that 4v from ya devous1? Lol

[devous1]

I'll probably be there looking for something to replace my Cobra. Maybe there will be a nice coupe roller and I can scoop up that 4v from ya devous1? Lol

Look no further I have projects out the wazoo.:cool1:

[devous1]

Well, If anyone is interested, I have my AB roller and a shit ton of parts to go with it for sale.

Also my 90 Kenny Brown Super LX, Runs Drive but is has a fair amount of blowby on the rings and I believe the main seal is gone because the last time I drove it last summer it was puking oil REALLY bad. I only live about 20min from the fairgrounds.:drunk:

[winner70ta]

I am going but I wish that they would get back on the Saturday-Sunday schedule. Last year it was the same only on Easter weekend and by comparison to the Fall meet there was only a fraction of the vendors that showed.

[m347]

Friday night seems like a bad plan. How long have they been doing that?

[devous1]

Usually half the vendors are packing it up pretty early on Sundays. I usually go Sat morn. Then go back Sun to lowball the vendors as they are packing. I have only ever bought two major things there.

[full force]

Wanna sell my TR Mach motor for me 23K and and the motor is complete intake to exhaust.

I never have luck selling any kind of engines there... dont even take em anymore...

[devous1]

There is a guy over by Zanesville, that parts out SN95 and New Edge Mustangs. He always has Cobra and Mach motors. I buy some of my parts off him and last Fall at the swap he said he sold 3 4V motors in one month. For him that was really odd because he asks pretty big money for them and sits on them for along time. I thought about loading my trailer with a couple cars and parts.

[devous1]

I will be there selling, feel free to text me if you wanna buy or just meet... 440-476-4114 I was always in Buckeye building, but I think I am now in other building due to a short weekend..

I will have better deals then anyone on fox and lots of SN-95 stuff... parted 2 cobras recently...

Would you happen to have the two mounting brackets that mount on the 8.8 and hold the brake caliper in place. This is for my project 03 Mach, I also need a very clean rear bumper cover.

[coleary1992]

I might go. Ill be looking for a set of heads for my 95 gt and a set of weld prostars for under 500 lol

[slow86fiveoh]

I'll be there too I need a few things and I'm sure I will come back with a little more than I need

[full force]

Would you happen to have the two mounting brackets that mount on the 8.8 and hold the brake caliper in place. This is for my project 03 Mach, I also need a very clean rear bumper cover.

none I keep brake parts together....

[redfirepearlgt]

I'd like to get a few guys in the Columbus area to meet up on 4/6 sometime after lunch. I would like ot get a group to cruise up together late morning Saturday if that is possible. If it rains we can go by other vehicles but still hang together. Doesn't matter to me either way. Speak up if interested.

Maybe we could get DEVOUS1 and/or BLOWN86LX to give us a place to meet them and cruise in from there.

[700hp04mystic]

Would you happen to have the two mounting brackets that mount on the 8.8 and hold the brake caliper in place. This is for my project 03 Mach, I also need a very clean rear bumper cover.

I think you can get those at advanced for like 20 bucks a side.

[full force]

Anyone going and likes the best burger ever... go to Thurman Cafe... AMAZING!! be prepared top wait for a while though... it's worth it

[pegasus]

I'd like to get a few guys in the Columbus area to meet up on 4/6 sometime after lunch. I would like ot get a group to cruise up together late morning Saturday if that is possible. If it rains we can go by other vehicles but still hang together. Doesn't matter to me either way. Speak up if interested.

Maybe we could get DEVOUS1 and/or BLOWN86LX to give us a place to meet them and cruise in from there.

im down to clown
just let me know

[pegasus]

hey next year what do you think about having a sbz booth??? ill get the info when i get up there fri or sat

[chrisb1961]

I'll be there Saturday

[devous1]

hey next year what do you think about having a sbz booth??? ill get the info when i get up there fri or sat

Do you mean to recruit members like some of the other clubs, or to sell stuff. I know I always have parts to get rid off but not enough to get a booth. I have a ton of Mach1 stuff including 2 motors to unload.

[devous1]

This is what my friend recommended, he lives in Grovetucky (no offense). I've never been there but can scout it out if anyone is interested.

http://www.buffalowingsandrings.com/#/locations/oh/grove-city-greater-columbus

[m347]

Do you mean to recruit members like some of the other clubs, or to sell stuff. I know I always have parts to get rid off but not enough to get a booth. I have a ton of Mach1 stuff including 2 motors to unload.

Any chance you have a driveshaft for a 70 Mach 1 with a c4 and a 9 inch or do you have late model Mach 1 parts?

[devous1]

Sorry, my Machs are all 03 autos

[pegasus]

Do you mean to recruit members like some of the other clubs, or to sell stuff. I know I always have parts to get rid off but not enough to get a booth. I have a ton of Mach1 stuff including 2 motors to unload.

both, A. it would give us all a meet up spot. B if every one that wantted to sell parts would chip in 10-15 bucks Im sure we would have enough to pay for the both we just have to keep good records C we could have a laptop set up so ppl can join in on the fun:popcorn: D I could give out free mamagrams:bigthumb

[full force]

Dont forget to go to Thurman cafe for amazing burgers!!!

[devous1]

The Thurman definately rocks, parking in that are can be a PIA. I haven't been in the in about 10yrs. We were gonna go weeks ago and it was packed so we went to Schmidts.

I would def sell some parts, just do it like the antique stores put a small post it note on each part with a seller number and price. Is it too late this time around? You could also sell SBZ T-shirts and stickers.

[full force]

I dont put prices on anything, its a swap meet... people see that and keep walking many times, I do... that tellls me they have the time to sit on it.... I make upo prices as I go!!