Frame ties

[Kevin1989]

Does anyone have a set of full length weld on sub Frame connectors? I need a set. And no I don't want to make some.

[akagreg3]

Does anyone have a set of full length weld on sub Frame connectors? I need a set. And no I don't want to make some.

http://www.latemodelrestoration.com/item/LRS-SUBS/79-04-Mustang-Black-Steel-Subframe-Connectors

it seem i saw a set for 49$ some where tho

[jktruckin06]

I used the maximum motorsports full length ones, got them from American Muscle shipped for 110 I think it was. I even cut them off the vert I had and just put them on another car. Nice quality pieces.

[5.0calypso93lx]

I used the maximum motorsports full length ones, got them from American Muscle shipped for 110 I think it was. I even cut them off the vert I had and just put them on another car. Nice quality pieces.

This. The MM's are nice. Rob at Rogue installed mine, but he said he has to modify pretty much any set of off the shelf SFC's so they contour to the floor better.

[jktruckin06]

Yep. The are angled in 2 places, we had to bend them a bit more to match them up. After doing them twice, I'm not happy with the looks of my welds on either, I would just pay someone to do them.

You need the car level with the weight on all four tires as well.

[m347]

http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=181080715580&catId=6000&item=181080715580

Are these the ones you guys are using?

[jktruckin06]

I got the bare metal ones. Cause I figured you have to clean spots of it to weld anyway. Save the money and coat them yourself

[5.0calypso93lx]

http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=181080715580&catId=6000&item=181080715580

Are these the ones you guys are using?

Those are exactly what I have. I got mine when they were running a sale though so I ended up getting the coated ones for the bare SFC price tag.

[Kevin1989]

How much is it going to cost me to install these ?

[m347]

I got the bare metal ones. Cause I figured you have to clean spots of it to weld anyway. Save the money and coat them yourself

Good idea. Would the heat from a welder would burn any of the coating off past where you would need to clean it up for welding?

[jktruckin06]

Kev Rob at rogue quoted a great price for the work involved, we couldn't get our time frames to line up but I would have used him.

[5.0calypso93lx]

Rob is the man, bottom line

[2-Tone]

If you don't want to cut your floorboards with a through floor set like Wolfe etc. I think MM Is one of the best. They will need to be tweaked for proper fit. All unibody cars flex and the connecotrs will need to be adjusted to fit your car accordingly. RRC is one of the best in southwest Ohio.

[Kevin1989]

Rob is the man, bottom line


Kev Rob at rogue quoted a great price for the work involved, we couldn't get our time frames to line up but I would have used him.

how much we talking like 200 or more???

[jktruckin06]

Pretty sure it was more. He is one of the lower priced in the area though. I can do em, but you won't like how we get the car in the air.

[Kevin1989]

Pretty sure it was more. He is one of the lower priced in the area though. I can do em, but you won't like how we get the car in the air.

lol I have acces to a drive on lift and a welder. and im pretty damn decent with a MIG welder. I just don't know if its hard or not

[jktruckin06]

Give yourself a day and some brew and you can do it. Like we said depending on how jacked the chassis is after 20+ years be prepared to bend them a little. If you do it on a weekend day hit me up, I am a semi professional amateur welder. 513-390-3614

[Applejaxx95vert]

The BBK ones I just put on my convertible fit really good, I did have to elongate the hole for the bracket that bolts to the seat, other than that no issues.

[TurboNG]

I have some on this roller you could take off of for 20 bucks

[Kevin1989]

I have some on this roller you could take off of for 20 bucks

I would buy I made a deal with another member already and I'm gonna pick them up this weekend

[jktruckin06]

What ya gettin man

[dr59l]

I bought a set from Holcomb's on mine just like the mms come clear to front an torque box plates. Fit like a glove an took about 2hrs welding

[SLWB16hatch]

Kevin I put the subframes in kennys car and they looked great. The bbks are nice... It's a street car not a race car so full length deals would be overkill with the work and shit it takes to install them...bbks you could put in... Just my opinion....