vortech v1 cobra

[Night/MareCobra]

Its been a whole since i posted on here but i have a vortech v1 supercharger not installed yet I'm trying to make 430-470whp its a stock cobra motor and the v1 kit i got does not have injectors anyone have any idea what I'd need to reach this goal? Fuel system? Pulley? Etc. any help would be appreciated thanks

[JIMS SVT]

Do some 60lb injectors and 8-10 psi should get ya there. A 255 in tank pump should be fine also. And your gonna have to do something about a maf also. You can run a mofia on the stock maf and get by.

[JaysonBourne]

you're gonna need at least 42lb injectors but id go with 60s just to be safe. a 240 in tank pump should be fine or a 340. 10 lbs of boost might be close. just had a buddy with a p1sc on a 98 cobra make 468/422 on around 15lbs of boost with an in tank 340 and 42lb injectors. stock bottom end and bolt ons

[dr59l]

you're gonna need at least 42lb injectors but id go with 60s just to be safe. a 240 in tank pump should be fine or a 340. 10 lbs of boost might be close. just had a buddy with a p1sc on a 98 cobra make 468/422 on around 15lbs of boost with an in tank 340 and 42lb injectors. stock bottom end and bolt ons
Neff got it straight finally?

[700hp04mystic]

yea we got it finally. dam aeromotive 340 pump was cracked and had fuel issues. it was just spraying fuel in the tank when we tried to dead head the pump, that's how we finally figured it out.

[700hp04mystic]

also the car has a x pipe, cat back, and 430 gears, stock manifolds and everything else. that's not really a Bolton car

[blown96cobra]

I've got a meter u won't peg at that power level if u need one. It'll cost u the sane as buying a mafia.

[dr59l]

Good now he can enjoy the boost

[700hp04mystic]

I also have a set of 60's and a sct 2600 for sale.

[JaysonBourne]

guess i was wrong. it was a little over 13psi.. pretty damn good numbers