90 GT roller and rolled 93 GT donor car

[motox159]

Package deal here guys. Not interested in seperating. 90 roller is clean with one spot of rust on the hatch (the usual), and a door ding on the drivers side wheel well. Shock towers are spotless and underneath is the same. Pass side door has a decent dent in the bottom part, have a replacement door that goes with. 8.8 from the 93 is swapped over already. Both are 5spd set up cars. Roller is pretty much complete minus a few body panels. 5.0, t5, all wiring and many parts there. $1500 is the price. Can text a few pics, will try to get some posted up this weekend.

[jktruckin06]

Damn that's a killer deal.

[motox159]

I would love to build it and everything is there, just focused on my truck build for the time being and will not have any time to mess with this for years to come. Quite a few other extra parts with this package too.

[slow86fiveoh]

Send a few pics to 937-779-7416

[lxenvy]

Send a few my way plz. 859-814-7689 establishedn1984@gmail.com

[motox159]

Pics sent fellas. May have a little more dust on them now as they sit in a barn.

[bbford]

Pics sent fellas. May have a little more dust on them now as they sit in a barn.

can i get some pics also 513 266-2109 thanks

[jktruckin06]

Man put me in for some shots. 513-390-3614.

[Xowner]

John send me the pictures ill post them

[draggin50]

Send me pics as well. 937-944-3547

[motox159]

Xowner, where do I need to send them to you? I don't have one of those "smart" phones I can post from. Other guys, sending pics now. Thanks.

[motox159]

Motor is pretty much stock, jlt cold air intake, underdrive pulleys (not sure of brand), believe it has stock shortys. Rear is rollin with 3.73's from what the PO told me. I did drive the wrecked 93 before it was wrecked. Ran very good.

[jktruckin06]

I just forwarded them to him.

It looks like its just missing fenders, headlights and side skirts.

[motox159]

Fenders, headlights and all skirts are there just not mounted in pictures. Stock hood there too. Also have a cobra r hood to get rid of posted in exterior section. Cobra back bumper but would need to be cleaned up a bit from where PO notched the bottom for exhaust tips. Roller had tan interior with a few pieces missing. The front leather seats are pretty much trash. Had planned on swapping the grey from the wrecked over to the good body.

[Xowner]

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BMDUxNzExMTUzNy5qcGc_zps1c80726d.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BMDUxNzExMTUzNi5qcGc_zps5b23393f.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BMDUxNzExMTUzOC5qcGc_zps0f4d30d1.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BMDUxNzExMTUzN2EuanBn_zps07a6caa2.jpg

Just got home sorry for the delay

[9cobra4]

Man that's a crazy good deal. Someone will snatch this up soon I'm sure.

[motox159]

Thanks for posting those Xowner :bigthumb

[leroy93lx]

What parts are still salvageable off the red car? Any chance of getting interior pics of both? Blue car have any exhaust parts with it? Thanks

[motox159]

Red car-motor, trans, rear(already swapped to blue), driveshaft, wiring(harnesses and 5spd comp.box), seats, carpet, door panels, most interior parts except drivers kick panel and I believe pass side quarter window piece. Side skirts are taken off to go with the blue car. Most of the interior is already removed from the red car and pretty much stacked inside the blue car. Blue car was missing a few of the interior plastics, had no carpet and the front seats were trash. My idea was to swap the gray seats, carpet and other interior pieces over to the blue car. I had planned on doing the black dye on the plastics and having the seats recovered to black along with dropping black carpet in her. Blue car had tan interior. No exhaust with either, red car may have aftermarket shorties on it but cannot confirm that at the moment. Sold the H-pipe to decker a few years back. Had flowmasters on i and dumps but exhaust was pretty ratty all around, mufflers are being used on my truck. I'll try and get some interior pics but basically the red car is stripped and the blue car is loaded down!

[motox159]

I will be honest with everyone. It will take a little bit of work to get this thing going. Not a straight pull this motor and drop it in and everything will fire right up. If it was that way I would have been driving it by now!!! I feel the condition of the roller and 98% of everything there...this is a pretty good price. There are alot of extra parts, doubles of things here that can be sold after the fact. No time to part out and I really don't want to mess around with that.

[Stangman]

If my buddy and his wife weren't having a kid in the next week, he would be on this like white on rice. Too bad its not tax time in 2014 right now .... he would have already scooped it up from you as quick as I told him.

[motox159]

Depending on how this "fiscal cliff" situation goes I don't know when any of us will get our tax return! Not pressed to sell, would love to see someone make a good car out of this. Amazing how kids and family take away the "me" time but it's all worth it. One project at a time for me.

[1_slo_92]

I have seen 6 people out of 12 that have filed their taxes in my department at work already get they're return through direct deposit.

[motox159]

My bother in law does all of mine, basically the same way. He does it online an we get it back within 3-5 days. Had read something in the paper a few days ago relating to the returns and fiscal cliff situation. Something about alot of delays. We'll see how it all goes.

[1_slo_92]

I had mine filed the 30th and.mine is still ''processing''

[motox159]

Anyone interested in checking these out Sunday give me a call. 513 460 5088.

[motox159]

Weekend Bump!

[Stangman]

Someones getting a serious deal here... I seen this stuff in person!

[motox159]

Thanks Stangman...still contiplating the option of selling the roller and puttin the 5.0 goodies in the old truck! I don't know tho, its almost side/brickwork season for me and might end up collecting the funds to put it together. See what happens.

[jktruckin06]

Sounds like you can't go wrong either way. Wish my situation was better for taxes!

[motox159]

Still here. May start throwing wrenches if cars dont sell! Open to offers, don't hurt my balls too bad.

[motox159]

Bump...$1200 for everything there. Low as I will go. Somebody wants a solid starting point!

[m347]

Do you have a title for both cars?

[motox159]

I have both titles. The roller is in my name, rolled is still in PO's name/dads name. This is as low as I will go period. Nothing is hurting them sitting in the barn.

[9cobra4]

I wish I would get my freaking refund back. I would be all over this.

[motox159]

BUMP it UP!

[motox159]

One more bump for old times sake! May seperate but would like to sell the roller first!

[WideOpenThrottl]

Lmk if you're wanting to separate full drive train... I need motor, trans, and wiring harness.

[motox159]

I'll keep you posted fella. Gotta at least get the roller out the way. Thoughts of using the 5.0 an T5 in my F100 linger in my head lol.

[WideOpenThrottl]

Thanks. I feel ya, I want it to swap into my 68 Fastback and have EFI!

[suprat]

interested. pm'ed you my number

[motox159]

LOCK IT UP, SOLD SOLD SOLD! Sad to see them go...

[Stangman]

Congrats! I know the feeling too