WTB p/s steering shaft with rag joint for fox

[NXcoupe]

I need the p/s steeri.g shaft off of a fox, prefer a 90 to 93 unit, but as long as it will work and the rubber is good, Im game. Let me know if you have one and Ill come get it.

[331lx]

dam mike i just threw my whole rack and steering shaft away, oops...

[k062693w]

I believe I have mine off my 85 Mike if that will help ???

[SN95N/A]

Got one off 89 notch I just picked up I can double check for u after work tomarrow..i know u said 90 and earlier it should work tho.

[NXcoupe]

Thanks guys! Aaron, Im not sure if a pre 89 will work, since this is an airbag car. Im going to get it off and I could match it up that way. Let me know on that 89, it may work.

[MFIELD]

D you just need the rag joint? You can buy them seperate at the parts store.

[NXcoupe]

I will check that out and see if I can get this thing apart. It's pretty rusty and crappy, that's why I was looking for another one to replace it. I'm not sure it'll come apart without a fight.

[MFIELD]

I may be wrong now, I looked online for it but cant seem to find anyone that carries it now. I know I bought one before and replaced it. If I remember correctly you grind the factory rivets off and it came with bolts.

[NXcoupe]

huh, well that explains why I've never seen one then. I'll ask, but if you can't find it online, then I doubt they exist. I will keep looking for a used one. I used to have a few of these in my basement, no idea where they went when I moved tho.

[NXcoupe]

Got one off 89 notch I just picked up I can double check for u after work tomarrow..i know u said 90 and earlier it should work tho.

Any luck?....

[NXcoupe]

I believe I have mine off my 85 Mike if that will help ???

If it's an 85, it just might? Not sure, I looked at it again today and compared it to the 89 and it looked the same. Can you snap a pic and send it to me? If not, that's cool, I'll just snag mine out and bring it up to match it up.

[MFIELD]

I knew I wasnt crazy. Dorman makes them. Well completely crazy at least. Should be able to find it localy I would think.

http://www.summitracing.com/parts/rnb-31000?seid=google&gclid=CM6omO798LQCFcKPPAodr0sASg

[coleary1992]

I have a perfecrly good steering rack of of a 89 gt. When I pulled my motor for my v8 swap, I kept thw 4cyl rack in my car. Name your price

[k062693w]

I'll snap a pic tomorrow Mike ...

[NXcoupe]

Thanks everyone, nevermind Aaron but thanks again, I found the dorman kit and Im just going to fix it on the car. I appreciate all the help! Sbz rock

[NXcoupe]

I knew I wasnt crazy. Dorman makes them. Well completely crazy at least. Should be able to find it localy I would think.

http://www.summitracing.com/parts/rnb-31000?seid=google&gclid=CM6omO798LQCFcKPPAodr0sASg

Thanks Mike, I found it this morning and got on here to tell you the part num, but you already found it, lol. Thanks again.

[MFIELD]

Sure thing

[SN95N/A]

I have the part u need sorry I didnt get on here last nite but looks like you found one.

[NXcoupe]

I have the part u need sorry I didnt get on here last nite but looks like you found one.

If it turns out I need it, Ill let you know, thanks again!

[Rich]

I have a perfecrly good steering rack of of a 89 gt. When I pulled my motor for my v8 swap, I kept thw 4cyl rack in my car. Name your price

I'm interested in the steering rack...

[m347]

http://www.autozone.com/autozone/parts/Dorman-Steering-Coupler-Assembly/_/N-5yc1s?itemIdentifier=730051
No shipping charge at auto zone