Pair of Prime 15x7 Wheels (Weld Draglite Knock-offs)

[leroy93lx]

I have a pair of of Prime Wheels style 231. These are a knock-off of the Weld Draglite but only has one bolt pattern. These are 15x7 wheels with 5x4.5 bolt pattern and a +20 offset. These would work on Ford and Mopar with 5x114.3mm bolt pattern. The wheels weigh 15 lbs each. I was going to put a set of 26x8 slicks on them for a Mustang but have since changed my mind. The wheels are in good shape but aren't perfect. They need a good polishing. They have no bends or major curb rash. They do have a few nicks on the wheel lip. Kind of looks like the tire mounting machine did it. If somebody wanted to put the effort into them they could be nice. They have a little pitting that could be sanded out on both rims. Looks like they were leaned against the wall for a long period of time with moisture laying on them. Easily sanded and polished out. They are plenty decent enough to be used for an extra set of wheels for slicks or drag radials. They dont have any center caps but it appears that Weld center caps are the same size. $125.00 OBO or possible trade for other Mustang Parts

http://i180.photobucket.com/albums/x191/leroy93lx/110FF8BE-523A-4F96-8420-76B07B466546-335-00000011F06B6AFA.jpg

http://i180.photobucket.com/albums/x191/leroy93lx/61CB265B-9EEE-4083-AE30-9B2C57956763-335-00000011E6564B0A.jpg

http://i180.photobucket.com/albums/x191/leroy93lx/F2FD16AE-FB47-472C-9973-16053470C533-335-00000011DCE170D4.jpg

[leroy93lx]

$100 for the pair. These are 4.5 inch backspace also. Will trade them for other parts

[toms90lx50]

Were in Indiana you located

[leroy93lx]

New Castle, IN 47362

[m347]

What style lug nuts do these wheels use?

[leroy93lx]

Appears to just be normal acorn style. They are recessed unlike Welds with washers.