Parting out my car lots of good parts!

[AntiRice427]

I'm parting my car out. I'm ready to get something different and I think that this will be the best way to sell it. If your looking for foxbody parts check the lists. Most of this stuff is for a fox body even though the car is an SN95. This car was stock when I bought it 4 years ago and I have been building and upgrading it since, so most of the parts are not very old. Most parts have less than 3000 miles on them, and some have even less than that. I'm not in a hurry to sell, and all prices are firm.

-1994 Mustang GT factory black on black 5 speed $4000
65k miles, clean OH title, no rust anywhere, very clean interior. Custom paint job done in 2011. It was base coated in the factory black color then custom airbrushed to look like plate steal rivited together. There are "tear outs" on the front and down the sides to make it look like the car has another paint job underneath. This was done in House of Kolor's True Blue Pearl and also has the plate/rivit look airbrushed in it. The engine compartment was also painted. I'm selling the car with no suspension or drive train. It has casters on it so it can be easly moved around and loaded on a trailer. The car has no seats, but the rest of the interior is all there. It has UPR subframe connectors, battle boxes, and the torque boxes have been reinforced. HO fibertrends cowl hood with UPR billet hood pins, OEM Ford Cobra front bumper, clear head lights, smoked tail lights, Autometer tach with shift light, -6an fuel line conversion fittings. The car comes with the stock computer, wiring harness, and trans cross member. The car has been setup to use an 86-93 throttle body (throttle cable and wiring for TPS,and IAC was changed). I will not sell any of the above parts serperate. That's not rust in the pictures of the trunk and rear seat area. It's just the color of the sound deadening material.
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4246.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4247.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4248.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4249.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4250.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4251.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4253.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4254.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/309694_278788915482582_100000544282905_1105464_234 946202_n.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/298345_220516071340356_123184227740208_625638_1471 324163_n.jpg

[AntiRice427]

http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4248.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4210.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4211.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4212.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4213.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4214.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4215.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4216.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4217.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4259.jpg

[AntiRice427]

http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4260.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4261.jpg

[AntiRice427]

-Engine/engine parts

-Turn key 302 long block with Paxton Novi 1000, and GT40P top end. This combo works so good that I would like to keep it all together, but might seperate eventually if there is no interest in it. Stock forged piston 302 with unknown mileage. When I put this combo together back in the spring the cylinders all looked good, no smoke or noise. The main bearings looked good. I installed a new standard volume oil pump and rear main seal. Engine has an F cam in it. It works very well as a blower cam and is a great match for the heads/intake. The rockers, push rods, and lifters are all stock. It has a 9 key way timing chain, but I can't remember what brand. I think it's a Comp Cams. The heads are GT40P's that had just been freshened up before I put them on. They were cleaned, had a valve job, new valve seals, and a set of new .600 max lift valve springs installed. It has an explorer intake that was boiled and powder coated silver (looked brand new). I painted the upper black. The intake also has a 1in spacer. It has an EGR delete plate, 65mm Ford Racing throttle body, and a powerbond harmonic balancer. The headers were bought brand new in the spring. They are stainless Ford Racing GT40P shorty's. Also has a Ford racing water pump. The Novi 1000 is an 8 rib 86-93 kit. It comes with a UPR power pipe, discharge valve, 2 different discharge pipes, comes with the stock upper pulley, and the 2.75 pulley which is on it now. It makes 12 lbs of boost. The blower is in very good shape and has never been over spun. It has never been spun over 50,000 rpms. Max rpm for a Novi 1000 is 52,000. This setup made 457HP to the wheels on pump gas with a T5 trans. If you wanted to run race gas or E85 you could put 2 or 3 more degrees of timing in it and probably make 500hp. This thing is ready to drop in and fire up. $2200 for the complete setup
-Moroso sbf alternator bracket 63810 works with stock or electric water pumps. Mounts on either driver or passenger side. Very nice bracket, like new only a few months old. $90
-UPR under drive pulleys 3022-08 fits 86-93 mustang. Polished billet aluminum. Comes with all bolts. Nice condition $60
-HPM solid motor mounts. All hardware included $40
-UPR coolant overflow tank RPI-6084-NB $35
-Stock 94/95 cooling fan $50
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4313.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4314.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4315.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4316.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4317.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4318.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/img004.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4227.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4240.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4244.jpg

[AntiRice427]

http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4245.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4293.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4319.jpg

[AntiRice427]

-Exhaust

- 3in Mac pro dumps PD8693 86-95 perfect shape $150
- 3in Mac prochamber for 94-95 PC3495 $200
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4286.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4287.jpg

-Interior

-Kirkey seats KIR-16800 with black cloth covers KIR-16811 mounted on stock manual seat tracks. Will bolt right in 79-04 cars. Very nice condition $275
-*SOLD*Black rear seat delete for 94-04 mustang. $60
-Autometer steering column gauge pod for 94-04 mustang ATM-10004 $20
--*SOLD*Autometer triple pillar gauge pod for 2 1/16 gauges. Fits 94-04 mustang coupes. ATM-12121 $40
-*SOLD*Autometer Phantom 2 1/16 electrical oil pressure gauge ATM-5727 $30
-*SOLD*Autometer Phantom 2 1/16 electrical water temp gauge ATM-5737 $30
-*SOLD*Jegs pistol grip shift knob with button for two-step 61576. $40
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4219.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4220.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4238.jpg

[AntiRice427]

-Drivetrain

-Built 8.8 rearend setup for 94-98 mustang. Stock length with 9in ends, welded tubes and brace. Housing was done by Moser Engineering. Moser 35 spline spool and axles with 3in long 1/2in diameter studs. Moser cover, Ford Racing 4.10 gear, Ratech solid pinion spacer, UPR spherical bushings, tabs for anti roll bar. Rearend comes with Aerospace drag brakes that were custom made to work with the 9in ends. I will not seperate the brakes for this reason. All of the brake lines were re done when built. It has braided lines from the calipers to the hard line, and a braidied flex line on top. $1200
-*SOLD* G Force T5 transmission. Face plated 1st-4th with 5th gear synchronized. 2.92 first gear. Works perfect. Comes full of Royal Purple manual trans fluid. $1850
-Mcleod SFI bell housing 8660 for 302/351. Comes with all hardware and centering rings for T5 or Tremec transmissions. $175
-Billet steel SFI 157t 50oz flywheel brand new. It does not say what brand it is. For 86-95 5.0 needs re surfaced. $100
-*SOLD*Fidanza SFI aluminum flywheel 186501 157t has less than 3k miles. $175
-*SOLD*Spec stage 2+ clutch SF483H has less that 3k miles $200
-Solid transmission mount 79-95. I forget what brand this is and it does not say. I drilled some extra holes in it so it would work in my car. $20
-*SALE PENDING*Ford Racing aluminum drive shaft M-4602-G I had this shortened 1" so that I could move my engine back an inch by using the rear slots in my k memeber. $180
-Steeda billet aluminum driveshaft spacer 0.687" 555-7707 comes with hardware $25
-Pro 5.0 shifter for T5 or T45 comes with Pro 5.0 handle $120
-Steeda adjustable clutch cable, UPR firewall adjuster, Zoom aluminum quadrant. Selling as a package for $40
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4225.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4228.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4229.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4233.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4234.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4241.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4242.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4243.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4289.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4291.jpg

[AntiRice427]

http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4324.jpg

[AntiRice427]

-Suspension

-UPR double adjustable solid upper control arms 79-98 mustang 2001-01 $100
-UPR adjustable solid lower control arms 79-98 mustang 2002-01 $100
-UPR anti roll bar 79-04 mustang $150
-*SOLD*UPR 79-93 Pro series front K member kit 2005-79k-100 Has 14" 150lb springs $450
-UPR 79-93 bump steer kit 2009-79-man $75
-UPR 79-04 rear coil over kit for Strange shocks 2006-112. I'm selling this kit with the 79-93 10 way shocks. Kits comes with 10" 175lb springs and all installation hardware. $265
-*SOLD*UPR 94-04 caster camber plates. 2014-94-04 Polished billet aluminum. $115
-Strange 94-04 10 way adjustable struts S6005LM $140
-Flaming River 79-93 manual steering rack FR1503-1 Like new $150
-Flaming River 94-04 steering shaft FR1509MPL $200
-Foxbody V8 spindles with 5 lug drilled/slotted rotors with 3in studs, calipers, and Russel braided brake lines. $175
-Biondo line lock soleniod $25
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4221.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4222.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4223.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4224.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4288.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4292.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4294.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4296.jpg

[AntiRice427]

-Ignition

-MSD 6AL2 Programmable 6530, like new with less than 1500 miles comes with original box, all paper work, cable, and software. $250
-MSD HVC blaster coil for 6 series ignitions, less than 1500 miles. $80
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4230.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4232.jpg

-Fuel/Air

-Ford Racing 42lb injectors, not sure on the miles, work perfect $200
-Kirban fuel pressure regulator mounted to stock 86-93 rails with -6an fittings, and braided lines $65
-Summit Racing fuel pressure gauge with inline -6 fitting $15
-Stock gas tank with 255lph pump $75
-Lightning mass air meter with filter adapter and K&N filter $100
-Diablosport Mafia $100
-UPR Big Mouth air filter for pmas velocity meter and others. Like new $20
-SCT 4 bank eliminator chip with switch and cable $150
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4226.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4235.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4237.jpg
http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4323.jpg

[chad393na]

Bump for a great seller, all his stuff is top notch!!:bigthumb

[AntiRice427]

Bump for a great seller, all his stuff is top notch!!:bigthumb

Thanks man!

[AntiRice427]

Summit fuel pressure gauge is sold.

[AntiRice427]

This stuff is all located in Dayton.

[boostd]

Got a number I can contact you at? Several parts I want.

Bill

[5.0calypso93lx]

Maybe I missed it, but what do you want for that clutch fork?

[COOP]

Do you know if the clutch cable, adjuster and quadrant will work for a fox? If so, I'll take them


Edit: just checked, it'll fit. I'll take them

[AntiRice427]

$35 for the clutch fork

[5.0calypso93lx]

If you're willing to ship, I'll take it.

[AntiRice427]

Clutch fork is sold

[HawksWR37]

How much for the hood?

[Gongshow]

I want the steeda clutch cable/quadrant/adjuster will fit my 92 t5 car correct?

In good shape?

If so I will take it sir.

Thanks!!!

[AntiRice427]

Sale pending on cable/adjuster/quadrant to COOP

[AntiRice427]

How much for the hood?

Nothing on the car is being sold. Only the parts that have been removed are for sale.

[2Fast4You]

PM me a package deal on the Kirky seats and bump steer components.
Thanks

[Gongshow]

Will send cash for cable quadrant adjuster if not sold yet just say the word.

859 414 8795.

[AntiRice427]

All prices are firm

[00 4V Stang]

So 2 front struts for 140?
Will u sell just rear coil-over kit?

[AntiRice427]

So 2 front struts for 140?
Will u sell just rear coil-over kit?

Yeah that price is for both struts. They are in like new condition. That coil over kit requires you to modify the shocks. Thats why I'm keeping them together.

[00 4V Stang]

Ill take the front struts then. Pm number and where your located. Oh i didnt know that i already have strange 10 ways on the rear.

[MWoods26]

Ill take the front struts then. Pm number and where your located. Oh i didnt know that i already have strange 10 ways on the rear.

thats a great price he has his rear coilovers for. I would be interested in just the rear shocks if you wanted to work something out since you already have the shocks on your car.

[00 4V Stang]

Be fine by me.

[AntiRice427]

Alternator bracket sold.

[AntiRice427]

Adjuster, cable, and quadrant are sold.

[AntiRice427]

Ford Racing aluminum drive shaft M-4602-G I had this shortened 1" so that I could move the engine back an inch by using the rear slots in my k memeber. $180

http://i245.photobucket.com/albums/gg54/AntiRice347/IMG_4297.jpg

[na svt]

Ford Racing aluminum drive shaft M-4602-G I had this shortened 1" so that I could move the engine back an inch by using the rear slots in my k memeber. $180

What's the length of the driveshaft?

[AntiRice427]

I believe stock is 45" from center eyelit to center eyelit and this one was shortened exactly 1" so 44".

[AntiRice427]

Steering rack is sold.

[AntiRice427]

Any other bangerz need parts before I post it all on Corral?

[MWoods26]

Are the struts sold or not? If not I want them and can come get them this weekend.

[na svt]

I want the driveshaft if you'll throw in the spacer.

[Rich]

Mike, If you decide to part out the engine...I might be interested in the intake and TB.

[AntiRice427]

Pro dumps and Strange struts are sold.

[2Fast4You]

I want the Kirkey seats and bump steer kit, let me know when we can meet.

[AntiRice427]

I want the Kirkey seats and bump steer kit, let me know when we can meet.

Anytime man

[1baddlx]

Rear coil over setup still available?

[AntiRice427]

Rear coil over setup still available?

Yep .

[qwk93ta]

Are you selling the interior parts?

[1baddlx]

Yep .
Would it be a direct fit for.a.foxbody?

[AntiRice427]

Yeah its a fox kit and fox shocks.

[1baddlx]

How much coin for the coilover kit?

[AntiRice427]

All gauge pods are sold.

[AntiRice427]

Rear coil over setup is sold.

Why can't we edit our own classified adds?

[2Fast4You]

I'm available this weekend if you are, just PM me.

[coleary1992]

Still have the 3" mac pro chamber

[AntiRice427]

Still have the 3" mac pro chamber

Yes .

[AntiRice427]

SCT chip, and MSD box are sold.

[AntiRice427]

*SOLD* Kirkey seats, bump steer kit, drive shaft spacer, and trans mount *SOLD*

[2Fast4You]

Thanks and nice to meet you Mike.

[mustangrodtp]

Pm me a ph # I would like to talk about the rearend. Thanks

[AntiRice427]

Thanks and nice to meet you Mike.

No problem you to!

[SLWB16hatch]

Man I absolutely want that shell....lol

[AntiRice427]

Mcleod bell housing is sold.

[AntiRice427]

Engine/blower combo, 42lb injectors, lightning meter, fuel rails/regulator, and motor mounts are sold.

[AntiRice427]

Driveshaft is sold.

[AntiRice427]

Here is a list of what is left

-The car
-Rearend
-Prochamber
-Billet flywheel
-Pro 5.0 shifter
-Flaming River steering shaft
-Fox V8 spindles with brakes
-Line lock
-MSD coil
-UPR air filter

[maverick]

This is the first time I seen this thread, That was a sweet build AntiRice427

[AntiRice427]

This is the first time I seen this thread, That was a sweet build AntiRice427

Thankyou! It was fun to build and drive. I wish I could have kept it together but it was worth almost twice as much in parts.

[Rich]

What's next Mike?

[AntiRice427]

What's next Mike?

I haven't decided yet. Definitely something fun that I can put the whole family in. I'm probably going to get a couple atv's for my wife and I to ride also.

[AntiRice427]

Steering shaft is SOLD

[Adams89]

Will the rear end work in a 88 notch? How about the spindles and brakes ? I'm slowly learning what parts will interchage. I would like to do a 5 lug swap on the car.

[AntiRice427]

Will the rear end work in a 88 notch? How about the spindles and brakes ? I'm slowly learning what parts will interchage. I would like to do a 5 lug swap on the car.

The spindles are from a 87-93 V8 mustang so they will work. The rear end has 94-98 length axles in it which are a little longer than fox bodies had, but it would work. People swap 94-98 rears into fox bodies all the time because it's a quick way to get disc brakes and 5 lug axles.

[Adams89]

Im sorry I read your description and I am building this car to run at Mid-Ohio and the drag brakes wouldn't work. I'm interested in the spindles, shifter, and coil. Where are you located.

[AntiRice427]

Im sorry I read your description and I am building this car to run at Mid-Ohio and the drag brakes wouldn't work. I'm interested in the spindles, shifter, and coil. Where are you located.

You wouldn't want a rear end with a spool either then. Chad393NA has a rear you might be interested in. I'm located in Kettering.

[Adams89]

Does Chad have the rearend posted on here ?

[AntiRice427]

Does Chad have the rearend posted on here ?

Yeah but I guess he is not selling it now.

[AntiRice427]

Spindles and brakes are sold.

[AntiRice427]

Rear end is sold.

[AntiRice427]

Control arms are sold

[AntiRice427]

Pro 5.0 shifter is sold