Mustang Parts Garage Sale!

[5.0calypso93lx]

Have a bunch of parts laying in the garage that I'm not going to be using anytime soon. All pricing is FIRM and picked up in Milford, 45150. Please call or text me at 513-315-6583. Will wait a few weeks before listing on Corral.

Stock 302 Oil pan with a -10 bung welded on by Rob at Rogue Race Cars:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_0141.jpg

$40

302 7/16" ARP Head Studs. A few were used to torque down a cylinder head to check for PTV clearance:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_8317.jpg

$60

Maximum Motorsports 302 Motor mounts. Best motor mounts out there IMO as these are boxed in unlike most others. Brand new but mounted:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_7955.jpg

$40

Moroso Alternator bracket. Perfect for passenger mounted turbo guys to get the alt out of the way of the heat. Brand new but mounted. Aluminum standoff in head does have some wrench marks on it from being tightened. This is $120 new.

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_6654.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_7809.jpg

Oil filter relocation kit for 302. Upgraded with AN lines and fittings. No jank rubber hose and clamps like the On3 junk. Name brand pieces, I believe Moroso and Canton, but will confirm. Brand new filter included...

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_6651.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_2436-1.jpg

$100

Fabricated Aluminum Valve Covers. These are the "good" looking VC's in my opinion. No long through bolt like the cheaper ebay VC's. Nice thick rail for mounting to the head unlike a lot of the cheaper sets. -10's welded into each cover by Rob at Rogue Race Cars. Brand new.

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_5773.jpg

$100

Moroso Ultra 40 Race plug wires. Black in color. Brand spanking new in box. Part number 78316. http://www.summitracing.com/parts/mor-73816

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_5680.jpg

$75

94-95 Mustang Fuel Rail. Higher flowing than the 87-93 rail and is a direct bolt on. These are somewhat tough to find. Aeromotive fuel pressure regulator, part number 13102. Will NOT seperate. Reg is more than asking price alone. http://www.summitracing.com/parts/aei-13102/overview/make/ford

$100

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_5408.jpg

[5.0calypso93lx]

Stock alternator bracket with tensioner, idler and hardware:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_5264.jpg

$20

Stock fox alternator with blade cover. Pulley not included (pulleys will be sold as a set).

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_3177.jpg

$20

302 Timing cover for standard rotation water pump. Matching standard, aluminum rotation water pump, reman'd unit, brand spanking new. Custom ribbed water pump pulley from ASP, brand new. All work together and work perfect with a driver side mounted alternator.

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_2201.jpg

$90

3.5" Single turbo exhaust. Connects right where a standard downpipe ends. Bullet muffler with turndown.

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1169-1.jpg

$80

UPR billet timing pointer. New, but mounted. http://www.uprproducts.com/mustang-small-block-ford-timing-pointer.html

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1127-1.jpg

$30

BBK Ceramic coated 1 3/4" Long Tube headers. Worked with a C4 automatic and a T5. Not sure if these will work with an AOD. Passenger side has one small dent in primary.

$200

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_0450.jpg

[SCHMUCKINGHAM]

I am interested in the motor mounts

[5.0calypso93lx]

The Team Z's or MM's?

[Gearhead]

Hey James....I'll take the Fuel Rail and Regulator !!

You sure you really want to sell all this stuff ?? If you're burned out or don't have time for it anymore, just push it all into a corner, let it sit and get back to it in a few weeks/months/years....

-Scott

[5.0calypso93lx]

Hey James....I'll take the Fuel Rail and Regulator !!

You sure you really want to sell all this stuff ?? If you're burned out or don't have time for it anymore, just push it all into a corner, let it sit and get back to it in a few weeks/months/years....

-Scott

I'm sure :)

[SCHMUCKINGHAM]

The Team Z's or MM's?

Since the Team Z's are standard height I would rather go with the MM, keep it all the same brand :)

[2Fast4You]

Package deal on the VC's, timing pointer and timing cover w/ pump and pulley?
PM me.

[5.0calypso93lx]

Since the Team Z's are standard height I would rather go with the MM, keep it all the same brand :)

Works for me. Let me know.

[5.0calypso93lx]

Package deal on the VC's, timing pointer and timing cover w/ pump and pulley?
PM me.

PM sent....

[5.0calypso93lx]

Pending Items:

-Headers
-Valve Covers
-Timing Pointer
-Timing cover, water pump and pulley
-Maximum Motorsports motor mounts

[5.0calypso93lx]

Sold items:
-k member
-oil pan
-ARP head studs
-water pump, timing cover and asp pulley
-headers
-pointer
-mm motor mounts
-valve covers

Pending:
-fuel rail and regulator

[5.0calypso93lx]

Still have quite a few parts.

-Oil Filter relo kit
-Alt bracket
-Plug wires
-Stock alt and bracket
-Team Z motor mounts

[5.0calypso93lx]

One last bump before I list this shiz on corral!

[bbfstanger]

how much for the moroso alt bracket?

[5.0calypso93lx]

how much for the moroso alt bracket?

Sorry about that, $65.

[5.0calypso93lx]

Still have:

-Moroso bracket
-Plug wires
-Oil relo kit
-3" exhaust with bullet muffler

[5.0calypso93lx]

Plug wires are sold.

[bbfstanger]

will that moroso alt. bracket work with a csr pump?

[45133Stanger]

You said all pricing is firm, but let me know if you will come down on the Alt. bracket