Coyote Dyno Day

[smytty]

Ive been Pming Craig at Cincy Speed about a dyno day...
SO here it is...

September 29th , not this Sat but next....
Starts at 930 Am, $40 cash for 2 pulls or $50 for a Credit Card

This can be for other cars also besides Coyotes.

Just post in this thread if you can make it...

I would like to have a good amount because i dont wanna waste his time if only a few can make it...

Looking forward to Bsing and meeting some new people...:bigthumb

[exrider416]

I do not think mine will be out of the bodyshop by then

[Gongshow]

Requesting off work...

[Brandon Alsept]

That gonna include Air Fuel ? May have a customer or two that may get in on it.

[redfirepearlgt]

I will plan to be there. Looking forward to it.

[smytty]

That gonna include Air Fuel ? May have a customer or two that may get in on it.I just Pmed him when he replys ill let ya know:bigthumb

[beefcake]

gotta work

[sean]

I also have to work.

[302coupe]

No way of doing it on a sunday

[Maximus]

No way of doing it on a sunday

I agree. Thats why its on a Saturday. :)

AF included.:bigthumb

[2Kblacksleeper]

Sorry I'll still be in Myrtle beach.

[Brandon Alsept]

Ok now one more question. Any idea on time frame for that day. BEST case scenario I wouldn't be there till 2PM with a customers 2011, as I just realized that is my Saturday at work.

[Maximus]

Ok now one more question. Any idea on time frame for that day. BEST case scenario I wouldn't be there till 2PM with a customers 2011, as I just realized that is my Saturday at work.

Depends on the car count. Call us before you head over and Ill let ya know where we are at car wise.

[Gearhead]

Is this still a go ?? I'd be kind of interested to see what my bone stock car will dyno at....

[Maximus]

YES!:bigthumb

[70mm_LS1_Eater]

I'll be there! Bone stock!

[smytty]

YEp ill be there, im hoping a few more people show.. I posted it on a few other sites and got the i might make it...

[exrider416]

I'm pretty sure my car will be finished by then, so i will be there :bigthumb

[smytty]

I'm pretty sure my car will be finished by then, so i will be there :bigthumbwhohoo good to hear:bigthumb

[redfirepearlgt]

Bone stock as well. 6 speed 3.31 gear Will be good to see these results against an auto and smittys 355 gear manual setup.

I may be a wee bit late Saturday morning...that is unless the wheels I ordered come in Thursday evening. I will be at Tire Discounters up the road getting them put on @ 8. Should be there NLT than 10.

[rtvickers]

This is really tempting. I would love to get my car on the dyno its been awhile. Can you do timing also?

[sean]

Please post some numbers on the cars. MInes stock except for removed mufflers..lol Should be similar to yours chad.

[exrider416]

whohoo good to hear:bigthumb

I think the vortech headunit is making a little unwanted bearing noise :( but it will be good to see where it is at for now.

[exrider416]

I think the vortech headunit is making a little unwanted bearing noise :( but it will be good to see where it is at for now.

But its only at idle. and i was just reading they're known for gear lash noise at idle?

[70mm_LS1_Eater]

Bone stock as well. 6 speed 3.31 gear Will be good to see these results against an auto and smittys 355 gear manual setup.

I may be a wee bit late Saturday morning...that is unless the wheels I ordered come in Thursday evening. I will be at Tire Discounters up the road getting them put on @ 8. Should be there NLT than 10.

Bring those GT500 wheels with you and I'll go ahead and take them off your hands. :lol::D

[plated]

Watch out for the light blue 3v coyote slayer on your way hone.been eatin the coyotes up,......

[redfirepearlgt]

Bring those GT500 wheels with you and I'll go ahead and take them off your hands. :lol::D

Cool thanks.

[redfirepearlgt]

Watch out for the light blue 3v coyote slayer on your way hone.been eatin the coyotes up,......

Get that car running again? Heard it developed a "hickup" one day after the turbo was in place. I'm missing redfire's power adder. Can't wait to possibly do another one. It was fun to catch unsuspecting people off guard with 507 RWHP.

[plated]

[QUOTE=redfirepearlgt;732365]Get that car running again? Heard it developed a "hickup" one day after the turbo was in place. I'm missing redfire's power adder. Can't wait to possibly do another one. It was fun to catch unsuspecting people off guard with 507 RWH


...its been back together for 7 months now
So far anyway.lets just say we found out what a stock motor will hold

[redfirepearlgt]

[QUOTE=redfirepearlgt;732365]Get that car running again? Heard it developed a "hickup" one day after the turbo was in place. I'm missing redfire's power adder. Can't wait to possibly do another one. It was fun to catch unsuspecting people off guard with 507 RWH


...its been back together for 7 months now
So far anyway.lets just say we found out what a stock motor will hold

So what did you find to be the magic number? Redfire was putting down 507RW/463T on the stock internals. Seemed to be fine with street tires, but instinct said not to put a set of Slicks on it and launch it @ 6K. Starting to miss that car.

[Maximus]

Please post some numbers on the cars. MInes stock except for removed mufflers..lol Should be similar to yours chad.

We will be Dynoing this stock, 2012 before we install a Procharger, SW Headers, Gauges etc etc. I should have a video up on Cincy Speed's FB page soon.

http://i775.photobucket.com/albums/yy39/CincySpeed/Shop%20stuff/DSC01728.jpg

[Maximus]

Try this link.....

https://www.facebook.com/photo.php?v=4226627818192&set=vb.147282994113&type=2&theater

[rtvickers]

I agree. Thats why its on a Saturday. :)

AF included.:bigthumb

Can you do timing with the pulls with a/f?

[Maximus]

Can you do timing with the pulls with a/f?

You mean, Load the Dyno and graph thru different MPH or RPMs? Yes, but not on this day. This is for a couple WOT pulls.:)

[rtvickers]

You mean, Load the Dyno and graph thru different MPH or RPMs? Yes, but not on this day. This is for a couple WOT pulls.:)

K sounds good, thanks

[sean]

Try this link.....

https://www.facebook.com/photo.php?v=4226627818192&set=vb.147282994113&type=2&theater

Link didn't work.

[exrider416]

Watch out for the light blue 3v coyote slayer on your way hone.been eatin the coyotes up,......

Good thing I'm headed toward the westside, I'd hate to end your streak ;-) lol . I tried to PM you on some paint questions and didn't know if your number was the same or not.

[plated]

Good thing I'm headed toward the westside, I'd hate to end your streak ;-) lol . I tried to PM you on some paint questions and didn't know if your number was the same or not.

You better trade that in for a new gt500 then i know the 11 gt500 wont keep up i raced one about 6 different times.i giv the gt cars a few cars out on me b4 reeling them in just for screwing with me on the street. But they giv me thumbs up aftrwords lol.most coyote guys traded there 3v in for the coyote car then pik on 3v cars well not mime lol not i race coyotes about evry other day one tries.its just funny thats all

[redfirepearlgt]

So Chris, what was the magic number?

[plated]

So Chris, what was the magic number?

Depends where i got my boostcontroller it will make 700 if i wanted it to but motor wont hold Comparing turbo to blower cars is like apples to oranges.turbo car will make a 100 ftlbs of tork then a blower car.ive road in alot of blown 3v cars they suck to me.ive had mine on 15 lbs b4 but u cant keep it straight im any gear

[exrider416]

You better trade that in for a new gt500 then i know the 11 gt500 wont keep up i raced one about 6 different times.i giv the gt cars a few cars out on me b4 reeling them in just for screwing with me on the street. But they giv me thumbs up aftrwords lol.most coyote guys traded there 3v in for the coyote car then pik on 3v cars well not mime lol not i race coyotes about evry other day one tries.its just funny thats all

Sounds pretty mean. raced a 11 gt500 6 different times? I think after i lost once i'd :bigthumb and roll on lol shoot me a PM, I think i might throw you some cash for your time if you would come check out this quarter i had repaired on my mustang before i accept the work. That's if you have the free time

[redfirepearlgt]

Depends where i got my boostcontroller it will make 700 if i wanted it to but motor wont hold Comparing turbo to blower cars is like apples to oranges.turbo car will make a 100 ftlbs of tork then a blower car.ive road in alot of blown 3v cars they suck to me.ive had mine on 15 lbs b4 but u cant keep it straight im any gear

awesome. was always told thathte stock 3v block was not reliable beyond about 450 RWHP/Torque. Would love to see it on the dyno Saturday. Take care.

[redfirepearlgt]

I'll bring the video camera and the tripod...........

[redfirepearlgt]

Less than 24 hours away!!!! See everyone there at 0930-1000!!!!

[smytty]

Less than 24 hours away!!!! See everyone there at 0930-1000!!!!
See ya bright and early.. Remind me tomm to let them know our cars need to be dynoed in 5th...

[Goober]

Somebody better post videos for my fat ass!

[redfirepearlgt]

Somebody better post videos for my fat ass!

You got it. I'm new at this moving picture thing so it may takea few days to edit and post.

[redfirepearlgt]

WIll be there NLT 10:00. Got home late from work this morning.

[Maximus]

7 Awesome Mustangs made the drive over.
Thanks for coming out!:bigthumb

Videos are on Cincy Speed's Facebook page.:)

[exrider416]

Had a great time. Good too meet a few more bangerz. Happy with my numbers too!

[firestang70]

Never realized my car was that loud. lol Thanks for the time Craig and crew, nice to meet some new faces.

[rtvickers]

I had a great time thanks Craig. It was good to meet you. It was good meeting fellow SBZ and putting some faces to names. Congrats to everyone and their numbers.

[smytty]

Yep was a goodtime, and nice to meet everyone...
Thanks again Cincy Speed

[redfirepearlgt]

Had a blast. Good to see everyone come out. Thanks Craig and Blake for letting us come in and do some dyno pulls.

[redfirepearlgt]

Video coming to media section soom. Waiting on Vimeo. It's rough but just began the video editing thing. Sorry for those I missed. Feel free to post Hp/T numbers with the video in the media section when I get it up.

[Goober]

Saw some vids on the Cincy Speed FB page, but I'm always down for more Coyote, especially on Vimeo!

[Gearhead]

Nice to put faces with names !! Thanks Smytty, Craig, & Cincy Speed for putting this together !! :bigthumb

[sean]

Was a very productive day at work but would have liked to come play. Thank you fort doing it and I'll make it out some day.

[70mm_LS1_Eater]

It was a fun day! The car made good power and there was a lot of cool cars out.

[exrider416]

Video coming to media section soom. Waiting on Vimeo. It's rough but just began the video editing thing. Sorry for those I missed. Feel free to post Hp/T numbers with the video in the media section when I get it up.

You were right about you thought the impeller was rubbing on my vortech. Looks like its hitting on 2 areas if you look at the pics. Possibly a casting issue? i think if it were a bearing that it would hit in random spots, not the same spots each time?

[redfirepearlgt]

You were right about you thought the impeller was rubbing on my vortech. Looks like its hitting on 2 areas if you look at the pics. Possibly a casting issue? i think if it were a bearing that it would hit in random spots, not the same spots each time?

Really hard to tell. There is clearly an issue here. I had a turbo blower on a CO2 laser (similar in design to a centri but electrically driven at much higher RPM) fail premature due to bearing and seal failures. A deep investigation on the cause was done. I have a copy for my records to protect me. What the exact cause was turned out inconclusive other than it was not from improper or neglected maintenance. The turbo blower was mounted wit hteh impeller shaft vertical, whereas the Vortech/Paxton is mounted horizontally. The rubbing is on the bottom in the photos. This could be because the impeller is sagging during idle and low RPM due to a failed bearing/seal, improper assembly or even a casting as you suggest. Either way it isn't right and Vortech/paxton needs to address it.

Whatever you do on this from here out...Doument,document,document.... DO NOT TAKE ANYONE'S WORD. Get EVERYTHING in writing...friend, family, or foe. Vortech/Paxton needs to step up to the plate on this and make it right. Make darn sure your ditributor does his/her job in this matter as well. They benefit from the sale of the item, they are also the link between you and the MFGR. Keep them in the loop and make them do what needs to be done to expedite this warranty process. Any involvement from anyone ...get it in writing. The days of handshakes and verbal promises are gone.

Would love to hear the results. After hearing yours run (even with the interference issue) I am impressed with the drive-ability and idle recovery. Would love to see Jon Lund (Ken B) perfect the tune so that email tuning does not have to be done on each and every package sold if that is possible for a simple SC bolt on with no other add ons.

[SN95N/A]

I will take a crack at the "coyote slayer" how ya been plated?