Bman
08-06-2012, 02:36 AM
85 coupe with 89 nose and int.
350 .040 over sbc with AFR heads aftermarket lightweight crank H beam rods J&E pistons 13.7 to 1 comp mech roller cam
Turbo 350 trans with 5000 converter TCI Outlaw shifter
Tube k member and a arms flaming river manual rack bump steer kit coil over kit up front with strange adj struts
Manual brakes
8.8 rear with 4.56 richmond gears 33 spline moser axles and spool anti roll bar tube upper and lower control arms adj rear shocks
8 point cage painted to match car new 5 point harness frame is tied
10 gallon alum cell holley pump and regulator number 8 line front to rear
New wiring through out switch panel mounted on cage msd digital 6 box blaster 2 coil mounted inside
Weld big and littles
1 3/4 stepped to 1 7/8 headers 3'' exhaust with spintech mufflers
New paint new smoothed firewall and inner finders weather stripping kit
13500 turn key or 8500 rolling if you want it set up for a ford I have a k member with no mounts I can swap out and knock a few bucks off
PM with any questions
For some reason I can't upload pics. PM me an e mail and I'll send them. There are pics in the project's and paint sections.
350 .040 over sbc with AFR heads aftermarket lightweight crank H beam rods J&E pistons 13.7 to 1 comp mech roller cam
Turbo 350 trans with 5000 converter TCI Outlaw shifter
Tube k member and a arms flaming river manual rack bump steer kit coil over kit up front with strange adj struts
Manual brakes
8.8 rear with 4.56 richmond gears 33 spline moser axles and spool anti roll bar tube upper and lower control arms adj rear shocks
8 point cage painted to match car new 5 point harness frame is tied
10 gallon alum cell holley pump and regulator number 8 line front to rear
New wiring through out switch panel mounted on cage msd digital 6 box blaster 2 coil mounted inside
Weld big and littles
1 3/4 stepped to 1 7/8 headers 3'' exhaust with spintech mufflers
New paint new smoothed firewall and inner finders weather stripping kit
13500 turn key or 8500 rolling if you want it set up for a ford I have a k member with no mounts I can swap out and knock a few bucks off
PM with any questions
For some reason I can't upload pics. PM me an e mail and I'll send them. There are pics in the project's and paint sections.