93 gt roller

[91lxnos]

93 GT
green/gray exterior black interior (except gray front seats) canbe died black
5 speed car all pedals there
white face guages
autometer shift lite with pills
power window/locks (all work)
frame ties (passenger side needs welded on)
bolt in (can be welded) 6pt roll bar with swing out door bars
aftermarket fiberglass hood
UPR tubular K-Member
UPR a-Arms
Coil overs up front
UPR caster/camber plates
Flaming river rack
Flaming river shaft
strange 10 way adj. struts
5 lug conversion front and back
4 wheel disc breaks
strange 10 way shocks on rear
axel tubes welded
UPR upper/lower controle arms
255 in tank pump
still have stock fuel rails but currently set up for after market rails
A9L computer and harness all there
comes with nice wheel and tires..Kumo up front look new, Nitto DR's in rear
frame rails in good shape no rust, solid.
Battery relocated to rear.

Bad.....
Needs a new front bumper cover
surface rust over rear fender wells from previous owner rolling them
paint peeling under drivers window molding
paint is faded on fender tops but still cleans up...Good from far...Far from good.
No rear seat.

looking for 3500.00
will throw on a set of Weld Pro Stars (fats and skinnys) 15x10x6.5 rears with MT ET Drags/fronts with nice rubber for 3800.00



will post more pics tonight
this car hooked with a 302/e-cam/TF heads and a little spray
car is one in avater.......

[91lxnos]

a few pics of car

[91lxnos]

just a few more

[jad0087]

this car is nice guys, i sold this to him

[91lxnos]

This is a previous post but I could not edit it
Need to sell to pay for wedding
I can always find another car.....LOL
I have added alot of stuff so read on


93 GT
green/gray exterior black interior (except gray front seats) can be died black real easy.
5 speed car all pedals there
white face guages (oil/temp/boost)
autometer shift lite with pills
power window/locks (all work)
frame ties (passenger side needs welded on)
bolt in (can be welded) 6pt roll bar with swing out door bars
aftermarket fiberglass hood
UPR tubular K-Member
UPR a-Arms
Coil overs up front
UPR caster/camber plates
Flaming river rack
Flaming river shaft
strange 10 way adj. struts
5 lug conversion front and back
4 wheel disc breaks
strange 10 way shocks on rear
axel tubes welded
UPR upper/lower controle arms
255 in tank pump
still have stock fuel rails but currently set up for after market rails
A9L computer and harness all there
comes with nice wheel and tires..Kumo up front look new, Nitto DR's in rear
frame rails in good shape no rust, solid.
Battery relocated to rear.

NEW ADDED!!!

MEXICAN BLOCK BORED AND CLEARENCED FOR 349
MAIN GIRDEL
AFTER MARKET OIL PAN (PRO FORM)
ARP MAIN STUDS
TRICK FLOW TWISTED WEDGE HEADS (currently disassembled for freshen up)
SOLID ROLLER SPRINGS
DOUG HERBERT SOLID ROLLER CAM
242/608??? (WILL CHECK EXACTLY)
TIE BAR SOLID ROLLER LIFTERS (CRANE)
PUSH RODS (TRICK FLOW) i believe
1.7 rockers
ALUM FAB VALVE COVERS
VIC JR INTAKE CONVERTED TO EFI
ELBOW
80MM TB
METER CAL FOR 42#
42# INJECTORS
BBK LONG TUBE HEADERS
H PIPE (not sure of muffelers)
t-5 tranny (little slugish going into 3rd sometimes) after market shifter
all assories for front ie; alt, h2o pump, ect....
MARCH ALT TENSION BRACKET
NX NITROUS KIT
EFI DIZZY (currently set for hyd cam will need to change drive gear for solid roller cam if thats what you run)

IM SURE IV'E MISSED BUNCH OF STUFF BUT ALL YOU NEED IS YOUR 349 ASSEMBLY AND YOU CAN GO

Bad.....
Needs a new front bumper cover
paint peeling over rear fender wells from previous owner rolling them
paint peeling under drivers window molding
paint is faded on fender tops but still cleans up...Good from far...Far from good.
No rear seat.


see previous post 93 gt roller for some pics

4,500.00

[91lxnos]

see new add (steal this 93gt and parts)

[blue5.8]

if you part out let me no i might want the suspension?

[91lxnos]

if you part out let me no i might want the suspension?

will do but I dont have space or time to part out myself right now.
Somebody buy this who does and will make alot more money in parts though.

[SCHMUCKINGHAM]

That intake looks super familiar!

[Goober]

What size are the TW heads?

[91lxnos]

That intake looks super familiar!

yep. lol its sweet

[91lxnos]

to the top

[91lxnos]

to the topppper!!!!

[91lxnos]

What size are the TW heads?

1.95 TW street heat...

[NUTTSGT]

PM sent . . . . . .

[91lxnos]

sale pending !!!!!!!!!!!!!!!

[NUTTSGT]

If the sale falls through, call the number in your PMs.

[91lxnos]

If the sale falls through, call the number in your PMs.

cool thanks

[jktruckin06]

Good as gone 8am tomorrow

[NXcoupe]

Yeah, it sold. Nice meeting you JKtruckin06! That's a story we'll be talking about for a while, Dougie you and me pushing that car around with your poor woman climbing out of it. great time!

[jktruckin06]

Good meeting both of you as well. It was interesting to say the least.