Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
OIl Pump Failure [Archive] - StangBangerz Forums

PDA

View Full Version : OIl Pump Failure



KB1
05-28-2012, 10:58 AM
Well the oil pump failed on the Volv8, twisted & broke the ARP oil pump drive shaft!!!
Facemelter71 & tore it down Saturday, the oil pump locked up:(.

Luckily there is no damage to the motor, when the light came on, I turned the engine off.

Should be back on the road this week.

First time I ever had a Melling pump fail, only a couple years old.

Ryan218
05-28-2012, 05:46 PM
Well the oil pump failed on the Volv8, twisted & broke the ARP oil pump drive shaft!!!
Facemelter71 & tore it down Saturday, the oil pump locked up:(.

Luckily there is no damage to the motor, when the light came on, I turned the engine off.

Should be back on the road this week.

First time I ever had a Melling pump fail, only a couple years old.

we had a melling pump fail in a 400 pontiac motor on the engine dyno. wiped the crank. melling was less then helpful on that one.

Jake
05-28-2012, 08:05 PM
are there any better choices than melling for oil pumps? melling is the only name I know of, and had planned on going with them.

Galaxie
05-28-2012, 11:30 PM
Dont buy a mellings from the parts chains they are seconds. I will only run Sealed Power and get them at Napa .

1987LXVert
06-10-2012, 06:35 PM
I've personally never had an issue with a melling

KB1
06-11-2012, 10:38 AM
I went back with a Melling & ARP driveshaft, just one those freak things that happen, it's all back together & running fine!!!!:bigthumb