5.0calypso93lx
04-03-2012, 03:45 PM
1) I have a set of GT40P heads that I was going to use before I found a good deal on a set of aluminum heads.
They are actual P heads with upgrade Crane springs on them. They were used with an F cam and I planned on running them with my F cam combo as well. The heads have not been milled but did have a few thousandths taken off to true them up. Could use a coat of paint as I stripped off the blue paint that was on them when I got the heads:
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_2482-1.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/538103_10150628550306847_736166846_9748119_3715401 15_n.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_2472.jpg
$250 FIRM picked up.
2) Steed 1.7 Pedestal Mount Rockers. I believe these were made by FRPP for Steeda but can't confirm that. I have everything that goes with these:
-Rockers themselves
-Two sets of 16 rocker stands, at two different heights (one is about .200" taller than the other set, may be missing one stand on the taller stands)
-16 5/16" through bolts
-Shims. I have .025", .030", and .060"
Some rockers have already been clearance for taller valve springs.
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_2484.jpg
$125 FIRM picked up.
Please call or text me at 513-315-6583. I can text more pics of anything you'd like to see more pics of.
They are actual P heads with upgrade Crane springs on them. They were used with an F cam and I planned on running them with my F cam combo as well. The heads have not been milled but did have a few thousandths taken off to true them up. Could use a coat of paint as I stripped off the blue paint that was on them when I got the heads:
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_2482-1.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/538103_10150628550306847_736166846_9748119_3715401 15_n.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_2472.jpg
$250 FIRM picked up.
2) Steed 1.7 Pedestal Mount Rockers. I believe these were made by FRPP for Steeda but can't confirm that. I have everything that goes with these:
-Rockers themselves
-Two sets of 16 rocker stands, at two different heights (one is about .200" taller than the other set, may be missing one stand on the taller stands)
-16 5/16" through bolts
-Shims. I have .025", .030", and .060"
Some rockers have already been clearance for taller valve springs.
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_2484.jpg
$125 FIRM picked up.
Please call or text me at 513-315-6583. I can text more pics of anything you'd like to see more pics of.