Combo questions

[fastnotch2002]

Picked up a 91 supercharged vert. Has a 306 with ported heads and ported stock intake, anderson blower cam and 19pd injectors pushing 5 pounds of boost.

Question I have is Id like to do a little more to the top end. Was thinking a set of AFR 165s, trackheat intake. My question is what injestors, MAF and tb should I go with? Was thinking about putting the 9pd pulley on it. Any better intakes then the track heat? THANKS GUYS!!!

[draggin50]

You ever thought about the Trick Flow Twisted Wedge heads? I think there is more room to grow later on down the road with those heads.

[fastnotch2002]

You ever thought about the Trick Flow Twisted Wedge heads? I think there is more room to grow later on down the road with those heads.


I did but dont really wanna go that big or have the pistons flycut, my last bossted vert was over 600rwhp, looking for a more streetable aroung 300-400hp.

[draggin50]

With those you can run the 2.02 valves with out flycutting the pistons up to a certain amount.

[fastnotch2002]

Wouldnt I have to worry about clearances tho?

[Gearhead]

If you're putting a pulley on it that will give you 9lbs of boost, I'd go with a much bigger injector than the 19's.....

[fastnotch2002]

If you're putting a pulley on it that will give you 9lbs of boost, I'd go with a much bigger injector than the 19's.....
Ya i agree, wasnt sure to go with 30's or 36's

[90fastgt]

i would go with at least 42s if it was me

[fastnotch2002]

i would go with at least 42s if it was me

never really liked the 42s....always herd they were hard to tune with? My old vert originally had that and I changed to 60s, that would be way more then id want for this car.