some polished parts i did

[FLAsn95]

i did these myself i thought they turned out pretty good, i will be doing my eaton soon. all i did was sand with a drill with 60 grit then 320 grit, then used a dremmel in all the grooves, then hit it with 2 diff buffing wheels

explorer intake

http://i76.photobucket.com/albums/j13/sn95fury/DSCN0099.jpg

stock fox body valve covers modded to fit sn95
http://i76.photobucket.com/albums/j13/sn95fury/DSCN0080.jpg
http://i76.photobucket.com/albums/j13/sn95fury/DSCN0078.jpg

all together, i also did the alt maf sensor throttle body and elbow
http://i76.photobucket.com/albums/j13/sn95fury/DSCN0111.jpg

[skenny19]

they looked good

[mad max]

Nice work man , very time consuming.

[mustangboy]

You should have cleared those so you don't have to polish them anymore.

[rtvickers]

^^^ What he said. They look great.

[Rick93coupe]

Looks great, good job!

[FLAsn95]

You should have cleared those so you don't have to polish them anymore.

that does not work like you would think, there is one product out there but the cost is very high. just throwing a clear over it will not stick so you have to leave it more brushed and it turns yellow

[mustangboy]

I powder coat over polished parts all the time and it works quite well:bigthumb Here are some of my own valve covers I did straight out of the box. They weren't polished to perfection by the factory but still turned out pretty good. I do commend you on the patience to polish all that by hand, it is a real pita.

http://farm8.staticflickr.com/7019/6518234143_2364dde3a7_b.jpg (http://www.flickr.com/photos/11756743@N02/6518234143/)
991 (http://www.flickr.com/photos/11756743@N02/6518234143/) by mustangboy429 (http://www.flickr.com/people/11756743@N02/), on Flickr

[FLAsn95]

Yea looks good but see what i mean if we put our valve covers side by side mine would look alot more shiny. Yours looks great but has that brushed look.

[mustangboy]

Thats more about how they came out of the box than the clear. They could have been hit with a buffer one more time to really make them pop, I just don't have a good buffing wheel.

[qwk93ta]

Those valve covers look great!!!

[87stangbbb]

that upper looks great...how much time do u have in it?

[FLAsn95]

About 3 hours. That included removing old paint

[87stangbbb]

thats not bad i thought you would say 20 hours or something crazy lol

[FLAsn95]

The upper is for sale too lol i am putting a eaton on top of the lower