edelbrock heads

[TONYT]

i got a shot to get a set of TEA edel.jr 225 cnc'd heads at what seems to be a goooood price.they have probe shaft mount rockers,nextec springs.

ive learned over time to get the input of you all in making some of my difficult choices,so what are some of oyur opinions on TEA and edel. heads.

the flow #'s on these are on par or better than afr205's and tfs205cnc

[TurboNG]

what are the spring specs and valve tran comp made of?

[TONYT]

nextec solid roller springs 700+ lift
ferrea 2.05 intake
ferrea 1.60exhaust
titanium locks,retainers
probe 1.6 shaft rockers
were on 408 n/a that made 554rwhp at 10.9.1

[2Fast4You]

Sounds like a set of good heads, just need to insure the price you are paying is on par and they are going to work for your aplication.

[TONYT]

they list for 2300 and are fresh and talked with mike at TEA and he says they will work gr8
just wasnt planning on running a solid roller,but dont want to breakup the setup

[2Fast4You]

You can always change the valve springs for your application now and if you decide to go w/ a solid roller you already have the components to do so.