PonymanfiveO
11-29-2011, 03:28 PM
Time to sell the old project car. Ive moved on to other interests and am looking to get rid of this pretty quick, but Id like to see it go to someone who will enjoy it and race the shit out of it. :bigthumb
The car is an '89 GT with 12pt. Rigid Race Cars cage NHRA certified to 8.50 Car is 100% rust free and has been extensively lightened.
Save yourself hundreds of hours of cutting, welding, and body work because this chassis is ready to put together!!!
Interior:
I have about 75% of the interior pieces. Missing a dash and headliner...maybe a few small pieces as well.
What I do have: 1 gutted steering column with Mark Williams steering wheel quick release, 2 Ultra-Shield aluminum seats with black covers, new Stroud window net with AJE quick release mount, 1 set Quarter panel interior pieces, 2 hatch interior panels, glove box, center console, door latch and manual window regulators, some body wiring harness, 1 set of Grey Manual door panels, 1 set of Grey Power door panels,
t, 2 Ford NOS upper window molding, 2 new door window belt-strip molding, new door hatch and sunroof weather strip. (I have more stuff in boxes)
Exterior:
Cervinis stalker front bumper cover, Cobra rear bumper cover (both painted tangelo pearl), LX tail lights, new VFN 2 inch pin on ultra light hood, fenders, doors and hatch have been lightened, 2 sets of ground effects plastic, 1 set is painted tangelo, 1 set of new Ford NOS ground effects retainer brackets and 1 set of used, miscellaneous extra window moldings, 3 sets of hatch back quarter glass, 2 sunroof glass, 1 hatch glass.
I also have extra paint materials. Should be enough to finish the paint job. All paint and materials are House of Kolor brand!
Suspension & Brakes:
1 new Jegs manual master cylinder kit (installed),1 set of 89 GT spindles, , new all-star line-lock, new roll of brake line and fittings, Jegs proportioning valve & brake light switch, 1 new Flaming River manual steering shaft assembly, UPR double adjustable anti-roll bar (installed), fully built 8.8 with 5.14 gear set (installed), C-clip eliminators, 31 spline Moser 5 lug axles, Aerospace rear brakes (missing calipers), 1 used 3.73 ring and pinion.
Bogart Force 5 - 5 lug wheel set 3.5x15 & 11x15 with 5.5" back spacing, 3 new boxes of Moroso rim screws part # 90100
Miscellaneous parts and stuff:
3 extended clutch forks, 5.0 alternator, 1 old style NOS 10 pound bottle (full), 1 new Rohe Racing mass air 5.0 conversion harness, 1 new Ford Racing Boss302 oil pump drive shaft, miscellaneous -6 and -8 steel braided hose and fittings, used master power cut off switch, miscellaneous 2 gauge wire, 1 outdated RCI harness. 1 used set of D&D caster camber plates, 1 used manual master cylinder, 1 new Strange 26 spline Billet slip yoke # U1669, 2 orange 5 gallon plastic fuel cans (have only had C10 in them).
I have more pics I can email to those seriously interested.
$2,600 priced to move all of it! If your not interested in the entire list, make me an offer on what you want.
https://lh6.googleusercontent.com/-qcPr5Aevjks/TtUvzIZBgVI/AAAAAAAAARU/B13VaiYuvJk/s800/Droid%2BX%2B276.jpg
https://lh3.googleusercontent.com/-SK7Lwi7OvL4/TtUv7mc8f9I/AAAAAAAAARc/qaqLSqCSJ5g/s800/Droid%2BX%2B283.jpg
https://lh6.googleusercontent.com/--Sg5DKrvwbA/TtUv7y35owI/AAAAAAAAARk/Qz-1tS6ByAY/s800/Droid%2BX%2B277.jpg
https://lh6.googleusercontent.com/-5MVAb1IDclA/TtUv--mCfQI/AAAAAAAAARs/bU7LywjyZtU/s800/Droid%2BX%2B278.jpg
https://lh6.googleusercontent.com/-9VoS1F5F9Eo/TtUwGJQPZaI/AAAAAAAAAR0/Dj7P2M24EDY/s800/Droid%2BX%2B279.jpg
https://lh3.googleusercontent.com/-Fk6wROTrZJ4/TtUwIz8farI/AAAAAAAAASE/KWDajvncRHc/s800/Droid%2BX%2B281.jpg
https://lh5.googleusercontent.com/-sIaNXf0IUj0/TtUwG_pAKLI/AAAAAAAAAR8/kodGw9j1wcc/s800/Droid%2BX%2B280.jpg
https://lh4.googleusercontent.com/-_yqQxQOr4AU/TtUwLreleMI/AAAAAAAAASM/gtVDa0GPdJo/s576/Droid%2BX%2B282.jpg
The car is an '89 GT with 12pt. Rigid Race Cars cage NHRA certified to 8.50 Car is 100% rust free and has been extensively lightened.
Save yourself hundreds of hours of cutting, welding, and body work because this chassis is ready to put together!!!
Interior:
I have about 75% of the interior pieces. Missing a dash and headliner...maybe a few small pieces as well.
What I do have: 1 gutted steering column with Mark Williams steering wheel quick release, 2 Ultra-Shield aluminum seats with black covers, new Stroud window net with AJE quick release mount, 1 set Quarter panel interior pieces, 2 hatch interior panels, glove box, center console, door latch and manual window regulators, some body wiring harness, 1 set of Grey Manual door panels, 1 set of Grey Power door panels,
t, 2 Ford NOS upper window molding, 2 new door window belt-strip molding, new door hatch and sunroof weather strip. (I have more stuff in boxes)
Exterior:
Cervinis stalker front bumper cover, Cobra rear bumper cover (both painted tangelo pearl), LX tail lights, new VFN 2 inch pin on ultra light hood, fenders, doors and hatch have been lightened, 2 sets of ground effects plastic, 1 set is painted tangelo, 1 set of new Ford NOS ground effects retainer brackets and 1 set of used, miscellaneous extra window moldings, 3 sets of hatch back quarter glass, 2 sunroof glass, 1 hatch glass.
I also have extra paint materials. Should be enough to finish the paint job. All paint and materials are House of Kolor brand!
Suspension & Brakes:
1 new Jegs manual master cylinder kit (installed),1 set of 89 GT spindles, , new all-star line-lock, new roll of brake line and fittings, Jegs proportioning valve & brake light switch, 1 new Flaming River manual steering shaft assembly, UPR double adjustable anti-roll bar (installed), fully built 8.8 with 5.14 gear set (installed), C-clip eliminators, 31 spline Moser 5 lug axles, Aerospace rear brakes (missing calipers), 1 used 3.73 ring and pinion.
Bogart Force 5 - 5 lug wheel set 3.5x15 & 11x15 with 5.5" back spacing, 3 new boxes of Moroso rim screws part # 90100
Miscellaneous parts and stuff:
3 extended clutch forks, 5.0 alternator, 1 old style NOS 10 pound bottle (full), 1 new Rohe Racing mass air 5.0 conversion harness, 1 new Ford Racing Boss302 oil pump drive shaft, miscellaneous -6 and -8 steel braided hose and fittings, used master power cut off switch, miscellaneous 2 gauge wire, 1 outdated RCI harness. 1 used set of D&D caster camber plates, 1 used manual master cylinder, 1 new Strange 26 spline Billet slip yoke # U1669, 2 orange 5 gallon plastic fuel cans (have only had C10 in them).
I have more pics I can email to those seriously interested.
$2,600 priced to move all of it! If your not interested in the entire list, make me an offer on what you want.
https://lh6.googleusercontent.com/-qcPr5Aevjks/TtUvzIZBgVI/AAAAAAAAARU/B13VaiYuvJk/s800/Droid%2BX%2B276.jpg
https://lh3.googleusercontent.com/-SK7Lwi7OvL4/TtUv7mc8f9I/AAAAAAAAARc/qaqLSqCSJ5g/s800/Droid%2BX%2B283.jpg
https://lh6.googleusercontent.com/--Sg5DKrvwbA/TtUv7y35owI/AAAAAAAAARk/Qz-1tS6ByAY/s800/Droid%2BX%2B277.jpg
https://lh6.googleusercontent.com/-5MVAb1IDclA/TtUv--mCfQI/AAAAAAAAARs/bU7LywjyZtU/s800/Droid%2BX%2B278.jpg
https://lh6.googleusercontent.com/-9VoS1F5F9Eo/TtUwGJQPZaI/AAAAAAAAAR0/Dj7P2M24EDY/s800/Droid%2BX%2B279.jpg
https://lh3.googleusercontent.com/-Fk6wROTrZJ4/TtUwIz8farI/AAAAAAAAASE/KWDajvncRHc/s800/Droid%2BX%2B281.jpg
https://lh5.googleusercontent.com/-sIaNXf0IUj0/TtUwG_pAKLI/AAAAAAAAAR8/kodGw9j1wcc/s800/Droid%2BX%2B280.jpg
https://lh4.googleusercontent.com/-_yqQxQOr4AU/TtUwLreleMI/AAAAAAAAASM/gtVDa0GPdJo/s576/Droid%2BX%2B282.jpg