In need of 302 bare block 0.40

[red srides]

......................................

[mustangboy]

Believe it or not I think I have one. I would suggest having it measures with a bore guage to be sure but if I remember right it was 40 over. I check when I get home to make sure I still have it

[mustangboy]

I do have the block but not sure exactly on the bore. Cant remember if its 30 or 40 over. It is also very dusty and has a very light coat of surface rust. I would say a good cleaning at the machine shop and a light hone and it would be good to go. If you are interested let me know. Btw if you are buying a block to fit a set of pistons you have at the very least you should take any block you buy to the machine shop and let them check the bore size and let them hone the cylinders to fit the piston you have.

[91lxnos]

I got a 302 mexican block thats .040 over and already notched for a stroker kit. All machine work is done except final hone to match your pistons.

[TurboNG]

And I have a 349 stroker kit for sale

[red srides]

got a 349 already and can u run 1 pices main seal on mexican block

[dedpedal]

I have a stock 95 shortblock I can part with. make me an offer.

[red srides]

got one .........