Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Interior Door Clip [Archive] - StangBangerz Forums
PDA

View Full Version : Interior Door Clip


chris91
11-12-2011, 01:16 AM
Okay on my 99's door panel the upper section of the arm rest has come loose. These clips I guess you could call them have broken free of the panel. They glue to the arm rest section and go through the panel and basically get plastic welded to the door panel. Anyone have any idea where I could find these pieces? Ive searched high and low with no luck.

http://i32.photobucket.com/albums/d31/blown94ls/2011-11-12001011.jpg
chris91
11-27-2011, 05:00 AM
Nobody knows? They hold the silver part on to the door panel in this pic.

http://i32.photobucket.com/albums/d31/blown94ls/panel.jpg
jktruckin06
11-27-2011, 09:19 AM
3m double sided stuff is pretty stout. Or gorilla glue? No idea on new...
chris91
11-27-2011, 10:07 AM
The panels don't touch enough of the door panel itself to glue it to them securely. I found a guy that epoxied carriage bolts to the Silver panel then just used nuts and washers on the door panel side. Thinking about trying it that way as everyone has problems with the clips loosening up over time.
jktruckin06
11-27-2011, 10:15 AM
I meant re gluing the clip if possible. Carriage bolts sound sturdy though. Good luck with it
chris91
11-27-2011, 10:29 AM
The end of the clip where they were melted is wasted. It takes 6 and four of them don't even have ends anymore. I used the nicest one for the pic. Lol
motox159
11-27-2011, 05:55 PM
You might be able to find those in the HELP section at advance auto. Think other places have them too but not really sure.
chris91
11-27-2011, 06:16 PM
Ill have to check that out. Thx!