View Full Version : 10.5W on a 14” wheel
Centrifuge
09-14-2011, 12:58 PM
I have a 15x14” wide wheel with 16 screws (front and back side of rim), I am wanting to put a set of 10.5W x 28 on it, will I be able to get the bead to seat or is this a disaster in the making?
Jeff88coupe
09-14-2011, 02:59 PM
I'd ask this over on a board like NMRA or yellow bullet were there are 10.5 outlaw racers. I would think you might be pushing a 28" to fit and work....probably would work with a set of 29.5 or 30x10.5w's alot better.
2Fast4You
09-15-2011, 10:14 AM
I would say that your best bet would be to stick with a 10" wheel if you can go that route.
dsmawd350
09-15-2011, 10:55 AM
you can definately put it on a 12''
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.