1987 blk/blk coupe

[blown96cobra]

87 blk/blk coupe. Roller 351w, Holley systemax heads, x303 cam, crane gold 1.6 roller rockers, victor jr intake, Holley 750hp, flowtech longtubes, Mac 3in pro chamber, 3.73 gear, 31spline axles with long studs, jegs upper and lower tubular control arms(adjustable), koni rear shocks, 12 gallon fuel cell, Holley blue pump, jegs brand 95gph pump (for nitrous), braided line from back to front, front coil overs(not sure of brand),autometer oil press, water temp and nitrous press gauge. Tko 2 with hurst shifter and upr pistol grip, centerforce clutch, nos wet kit, bottle heater, blanket and 2 newer(bright blue) nitrous bottles.

The car has all black interior however some of the panels have been painted, it's very hard to tell but I'm Just being honest. The seats are great with no rips tears or lean, I just put a 6 in ho fibertrendz hood on it with new hood pins. The paint on the car is good and shines up great. It also has weld pro stars with 26.10.15 et drags and 165 r15 fronts. I ran the car yesterday at an 1/8 mi
track and it went 7.41 @ 97 with no timing and spinning some 1.79 60ft

I'm asking 7500$ and would do some trading on a nice coupe, fox gt, or new edge that I can dd. Call or txt me at 7409416497 if your interested.

[blown96cobra]

Forgot to add it has msd pro billet dist and msd 6al.

[sean]

heres somepics. Love that car

[sean]

found another pic

[mad max]

Thats a good looking coupe. Glws

[blown96cobra]

ttt........

[blown96cobra]

Bump....I figured out that the throttle was not opening all the way so it's a good bit faster than when I took it to the track id say it will run 10.70s fairly easy on the nitrous so.... 6000$ firm or would take a stockish fox gt or coupe and $

[dawsin94cobra]

i got my stock one and like 20 bucksss???? lol bump for ya bud

[Kevin1989]

Saw this car last night kinda make a dry run, and break loose into 3rd on the motor. runs damn good and sounds awesome!

[blown96cobra]

Yea it still had the nitrous tune on it with no timing, it makes some torque for sure.

[INSANEBA]

Nice light on that time slip! Even nicer car lol

[blown96cobra]

Bump.....put a new set of lloyds floormats in it today, spent 2.5 hrs on it with the buffer and about an hour on the wheels with the powerball. It's looking pretty good.

[blown96cobra]

Deal pending.

[sean]

Trade deal? What are you getting

[blown96cobra]

2000 GT with bolt ons and IRS. I'll probably do a termi swap in it if I keep it.

[700hp04mystic]

hope you got plenty of cash.

[sean]

Sounds fun

[blown96cobra]

Notice the "if I keep it" in there.

[chris91]

Yeah, he wont keep it. Me, you, and Sean need to start a club. hah

[sean]

Lol... Ahhhh mines not for sale.

[chris91]

You just got it. I predict sometime this winter you'll get the itch. Haha

[blown96cobra]

Sick of stupidity and lowballers Offering me 3500 without even looking at it So I'm going to part it out now. Call or txt me with what u want. I'll pull parts as there paid for or a non refundable deposit is given.

Roller -$3000 with prostars, black front seats, all gauges,tach all the suspension parts.
Motor complete carb to pan-$2000Obo
Tremec 3550 with hurst shifter $650.
6al, pro billet dist, msd coil - $370
Fuel cell, both pumps and -8line/-6line 225$
Nitrous kit with both bottles, heater and blanket 300$

[blown96cobra]

Forgot to add the exhaust.

Flowtech longtubes $80
2.5 in Hpipe 100$
3in Mac catback with 3in tail pipes(dinged to clear a 10in tire) 175$.

[Jrcmutang]

can you please give me details on your holley carb if you decide to part that engine out?

[blown96cobra]

can you please give me details on your holley carb if you decide to part that engine out?

The Holley that's on the motor now is the one thing that's not for sale.

[iceman1234t]

Is the 3550 a 10 spline input shaft?

[blown96cobra]

I'm not sure. When i bought the car I was told it was a tko600 then I got under it and looked at the tag and found out it was a 3550. The tranny is pending.

[blown96cobra]

[QUOTE=blown96cobra;675678]I'm not sure. When i bought the car I was told it was a tko600 then I got under it and looked at the tag and found out it was a 3550. The tranny is pending to jad0087

[blown96cobra]

Motor and tranny are pulled and ready to go. There's a billet steel 28oz flywheel too for 100$ and a Centerforce DFX with alot of life left for 125$. The 3550 does have a 10spline input shaft.

[blown96cobra]

Nitrous kit, msd 6al, msd dizzy all sold

still have everything else. :D

[ryan]

hey josh, i need my timing light back when is a good time to meet up? i need to time my brothers truck

[blown96cobra]

Oops i thought it was bretts

[blown96cobra]

Motor, headers are sold. Still have the roller, 3550, fuel system, hpipe, and catback.

[Flaming87lx]

Motor, headers are sold. Still have the roller, 3550, fuel system, hpipe, and catback.

Are you by chance interested in a big snap on box?

[blown96cobra]

I've got nowhere to put it Troy as much as I'd like to have it.

[Flaming87lx]

I've got nowhere to put it Troy as much as I'd like to have it.

no problem man, hope your luck changes cause looks like a great car

[blown96cobra]

Thanks troy Im gonna give the roller about another week to sell then I'm gonna just drop in a 302 with pheads and make a fun driver out of it. I can transfer all the good suspension parts and wheels over to my turbo car if I ever see it again.

[sean]

there ya go. I told you you should make it a daily any way.

[blown96cobra]

I got everything to put it back together less a distributor, msd box. If Walter doesn't buy the roller it's getting a forged low mileage 302, ported pheads with tfs springs, b303 cam, longtubes, performer intake,t5 from a v6 car and a big shot of giggle gas for those pesky ls1 owners.

[sean]

word. Just do it

[blown96cobra]

Mods plz delete. Roller is sold.

[sean]

Damn. How you do on the total sale?

[blown96cobra]

Alot more than 3500. Close to 2x that and I've still got a motor, 3550,aluminum radiator+fan, hpipe and catback. I'd say I'll be in the 7500-8000 range by the time I'm all done.

[chris91]

Congratz!! Hope you have something wild up your sleeve next!

[blown96cobra]

Nah I'm gonna take a few steps back and just finish up the turbo lx before next year hopefully.

[chris91]

My cars twin, forgot you had that one. Im sure itll be beastly when youre finished.

[sean]

What would that 3550 be like in my car? I like my lintech but miss the stick...

[blown96cobra]

It would work out fine if u like ripping gears. Hell I'd rather have the automatic. I'll still trade if u want and I'll help do the swap.

[sean]

I think it would pull better at higher speeds and be a bit quicker on the lower end. Do you have everything I need?

[blown96cobra]

Everything but a flywheel which I can get.

[sean]

We will have to talk about this. I wouldnt mind having a stick again and thats a pretty solid tranny. Everything work the way it should? Short shift, grabby clutch and a light weight flywheel would be good for my set up I think.

[blown96cobra]

Yea it's all fine. I'd leave the auto in it if u plan to add boost. 5pds suck with a turbo unless your purely wanting it for fun.

[sean]

I really plan on the turbo. Maybe in place of another bike this spring. Your prob right. When I pop it through the gears is a quick shifting mofo.

[blown96cobra]

If leave it be. It hurts for me to say that as bad as I want that tranny.

[sean]

I know it does. Thats why i consider you a friend... lol always got my back. You price that jacket yet?

[blown96cobra]

The 5spd will be more fun tho and I know thats what is more important to you.

[blown96cobra]

No I'm going up tomm I've been pretty busy the last few days