Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Comp Cams Hyd. Roller Cam [Archive] - StangBangerz Forums
PDA

View Full Version : Comp Cams Hyd. Roller Cam


Kwik92GT
08-23-2011, 03:42 PM
SBF Comp Cams hydro roller cam. Used, but is in very good condition. Had this in my '89lx and no longer need.

$100

SPECS

CLICK HERE (http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=1056&sb=2&AspxAutoDetectCookieSupport=1)
MFIELD
08-23-2011, 07:44 PM
Did you have any PTV clearance issues? Stock pistons?
Kwik92GT
08-23-2011, 08:07 PM
Did you have any PTV clearance issues? Stock pistons?

I'm thinking it would be pretty close but honestly not sure. Used this with aftermarket pistons, so it had no issues in that app of course. Comp Cams may have a better idea if it'd work with a stock piston.
MFIELD
08-23-2011, 08:43 PM
I'll do some checking, I am going to an Explorer motor so I hope this will work for me.
Kwik92GT
08-23-2011, 09:41 PM
I'll do some checking, I am going to an Explorer motor so I hope this will work for me.

Cool, if I have some extra time tomorrow, I'll try and do some checking about it too. Thanks for interest.
jack90gt
08-23-2011, 09:52 PM
I ran a x-303 cam on a stock piston and it cleared but as everyone else will tell ya always check it to make sure
cobra429boss
08-28-2011, 01:50 AM
Does it have a nasty idle
Kwik92GT
08-29-2011, 07:52 PM
Does it have a nasty idle

Not really, you could definitely tell it was there but it wasn't anything I'd consider "choppy". I had a 347 so it'd probably be totally different in like a 306 or something like that.
MFIELD
08-31-2011, 01:06 PM
Doesnt look like this will work for me, thanks anyway. GLWS
Kwik92GT
09-01-2011, 03:28 AM
Doesnt look like this will work for me, thanks anyway. GLWS

Thanks for the interest.