daul fans

[TONYT]

these seem to work gr8 on keeping a mod'd fox cool under pressure,they are from a ford contour,
75.00 ea or trade for parts i might need

[Pitbull1052]

I run this same fan set up and they work fantastic..... I'm not positive but I think the last article I read on these they are the highest flowing fans you can get.... GLWS

[TONYT]

no better endorsment than some one who's been there done that

thanx for the plug

[Pitbull1052]

no doubt...........

[TONYT]

would entertain offers on these fans they got to go in the way

[Pitbull1052]

to give anyone an idea..... the car i drive is a 347 with a 3 core and these fans I can sit in traffic for an hour and do about once a week and the car never gets over 155....... at the track I saw about 4 other cars running these same fans..... Tony if you don't move em i'd sit on them for real someone will need them and they are getting pretty hard to find at the yards anymore........

[chad393na]

Hey Tony im interested, would you happen to know how thick this setup is?

[5.0calypso93lx]

Hey Tony im interested, would you happen to know how thick this setup is?

They're one of the thinner fan setups. Much thinner than the stock or Mark 8 setups.

[TONYT]

i just might have to sit on em,had 4 and theseare my last 2

[Carl]

What's the width on these? Not sure if they are too wide for a 4 cyl radiator.

[TONYT]

i got em stored in the back of alt of other stuff,,but i'd say they are about 27-28in long by 2.5 3 in deep

[superstangOH]

If im not mistaken there almost identical as stock v-8 radiator. All i had to do was cut off the stock brackets to the fan and mount it straight on.

[COOP]

What kind of parts are you looking for?