roller rockers and studs

[2000GT]

3/8 1.7 and 1.6 trick flow roller rockers and trick flow studs

250 OBO

here link to them with a shity pic
http://cincinnati.craigslist.org/pts/2324593757.html

[2000GT]

ttt

make a offer.

[2000GT]

Bump.

Someone make a offer I need front 5 lug swap stuff for fox

Will trade for front 5 lug stuff

[2000GT]

someone make a offer

i need to get things for my coupe!!!!!


here the pic i dont have pic of studs but theyre new still in package




http://i672.photobucket.com/albums/vv84/jll92987/trickflowrollerrockers.jpg

[facemelter71]

what swap parts you after?

[2000GT]

Front stuff to swap to 5 lug. I already swapped the rear

[facemelter71]

Front stuff like Lincoln rotors and spindle's?

[2000GT]

Front stuff like Lincoln rotors and spindle's?

like any thing so i can just bolt 5 lug wheels up. i have all stock 4 lug stuff up front now. so i need everything to swap it out and bolt up 5 lug wheels

[2000GT]

TTT

Trade for front 5 lugs swap stuff, or set of 17 tires???

[facemelter71]

Ok,ive got front lincoln rotors,5liter spindles and a pair or 01 gt 17 inch rims.An interest? And maybe a pair of tubed front control arms.

[2000GT]

Would I have to get lincoln calipers or can my stock ones?

Dont need rims just need set of tires

Maybe be interested in arms

[facemelter71]

I dont think you need Lincoln calipers,would it help to have them,YES. They are a smigde bigger than factory Fox calipers. But not by much. I dont know if I have any tires. My brother ran me dry of 245-45-17's. I had about 6 tires total,all the same. But he got a flat every month.
Ill check,I might have the calipers anyway,if I do,they will go with it.

[2000GT]

Ok cool let me know. But if they work with stock caliperd and pads im Interested

[facemelter71]

As far as I know,they should Slide onto the spindles and bolts right on.I dont think the rotors are any larger in diameter,just the caliper piston on the lincoln's was a few MM's larger in diameter.

Just checked,the rotors are the same diameter,just 5 lug.

[Pitbull1052]

I've heard I don't know for sure as I have sn spindles but I've heard that some 5 lug rims won't fit or you'll have the cover for the bearings sticking way out......... not trying to stop a sale or anything........

[2000GT]

I've heard I don't know for sure as I have sn spindles but I've heard that some 5 lug rims won't fit or you'll have the cover for the bearings sticking way out......... not trying to stop a sale or anything........


i'll have to check that out. thanks man

[facemelter71]

I can check on that tonight when I get home. I have the rotors and a set of 5 lug rims from an 01 gt out there. Ill Mock them up and see what happens.

[2000GT]

I can check on that tonight when I get home. I have the rotors and a set of 5 star ponies out there. Ill Mock them up and see what happens.

i can bring one of my rims with me if we meet up and check see if it clears!

[facemelter71]

Got this info from some where on the net.

**Important note here! The SVO/Lincoln front rotors will NOT work with the Ford '98 & '99+ Cobra, Y2K Cobra R wheels, and '97+ GT 17" wheels. Most of the wheels will mount up ('98 cobra and the Bullitt wheels will not), but you will not be able to mount the center cap due to the larger dust cap on the rotor. To run these wheels, you need to convert over to the SN95 front brakes (this includes spindles, rotors, hubs and calipers). Alternatively you can use a wheel spacer, but it is not recommended. The Lincoln/SVO rotors will work for the' 95 Cobra R wheel, 16" SN95 Pony wheel, and '99+ 15" & 16" wheel since they have a different center design and cap. If the center of the wheel is recessed, the Lincoln/SVO dust rotor will most likely be to large for the center cap of the wheel.

[facemelter71]

At the top,your ad says 1.7 and 1.6? Do you have 2 complete sets?

[2000GT]

no just one set the guy i got them off of bought them from trick flow like that. you run the 1.7 on the exh. side and the 1.6 on the int. side. the trick flow part number for them is 51400512

[2000GT]

i emailed Summit and they said ...........

In most applications the 1.7 ratio will go to the exhaust and the 1.6 for the intake. If you have any further questions please call our tech department at 330-630-0240 M-F 9AM-9PM

Thanks,

Summit Racing Sales

[facemelter71]

Oh,sorry man. I need all 1.6 rockers. Ive got COMP cams cutting me a custom grind cam for 1.6 rockers.

My bad,I read your ad wrong.

[2000GT]

Oh,sorry man. I need all 1.6 rockers. Ive got COMP cams cutting me a custom grind cam for 1.6 rockers.

ok thats cool :bigthumb

wat would you be looking to get out of the 5 lug stuff? if they fit with my wheels of corse

[facemelter71]

As long as they fit with your rims,Im not sure. Let me get home and check these things out. They have been in boxes since I got them. Ill have them here tomorrow with me,im talking with KB1 to see if we can work some thing out so we dont have to drive to the other end of the earth.
Ill keep you posted,I got your number in the pm.

[2000GT]

TTT

make me a offer

[2000GT]

$150.00 obo

[2000GT]

125 ??????

[2000GT]

to the top

make a offer

[2000GT]

Sold!!!!!!!