prediction on my car?

[SN95N/A]

Well I have a 96gt that my brother has built for me I know he's the sh*t lol,well here the thing its a 96 motor with masterpower t70 turbo, sct blow thru maf,42lb injectors,has qa1 k member,255 fuel pump,if I can keep this thing together lol I was wondering if I could get a rough guess on dyno #'s and quarter mile time.car will be on 9lbs boost.

[Walter]

What trans?

[SN95N/A]

T-45..one other thing this is my 1st turbo car really got the idea when andy and I went and picked ur car up from ridgid race cars if anyone has any input on what I should do to car next all input very well appreciated.

[Blackout]

i would say 13.0

[SN95N/A]

Damn time to sell it.bak to the 5.0 lol I ran that with h/c/I 5.0

[Blackout]

well the trans will probably explode. Your heads and intake are restrictive as hell. in all honesty you probably be able to run som 12.30's. its just hard with those cars

[SN95N/A]

See that's wat I wanted input on what's goin to help me out cause this my 1st turbo setup car

[mustangboy]

I'm gonna guess 325 to the tires

[SN95N/A]

Thanks I need an 01 or 02 motor

[1992MustangDW]

if that thing puts down 325 on 9 pounds. 373 tuner. inj. mass. throttle body. i will blow it up. you have an 01 gt motor in the garage. i would say trade it and get back into a fox. pretty much all stock ran 12.90

didn't blake make right around 400 with the same set up

[1992MustangDW]

id say 380 or more and low 12 with me in it. you are known for 3rd gear shatter lol

[bobtsgt]

when I did my first set up like that it was around the 360 mark on 9lbs. Just remember boost is a restriction number. So 9lbs on a stock motor is not the same as a built motor that flows more.

[SN95N/A]

Oh you just had to bring up the 3rd gear story!:)....that's wat I wanna do get a clean foxbody for it.

[HawksWR37]

i tried 9lbs of turbo boost on my stock bottom end 04 and shattered a connecting rod and put a piston into another cylinder. at 6 lbs mine made 375ish on a stock bottom end pi motor. if it is a stock bottom end i would not even try to get 9lbs.

[SN95N/A]

I want a nice foxbody car I've made up my mind will be posting up pics after car is tuned and I get bak in town.

[Jake]

I want a nice foxbody car I've made up my mind will be posting up pics after car is tuned and I get bak in town.

so is this a for sale thread now? lol.

[SN95N/A]

No lol ima make a new thread haha im a truck driver tho so I gotta get home and get some pics

[boostanggt]

When that kit was on my car, it made 375/420 on 5 lbs. And I went 11.52 @ 118 on stock suspension :cool1:

[SN95N/A]

Jeezle lol

[2000GT]

That make u want to keep it now? Lol

[cobraman302]

Im goin with high 15's....ahhh just messing with ya man. Drive it like you stole it and pull some mid 12's with a good launch. Don't miss a shift and the tranny should be good. I have a stock t45 in my car and it held 550rwhp and 10.9X's and slicks. I plan to put close to 600rwhp through it now with upgraded 01 cobra internals. Let me know when you get a chance to run it.

[SN95N/A]

Haha high 15's the truck does better than that lol I need to find me a cobra motor decent price,the tranny issue im thinkin about puttin this eaton fuller 13 speed behind it ha jus kiddin