What did you do to your Stang today...

[93snake]

Ok just thinking about a thread that maybe everyone , newbie or old timer , could post in and enjoy :bigthumb

What I did to my stang today.... for no real reason decided that I wanted to open the trunk and see how many cobwebs were in there. Ended up checking out my fuel cell and battery box. (time for a new one :D ) Decided to put her back on the gound only to find out one of the drag radials has gone flat Quick search and found a nail, just going to order a new set. Also ended up making myself a list of a few parts that need updating (or that I just want to change out). Not a whole lot but enough to make me want spring/summer to get here soon.

[2007ShelbyCobra]

I drove mine to work, then was like wtf.... when we got a snow flurry

[evil8]

Rear axle seal in the Vette. I really dislike gear oil.

[Buckeye]

parked behind it in the drive way and thought man I need to get busy

[mustanger]

I just keep walking pass mine shaking my head :(

[CNTLOSE]

Just took off the lower Explorer intake to have RIXXX93GT drill and tap it for sensor in the 5th runner....Oh and removed said sensor from the original motor.

[85_SS_302_Coupe]

Just watched an old Tristate video this morning...that's about it.

[Rich]

Getting ready to go out and work on some wiring....

[Evil_Capri]

Plan on running the Mach in the Leprechaun Run 5 Road Rally today.

[TexPace79]

Put gas in the Mach 1, nothing like $3.85 for premium. Although I am always excited to calculate MPG and consistently get 22+ MPG even with freeway and some "spirit" street driving.

[aaron92fox]

getting ready to go out and put my intake on. switching to the explorer intake and fixing a exhaust leak thats been driving me nuts for the last 3weeks.

[firestang70]

Changed the oil in mine. Got my tuner in the mail and flashed the tune and....It stumbled and ran like crap. Hopefully the tuner gets it figured out.

[blown96cobra]

Im in the middle of a head swap on my track car, switching from gt40p heads and stock rockers to tfs 170cc heads and 1.72 roller rockers and doing a little porting to the cobra lower. I drive my 01 GT daily and it got a full tank of premium at 3.79 per gallon and bath/quik wax.

[facemelter71]

Walked past it this morning on my way to the wifes car to leave for work. It was asleep under the car cover,so I kicked it in the rear bumper as I walked past.

It will be leaving my driveway later today to head to Oxford so that I can pull the trans and swap in another one that I have been building. This will be my first AOD build that I have done.

After the trans swap it is getting sanded down. Ill drive it for a bit,then it heads to a friend of mine to hang some quarters on it.

[PKFIRE]

Pulled it back 30 ft to get to something in the garage. So far I've driven it under 30 miles this year.

[Kwik92GT]

Put dynamite under mine for about the 5th time, keep putting the blasting caps away so nothing to note. :D

Working on wiring. :rolleyes:

[91boost]

Unloading mine off the trailer to look at it and wish i had the time to finish it to paint it, then pushing it back on and bringing in another paint job.

[Maximus]

Walked past it and noticed I have A LOT OF SHIT TO DO!! :lol:

Called Dave and got directions to look at his Coupe for sale.:bigthumb

[Bluecrew07]

Drove it and realized that i need a tune bad lol

[Blkcobra01]

Nothing today cold, wanting to wax the 92 and call insurance and get full coverage back on it instead of fire and theft, so I can get it out hoping it warms back up soon, then wondering what is causing my check engine light in the cobra.

[GREAZY]

Looked at the 98 and thought " I need to drive this thing" and then looked at the 82 and thought " I need to work on this thing".

[mustangkuhn90lx]

i'm putting a explorer intake on my car i was wondering does it need that senior drilled in the number five runer i heard yes you need it and from others that you don't please let me know something

[MFIELD]

Getting ready to go out and work on some wiring....

And dash removal:flipoff:

[MFIELD]

I accually picked up all my internals and block from Steve Barker and am going to start cleaning to get ready for reassembly. I picked up a few small things to make that easier and also a new electric water pump. I am shooting to be running by the end of April.

[Stangman]

I drove my '94. Lol

[JIMS SVT]

I pushed my farther back in the garage then swept the floor lol.

[mustangboy]

Havn't seen it for a while, I guess I should go down to Red9 and at least clean the dust off of it.

[Jeff88coupe]

Um...walked past mine walking threw the garage. Planning on working on it some tomorrow before the UK game.

[raisinjack]

getting it ready for an auto to 6 speed swap!

[Rick93coupe]

Bought more parts for it. I can't wrench for another week or so.

[Kwik92GT]

Bought more parts for it. I can't wrench for another week or so.



http://i76.photobucket.com/albums/j23/Kwik92GT/suck-it-up-cupcake1.jpg

[CNTLOSE]

i'm putting a explorer intake on my car i was wondering does it need that senior drilled in the number five runer i heard yes you need it and from others that you don't please let me know something

I was told you do and figured it is there for a reason so I will stick with it. I was lucky in that one of the two Explorer intakes I have had the place for it to be easily done. I did hear some people ad it somewhere in the intake tubing so you might want to look into that.

[Rick93coupe]

http://i76.photobucket.com/albums/j23/Kwik92GT/suck-it-up-cupcake1.jpg

Bored as shit! :cool2:

[beefcake]

added a boss 302 intake! (yesterday)

picked up a tow vehilce today

[bronzeLX]

Traded for some parts for the 83GT, was going to weld some more on it but I really hate the cold, went back in the house!

[Kevin1989]

put on my new shift handle... pretended to hit some gears with it... still need to measure pushrods and put it back together :mad:

[Rick93coupe]

put on my new shift handle... pretended to hit some gears with it... still need to measure pushrods and put it back together :mad:

LOL, when I finished installing my shifter I did a linelock 3rd gear burnout, staged and made a full pass. All without leaving the garage!:lol: Sure I felt like I was 12 but it was just me in the garage and when I was done I laughed for 2 min straight. :bigthumb

[93mustang]

loko at it everytime i go out in the garage and think to myself "damn this thing needs a bath." has about a year and a half of dust. But i did drive it yesterday, runnin good!!!

[Kevin1989]

LOL, when I finished installing my shifter I did a linelock 3rd gear burnout, staged and made a full pass. All without leaving the garage!:lol: Sure I felt like I was 12 but it was just me in the garage and when I was done I laughed for 2 min straight. :bigthumb

i did a few first through 4th pulls but it was spinning to bad:D