WTB Camshaft

[NXcoupe]

Looking for a cam in the stage 2 TFS range. What have you got? Need one this weekend. Thanks!

[blown96cobra]

mike theres a bunch of tfs 2 cams on corral cheap, but i dont know if you would get one by this weekend.

[Steves LX]

PM sent

[Rich]

Mike,

I have a NX274HR, brand new, never ran. Billet core.

$150

http://www.summitracing.com/parts/CCA-35-556-8/

Hydraulic roller tappet
Basic Operating RPM Range 2,200-6,200
Intake Duration at 050 inch Lift 224
Exhaust Duration at 050 inch Lift 236
Duration at 050 inch Lift 224 int./236 exh.
Advertised Intake Duration 274
Advertised Exhaust Duration 286
Advertised Duration 274 int./286 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.555 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.570 in.
Valve Lift with Factory Rocker Arm Ratio 0.555 int./0.570 exh.
Lobe Separation (degrees) 114
Computer-Controlled Compatible No
Grind Number FW NX274HR-14

[NXcoupe]

mike theres a bunch of tfs 2 cams on corral cheap, but i dont know if you would get one by this weekend.

I searched today and there weren't any on there.

[NXcoupe]

Rich, if the lsa was around 112 or 110, I would be all over that cam. Steve, I'll let you know, just don't want to spend that much right now. But desperation could set in and I might want it. lol.

[93hulk]

Mike,

I have a NX274HR, brand new, never ran. Billet core.

$150

http://www.summitracing.com/parts/CCA-35-556-8/

Hydraulic roller tappet
Basic Operating RPM Range 2,200-6,200
Intake Duration at 050 inch Lift 224
Exhaust Duration at 050 inch Lift 236
Duration at 050 inch Lift 224 int./236 exh.
Advertised Intake Duration 274
Advertised Exhaust Duration 286
Advertised Duration 274 int./286 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.555 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.570 in.
Valve Lift with Factory Rocker Arm Ratio 0.555 int./0.570 exh.
Lobe Separation (degrees) 114
Computer-Controlled Compatible No
Grind Number FW NX274HR-14




That would be a pretty good turbo cam Rich. ;)

[INSANEBA]

Good luck Mike, TFS cams are getting hard to find used. I'm lookin for a stg 1 myself right now...

[INSANEBA]

Hey, Pm sent Mike! Wouldnt be tomorow but I did find one lol...

[93snake]

I am sure you already found one but if not Mike, I have one low miles $125

[NXcoupe]

I am sure you already found one but if not Mike, I have one low miles $125

Sorry, already committed to steve to get his cam from him. I appreciate it tho!