Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Back brake question!! [Archive] - StangBangerz Forums
PDA

View Full Version : Back brake question!!


lxenvy
02-14-2011, 07:20 PM
Ok so i been swapping parts on my car and i go to hook up the back brake line and there is nothing to hook it into. The line that comes from the rear end (the rubber hose one) i have nothing to adapt it to?? I need something to hook the rubber line into the metal line coming from the master. Any links to where i can get such a thing would be great! Thx
Stangman
02-14-2011, 09:10 PM
Are you doing an 8.8 swap into a 4cyl. Car?

If so, you need the metal bracket that pop rivets to the floor with the adapter fitting on it that both lines screw into. You can get one off ANY 86-95 v8 car with an 8.8.
lxenvy
02-14-2011, 11:25 PM
Thank u sir. And yes i am doin 8.8 swap
Stangman
02-14-2011, 11:35 PM
no prob, your car will have 2 holes where the bracket will be pop riveted. The brake line will run from the drivers side where the bracket mounts, to the passenger side, up against the floor over the pinion of the axle. then follow the same route the original 4cyl line goes.
lxenvy
02-15-2011, 01:11 AM
no prob, your car will have 2 holes where the bracket will be pop riveted. The brake line will run from the drivers side where the bracket mounts, to the passenger side, up against the floor over the pinion of the axle. then follow the same route the original 4cyl line goes.

:bigthumb