Winter builds.

[excopcar]

What kind of winter builds you got going on?Post it here.Ford Power.

[evil8]

New fuel system. I was dropping down to 35ish in boost. 3 disc lockup in the convertor.

[cobraman302]

Buying a notch and throwing a wittle turbo on it! Although, by the time I find the right notch this will probably be a Spring project...

[skeptiq]

Plan on cleaning up engine bay of un-needed vac lines (smog and egr), replacing the vac lines that are left, lowering springs put on finally, 190 lph fuel pump, afpr, and maybe some upper / lower control arms. The only parts I don't have yet are the control arms. Just need to get the motivation to get that stuff done.

Already wanting spring to be here. Miss driving the stang.

Later
Ben

[cstreu1026]

High RPM NA 2 valve 4.6 build. Its going to be fun launching at 8K. :evilgrin:

[NO SHOT]

Cage& anti roll 4 sure!!:bigthumb

[90 notch]

New member here, just got a clean 90 notch 4 banger, confused which way to go... 4cylinder turbo, or BBF 460 i have starts for both any helpful hints?

[excopcar]

Nice post guys.Who wants too roll all together to cavalcade of customs and were do yah want to meet up at?? I'll bring the digital cam and we can get some video.

[mustangboy]

Mines in the process of getting a t56. Then just some small detail work like replacing the old window tint.

[marauder]

New wheels and tires. Already got this done, but haven't posted any thread because my build isn't anything impressive I'm just happy to own a stang. Still need to get my spacers put on to get rid of my wheel tuck. Things to come are suspension work, and interior reupholstered. If money is good hoping to get new paint, PI head swap, and nitrous.

Other than that, misc. things like evap system codes and PATS warning that need attention. May not get into the bigger mods until the end of 2011.

[Blowpastyou]

removal of old ford technology... transplanting ls1 technology

[excopcar]

Like the watch boys.

[excopcar]

I like this.

[JROUTLAW331]

Well lets see
-bigger turbo
-removable skinny kid carbon fiber nose
-move turbo to front mount with hole in nose
-twin scirroco radiators with fans
-air/water intercooler
-fuel and watercell in trunk
-mini tubs
-cut down 8.8 add 9 inch ends and strange brakes
-30x15.50 rear treads
-removable fiberglass dash
-and rewire and plumb all electrical and fuel and water
hmmmm that should about cover it:D

[Rich]

removal of old ford technology... transplanting ls1 technology


In the white car?

[Steves LX]

Porting heads and changing out some stuff on the rear suspension. Cleaning up engine bay as well.

[INSANEBA]

New tranny and all supporting parts, 3:73's, sub frame connectors, arms in the rear, springs all around, battery in the trunk, hci combo, t body, 3g swap, mark VIII fan, full exhaust, and torque box work. I'll also be working on cleaning up the ol whore, new carpet, few interior panels, and re seal that leaky sunroof! Once cash permits, selling the welds, 5 lugging and going to pro stars too lol... Basically pulling the rad cap and rolling a new car under it! LMAO!

[evil8]

removal of old ford technology... transplanting ls1 technology

Hell yeah!! I knew the coinflip would work.

[jack90gt]

Basically pulling the rad cap and rolling a new car under it! LMAO![/QUOTE]


Love this.... But seriously throwin some new heads I picked up on the car and buying another and gonna try the turbo thing and see what happens

[91boost]

Hopefully i will have my wrecked 06 gt fixed!!

[chad393na]

Freshening up a stock forged piston 302 to bolt the trickflow heads and typhoon intake to. Just built a 2.95 T-5 to replace the worn out 170k original T-5. Getting it tuned for the new combo, and hopefully running tens early in the season.:D.......(hope I didn't just jinx myself!)

[Blackout]

still trying to find time to do the auto swap in my car.

[CNTLOSE]

Pulling the motor on my '88 and either doing a top end rebuild or buying a 306 to replace her with. Repainting engine bay and having some items powdercoated. Also adding all new suspension goodies.