Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Selling the VERT !!! [Archive] - StangBangerz Forums

PDA

View Full Version : Selling the VERT !!!



k062693w
10-25-2010, 02:28 PM
I don't need to or really want to, But with what is going on with me Physically it's just not in the cards right now ...
Here is a link to my build thread ... http://www.stangbangerz.com/forums/showthread.php?t=35349&page=3
Here is a little more detailed thread if you're a member ...
http://www.daytonstangboard.com/forum/showthread.php?t=6049&page=8

The shortblock is assembled, and just needs the top end installed and measured for pushrods, And it will be complete ...

Brief description ...
74 Windsor Block .40 over DSS pistons with dual Valve reliefs, Stock Crank and Rods
Vic Jr. intake
Trick Flow heads just from machine shop(Needs guide plates) and I have flow sheets
Custom Billet Solid roller cam (will give specs to Serious buyers)
Solid roller lifters
1.6 roller rockers
Rocker studs
Complete gasket kit
FMS radiator
MSD 6AL with MSD 2 step
8.8 with 4.10's
electric fuel pump
New swap pan
Welded subframes
4 point harnesses
6 point roll bar
QA1 K-member with UPR A-arms
UPR coil over kit with stock struts 14-150 springs
BBK Chrome Long Tube headers
H pipe with single chamber mufflers dumped
Fat and skinny Welds with like new 165 fronts, Rears have Junk tires ...
I have all receipts and machine sheets

I'm sure I'm forgetting something, And I will add it as I remember !!!
But basically you will get EVERY Mustang item I have !!!

Not included is the BG carburetor, And I don't have a Transmission !!!

A little assembly and a few parts and you will have one of the Cleanest 4 eyed Verts around !!! And it should run good as well !!!

Any questions or specific pictures wanted feel free to PM me !!!

$5,000 :bigthumb



Thanks

Flaming87lx
10-25-2010, 02:39 PM
WHAT???? NO WAY!!!!! I didnt know you was having health issues, I'll put you in my prayers man.... I hope it all works out and you get to finish it....

k062693w
10-25-2010, 02:44 PM
WHAT???? NO WAY!!!!! I didnt know you was having health issues, I'll put you in my prayers man.... I hope it all works out and you get to finish it....
Thanks Troy !!!
I would love to finish it, But if I did there is no way I would be able to race it, The old spine just won't be able to take it ...

draggin50
10-25-2010, 02:47 PM
Damn Aaron... I keep watching for updates on your build on DSB. I hate to see you get rid of it. Good luck buddy and hope you get your back all squared away.

k062693w
10-25-2010, 02:54 PM
Damn Aaron... I keep watching for updates on your build on DSB. I hate to see you get rid of it. Good luck buddy and hope you get your back all squared away.

Thanks Brian !!! :bigthumb


a couple more parts I remembered ...

Hurst Quarter Stick with Cable
Tach with shift light
ARP Head Bolts
Summit Bolt kit (intake, valve covers, timing cover, etc.)
Also engine was balanced with SFI balancer and flexplate (156 tooth)
I need to make it out to the garage and look !!! LOL

k062693w
10-25-2010, 03:18 PM
Also has a Flaming River manual rack and steering shaft ... LOL

RIXXX93GT
10-25-2010, 03:25 PM
Hope everything works out for you Aaron, must be tough knowing your almost done but couldnt drive it like you want. Good luck and hope you get feeling better quick.

jack90gt
10-25-2010, 03:32 PM
Man sorry to hear....Hope all gets better and you can keep it instead of selling it...

k062693w
10-25-2010, 04:19 PM
Hope everything works out for you Aaron, must be tough knowing your almost done but couldnt drive it like you want. Good luck and hope you get feeling better quick.
Thanks Rick ... That is the biggest factor in my decision ... Build a car (that I hope is fast LOL) and not be able to drive it to it's potential ...


Man sorry to hear....Hope all gets better and you can keep it instead of selling it...

Thanks

cstreu1026
10-25-2010, 04:35 PM
Thanks Rick ... That is the biggest factor in my decision ... Build a car (that I hope is fast LOL) and not be able to drive it to it's potential ...


Hell if I were worried about that I would have given up a long time ago. :lol:

Good luck with the sale. That seems like a pretty good price for a very clean vert. Hopefully it will go to a good home.

k062693w
10-25-2010, 05:33 PM
Hell if I were worried about that I would have given up a long time ago. :lol:

LMAO !!! :HYF:



Good luck with the sale. That seems like a pretty good price for a very clean vert. Hopefully it will go to a good home.

Thanks Cam !!! I have more than this in it so far, But in this economy it's hard to give stuff away !!!

k062693w
10-26-2010, 10:38 AM
I will not part out, But may entertain a partial trade ...

k062693w
10-26-2010, 03:02 PM
For $7,000 I'll make a package deal including Olive !!! That's a deal !!!

http://www.stangbangerz.com/forums/showthread.php?t=67760

jack90gt
10-26-2010, 03:24 PM
Damn thats a good looking boat for the age of it....Very clean....

INSANEBA
10-26-2010, 03:46 PM
Good luck buddy, I was really looking forward to seeing what it had, especially with me in teh drivers seat lol! Bump for a CLEAN 4 eye, and a smokin deal on a fresh build...

k062693w
10-26-2010, 04:00 PM
Good luck buddy, I was really looking forward to seeing what it had, especially with me in teh drivers seat lol! Bump for a CLEAN 4 eye, and a smokin deal on a fresh build...

Thanks Brandon !!! You know I would have let you run her, and not even wanted to ride one of those Crazy A$$ bvikes of yours !!! LMAO

05yellowgt
10-26-2010, 04:02 PM
Thanks Rick ... That is the biggest factor in my decision ... Build a car (that I hope is fast LOL) and not be able to drive it to it's potential ...



Thanks
Hell that didn't stop me Aaron! :lol:

k062693w
10-26-2010, 04:11 PM
Hell that didn't stop me Aaron! :lol:

LMAO John !!! But the difference is mine is not for lack of ability, But wanting to be able to walk as long as I can !!!

ibstrokin
10-27-2010, 11:25 AM
I hate to see you get rid of it, but I understand, hope everything works out for you.

marauder
10-27-2010, 11:29 AM
Beautiful vert, sorry to hear the circumstance that will cause you to part ways with it. Hopefully the new owner will finish it and we can see it in the future at cruises.

Good luck with the sale. :bigthumb

k062693w
10-27-2010, 11:50 AM
I hate to see you get rid of it, but I understand, hope everything works out for you.

Thanks Brian !!!



Beautiful vert, sorry to hear the circumstance that will cause you to part ways with it. Hopefully the new owner will finish it and we can see it in the future at cruises.

Good luck with the sale. :bigthumb

Thanks !!!

k062693w
10-30-2010, 10:08 PM
LOCK IT UP !!!

Rich
10-30-2010, 10:16 PM
Did you decide to keep her?