bada$$ solid flat cam 3200-7000 range

[Flaming87lx]

This thing is a thumper!!!!


Brand Crane Cams
Manufacturer's Part Number 364682
Part Type Camshaft and Lifter Kits
Product Line Crane Saturday Night Special Cam and Lifter Kits
Summit Racing Part Number CRN-364682
UPC 021174038989

Cam Style Mechanical flat tappet
Basic Operating RPM Range 3,200-7,000
Intake Duration at 050 inch Lift 244
Exhaust Duration at 050 inch Lift 252
Duration at 050 inch Lift 244 int./252 exh.
Advertised Intake Duration 280
Advertised Exhaust Duration 288
Advertised Duration 280 int./288 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.553 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.572 in.
Valve Lift with Factory Rocker Arm Ratio 0.553 int./0.572 exh.
Lobe Separation (degrees) 108
Intake Valve Lash 0.026 in.
Exhaust Valve Lash 0.026 in.
Grind Number F-280-2
Computer-Controlled Compatible No
Lifters Included Yes
Lifter Style Mechanical flat tappet
Valve Springs Included Yes
Retainers Included Yes
Locks Included No
Valve Stem Seals Included No
Timing Chain and Gears Included No
Assembly Lubricant Included Yes
Pushrods Included No
Rocker Arms Included No
Gaskets Included No
Valve Springs Required No
Quantity Sold as a kit.


These Saturday Night Special cam and lifter kits from Crane are designed for rules-limited oval track racing and ET bracket drag racing applications. For oval track racing, they produce maximum off-the-corner torque, with strong upper rpm horsepower to pull the straightaways. For drag racing, they produce max torque for starting line launch, and the upper rpm power to pull through the gears.

http://www.summitracing.com/parts/CRN-364682/

still new, never started
$200 thats less than half

765-541-0577

[5.0calypso93lx]

So does this include new lifters also?

[Flaming87lx]

So does this include new lifters also?

yes, includes both cam and lifter and both are new. They were installed but never started, I parted the motor before it got put in the car.

[Flaming87lx]

I have new comp hardened pushrods for 351, paid $110, can have for $75 they r for this style of cam

[knockemstiff]

they wont fit in a 347 stroker?

[Flaming87lx]

Cam and lifters will but pushrods wont

[Flaming87lx]

cam, lifters, and pushrods all for $200.... Matched setup for a 351w or cam and lifters will work in any sbf, pushrods for a 351w flat tappet cam..... I need the cash for other things. Thats almost $600 in NEW parts for 1/3 the cost....

[knockemstiff]

offer ya 100 for the cam and lifters if we can ship i pay shiping

[Flaming87lx]

offer ya 100 for the cam and lifters if we can ship i pay shiping

$150 plus shipping and u have a deal

[knockemstiff]

130 u pay shiping and you have them sold

[Flaming87lx]

$150 shipped, It's a $450 kit... Thats the best I will do, I'm giving it away at that price. Thanks

[knockemstiff]

where does this cam compare to most, in like motorsports x303/or e 303 ect,,, what would you say it is most like performance wise? i have had these types of cams b4 i can use them as a refrence. truefully i got 3 x's and a e cam now but can't have too parts am i right

[Flaming87lx]

Well the only type of cam that makes more power is a solid roller. Anytime I've had a solid cam and drive them on the street, they remind me of a dirtbike with a powerband. When you hit the right rpm, they come on hard and they dont let up. Hyd cams seem to start nosing over after 5500 rpms, solid cams make you want to shift at 10 grand cause the power never lets up. They sound unreal, way more sinister than a hyd or hyd roller. And you can never have too many parts lol :bigthumb

[knockemstiff]

140shiped

[Flaming87lx]

140shiped

160 shipped :D

[knockemstiff]

ur going down the wrong way of a one way! lol there is fair offer on the table

[Flaming87lx]

ur going down the wrong way of a one way! lol there is fair offer on the table

I know there is, I offered to let you have it for a $150 shipped and if i have to keep neg, then the price is going up :bigthumb

[Flaming87lx]

Most people get 75% of the new price for new parts which is $340. Half price on used items is usually a very fair price and that would be $225. Now I'm offering you a brand new kit for $150 and its going to cost me $10-$20 to ship. That 30% of new and its new parts. If thats not good enough, then ????

[knockemstiff]

just checking if you got a better offer? I also wanted to let you know my offer still stands as of now!

[Flaming87lx]

just checking if you got a better offer? I also wanted to let you know my offer still stands as of now!

where do u live?

[Flaming87lx]

I will trade for a big hyd roller, stage 3 trickflow, motorsport z, or something equivalent

[knockemstiff]

chillicothe,45601

[Flaming87lx]

How far is hillsboro from u, I'll be there sunday to pick up a motor

[knockemstiff]

40 mins i would say

[Flaming87lx]

40 mins i would say

do you want to meet me there, prob between 3 and 4 in the afternoon?

[Flaming87lx]

do you want to meet me there, prob between 3 and 4 in the afternoon?

I will take that as a no?

[Flaming87lx]

send me $140 knockemstiff, i just want it gone

[Flaming87lx]

I will trade for a 351w intake (carb) rpm or stealth, or will trade for a x or z cam.

[Flaming87lx]

What happened to you knockemstiff, I gave you the deal you ask for and sent you my info? I havent recieved anything in the mail.

[Flaming87lx]

cam, lifters and hardened pushrods still available