Oil pan repair ... anything that fixes leaks?

[331TwistedWedge]

I have a moroso oil pan thats leaking in a few spots ... when the oil pan was dry after powder coating, i tried jb weld on a few cracks ... now its leaking ...

any good chemicals out there to fix this?

[Whyucryn]

Bubble gum. Only use bubblicious from meijers though....watermelon only.

[331TwistedWedge]

Bubble gum. Only use bubblicious from meijers though....watermelon only.

thanks jack ass :flipoff: with a screen name like that, you have to be 12 ...

[lxenvy]

Couldnt u weld it up? Whats it made out of?

[Whyucryn]

thanks jack ass :flipoff: with a screen name like that, you have to be 12 ...

With your name calling and grammar i'd imagine i'm a little older, more respectful, and wiser than you! If you couldn't catch the sarcasm in my post above, I blame you.

[331TwistedWedge]

With your name calling and grammar i'd imagine i'm a little older, more respectful, and wiser than you! If you couldn't catch the sarcasm in my post above, I blame you.

i couldnt catch any sarcasm in that whatsoever ... when you've been through a build that turns out nice, but you have a pos leaky used oil pan to deal with ~ you're not in a good mood ... ha ha ha, bubble gum i get it ... maybe it will be funny when the pan is fixed or pulled off ...

[03z06vette]

With your name calling and grammar i'd imagine i'm a little older, more respectful, and wiser than you! If you couldn't catch the sarcasm in my post above, I blame you.

low post count.... RESPECT YOU ELDERS.:popcorn:

[adragon72]

Pull it off and get it welded. I would hate to see some jb weld shit start leaking at the track.

[03z06vette]

its only takes like 45 min to get the pan off. Just pull it and get it welded...

[Dirtyd0g]

The stock pans do not weld very well. They can be tigged with silicone bronze, but a year later they are usually leaking right next to the weld. I suggest a new pan. Did you check availability on rockauto?
Alan

[rmracing]

I havent had any luck with JB weld on oil pans .My aluminum pan has been welded a few times. Is it aluminum or a steel pan?

[Rick93coupe]

It's an aftermarket pan. It'll weld just fine. I know it's a pain in the ass but pull it off and have someone tig the bad spots. You don't want a nice car and a leaky oil pan, sucks leaving puddles after everyone was just checking out your ride!

[331TwistedWedge]

its a moroso 7 quart ... from sunday til today, it got worse ... dyno tune tomorrow, i have to do something tonight ... or take a mop with me to md ...

a 45 min job to pull a 7 qt moroso? ...

[Johnny O]

http://i168.photobucket.com/albums/u165/xBreakdownTearsx/myspace%20graphics/Cyanide%20and%20Happiness/charles_tape.png (http://i168.photobucket.com/albums/u165/xBreakdownTearsx/myspace%20graphics/Cyanide%20and%20Happiness/charles_tape.png)

x2 on welding it up. Good luck with it.

[03z06vette]

drop the k member out? struts, 8-10 bolts, and a lift..

[331TwistedWedge]

drop the k member out? struts, 8-10 bolts, and a lift..

after leaving a huge puddle at md today, i think its going in the garbage ... there are 3 cracks ... the jb weld quick stick puddy got me to the dyno and back ...

i didnt think about dropping the k-member, but im fried right now ... im tripping balls ... lol ... thats what back to back builds do to you ...

[Dirtyd0g]

I would weld the moroso.
Alan

[BLOWN86CAPRI]

call me,K&M welding,we will fix it 513 582 0559

[331TwistedWedge]

call me,K&M welding,we will fix it 513 582 0559

does it have to be pulled off? ... im sure it does ...

[BLOWN86CAPRI]

Depends on where the cracks are on the pan. Call me and we can talk about it. Thanks, would be glad to help you out. 513 582 0559

[03z06vette]

Depends on where the cracks are on the pan. Call me and we can talk about it. Thanks, would be glad to help you out. 513 582 0559

so i guess you are back on you feet?? good to see ya back..

[BLOWN86CAPRI]

yea,getting back to business,thanks,we just opened a shop in amelia.getting ready to rebuild the capri better and badder i hope,maybe i can stay out of the trees for awhile,lol

[331TwistedWedge]

blown86capri, i will give you a shout ... thanks for the posts/offers ...