Wanted: 9" Rear specifc axle bracket bolts or rear end shops?

[5.0calypso93lx]

I'm not sure if this is going to be easy or hard to find but I just got off the phone with Wilwood tech and I am missing 8 bolts and nuts in my brake kit that are actually OEM Ford 9" "T" headed bolts that hold the axle flange bracket onto the housing itself.

In this diagram they are labeled as "Caliper Bracket Mounting Bolt Kit":

http://www.wilwood.com/BrakeKits/BrakeKitsProdRear.aspx?itemno=140-2118-B

I need 8 of them, 4 for each side, and the nuts as well.

Or if anyone knows of any rear end shops around that might have some laying around from working on 9" rear ends, that would also be very helpful.

[draggin50]

There is 2 different sizes I believe. Depends on the housing ends you are running. I cant remember exact sizes but 1 is for the big 9 inch ends and the other for the medium and small ends.

[Timido]

I am sure moser or currie should carry those

[draggin50]

Here is Currie Enterprises and they are shown at this link.
http://www.currieenterprises.com/cestore/categoriesre.aspx?id=1012

[5.0calypso93lx]

Yep thanks guys, ordered them earlier today from Currie. They are the 3/8 ones.